Check Engine light

[95Blue240sx]

i used the 240sx.org FAQ to figure this out.  code 76 is Fuel Injection System.  and the other is coolent temp sensor.  i can handle the temp sensor.  but help me out on code 76.  where to start?  what could of made this code come up?  i dont think i changed the fuel filter since the factory(i just recieved the car).  any help, thx!

[95Blue240sx]

anyone with a FSM  can you give me a descrption or something?  im sure it says something in there about it.

[BEISSEN]

Ok man here ya go.

76=malfuntion is detected when-
1.Fuel Injection System Does not Operate Properly
2.The Amont Of Fuel Ratio Is Excessive
(The Mixture Is to rich or too lean)

Things to check-
1.Intake Air Leak
2.Front Oxygen Sensor
3.Injectors
4.Exhaust Gas Leak
5.Incorrect Fuel Pressure
6.Mass Air Flow Sensor
7.Lack Of Fuel

This is all from my chiltons manual so non of this is made up all word to word hope this helps.