View Full Version : KVR rotors
uiuc240
08-26-2002, 12:13 PM
Can you resurface the cross-drilled rotors? I'm not sure if mine are warped or just have some deposits on them, but they do pulse a bit. Can they be turned, or is that impossible? <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/sneaky.gif" border="0" valign="absmiddle" alt=':pissed:'> <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/hmmm.gif" border="0" valign="absmiddle" alt=':hmmm:'>
Eric
Itsuki
08-26-2002, 12:27 PM
Nope you cant resurface cross-drilled, or slotted rotors...
HippoSleek
08-26-2002, 01:18 PM
Reason #12 why plain old blanks are better. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'>
The other possibility is uneven pad surface transfer. This causes a feeling just like a warped rotor but can be removed with a very light sanding. Have you used a caliper (the tool, not the part) to check whether they are warped?
uiuc240
08-26-2002, 01:32 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (HippoSleek @ Aug. 26 2002,2:18)</td></tr><tr><td id="QUOTE">The other possibility is uneven pad surface transfer. This causes a feeling just like a warped rotor but can be removed with a very light sanding. Have you used a caliper (the tool, not the part) to check whether they are warped?</td></tr></table><span id='postcolor'>
Not yet. I just wanted to ask and see about resurfacing. I'll do the easy, cheap stuff first. Don't have a set of calipers, though. I'm going to try cleaning them though.
Asad said he resurfaced his with no problems. Just don't want to get past the chamfered area. So reason #12 is moot to me.
Eric
fodive
08-26-2002, 01:44 PM
</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (HippoSleek @ Aug. 26 2002,2:18)</td></tr><tr><td id="QUOTE">Reason #12 why plain old blanks are better. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/wink.gif" border="0" valign="absmiddle" alt=';)'></td></tr></table><span id='postcolor'>
may i ask about the first 11 reasons?
vBulletin® v3.8.11, Copyright ©2000-2024, vBulletin Solutions Inc.