1st SR20 swap, help with some lines I'm confused on

[khilgers]

This is my first SR20 swap so bear with me. It is an S14 into an S14 chassis. I need to no where the following lines connect to. I go the fuel lines figured out, but I have an extra on coming off of the other hard fuel line, and a couple vaccum lines.

to the best of my knowledge this is what I "think" is right.

1) No idea where this goes to.
2) I conected this to the line coming off of the fuel pressure regulator, is this correct?
3,4) I assume that these went to the charcoal canister and since I DO NOT have it what needs to be done with these lines? Take them off completely, "U" them together????
5) No idea where this goes, BOV????

http://www.khilgers.com/forumpics/lines1.jpg
http://www.khilgers.com/forumpics/lines2.jpg

[rps13drift]

I Never touched an s14 sr20 but i think
1 charcoal canister if its not the fuel return
2 and 3 coolant lines for intake mani/throttle body mine arent hooked up
4 you can run to youre bov
5 to youre fuel pressure regulator

I hope this helps

[projectRDM]

1) EVAP vent line, you don't need it.

[zipman72]

Out Of S14 FSM Hope This Helps A Lil.
http://i2.tinypic.com/4oz9elu.jpg