PDA

View Full Version : 17x8 350z wheels and 235/45 tires clear S13 rear fenders....


two240s
04-12-2007, 07:24 PM
without rolling the lips?

1cleanS13
04-12-2007, 07:31 PM
Yes they do. I am rolling on 350z wheels with 235.40.17s in the back and its got plenty of room. A 45 shouldn't be a problem.

na3j nitsuj
04-12-2007, 07:37 PM
just roll it...so you dont have to worry about it next time...

YucA
04-12-2007, 07:50 PM
215/45 F and 245/40 R. no pull or roll needed in the rear. This is with stock arms and it doesnt rub tucking a bit. If you have after market arms and wanna run less camber than what is natural with stock arms, you will need a roll, but that would be all...

http://pics.shorty.org/files/12/LOW3.jpg

two240s
04-12-2007, 08:06 PM
"just roll it...so you dont have to worry about it next time..."

that's the typical zilvia answer I was expecting....

" 215/45 F and 245/40 R. no pull or roll needed in the rear. This is with stock arms and it doesnt rub tucking a bit. If you have after market arms and wanna run less camber than what is natural with stock arms, you will need a roll, but that would be all..."

this is the reason I still come here answer......thanks

YucA
04-12-2007, 08:13 PM
fo sho!! :bigok:

Bryants95240sx
04-12-2007, 11:31 PM
"just roll it...so you dont have to worry about it next time..."

that's the typical zilvia answer I was expecting....

" 215/45 F and 245/40 R. no pull or roll needed in the rear. This is with stock arms and it doesnt rub tucking a bit. If you have after market arms and wanna run less camber than what is natural with stock arms, you will need a roll, but that would be all..."

this is the reason I still come here answer......thanks

Hmm this whole thread coulda been avoided by you searching. <-- Thats a typical zilvia answer, b.c its the truth.

two240s
04-13-2007, 05:18 PM
"
Hmm this whole thread coulda been avoided by you searching. <-- Thats a typical zilvia answer, b.c its the truth."

OK, you do a search and find another thread with the definitive answer to my original question.

OptionZero
04-13-2007, 05:19 PM
you'd find lots of threads telling you how ridiculously simple rolling rear fenders is, which would help you more than someone with the exact same wheels and tires and car