oil restricter fitting

[s13silvia123]

for all of you guys who run oil restrictor fittings for your bottom mount turbos. will the taka or circuit sports line fit the restrictor. or i'll have to get a AN fitting to make it go on the restrictor. if i do what is the AN size fitting and is it the male or female fitting.

[ESone3]

it usually comes with Taka lines.

[s13silvia123]

so i see thanks man but what about the circuit sports lines do they come come with the oil restricter fitting.

[LookOut Nick]

nope, cs lines do not come with the restrictor to my knowledge.
if you need it for a bb turbo you can order the .03 restricter made by taka from heavy throttle ...other wise bottom mount t25 ss lines by cs are direct bolt on

[s13silvia123]

nope, cs lines do not come with the restrictor to my knowledge.
if you need it for a bb turbo you can order the .03 restricter made by taka from heavy throttle ...other wise bottom mount t25 ss lines by cs are direct bolt on


i'm not running a t25 at the moment i'm running a gt2540R right but i havent put any lines on cause i figured it out i needed a restrictor thats why i didnt put on cause i needed it. now i've just order the CS lines and the restrictor. will i need a AN fitting to fit both on with each other or is it just a direct bolt on.

[bgindn]

The restriction fitting I had custom machined will fit right on to my exsisting Taka lines. However you can use them with any -3 oil line. They restriction fitting gets threaded right into the turbo.

Will my restriction fittings fit the CS lines? They should if the oil line is -3.

If you want to see a picture of the restrictor up close, check out my webpage, hopefully the pics answer your questions.

harp

[s13silvia123]

plus one for everyone who helped me.