Code P1105 Please Help!!!

[gotta240]

I keep getting a CEL and the code is P1105.

The scanner says

P1105
Air Metering
Manufact. Conrtol Fuel Air Metering.


I have replaced the maf with THREE different ones, replaced the MAF plug, and replaced the 02 sensor.

PLEASE HELP. WHAT CAN THIS BE?!?!

[gotta240]

anyone? please!!!

[MURPHY]

hmm.. try the self diagnoses way see what code it throws that way

[gotta240]

will do. brb

[gotta240]

ok..

They read

132- 13 long blinks, 2 short

77- 7 long blinks, 7 short.

HELP PLEASE!!!!

edit- i'm so f'ing bad at searching i can't even find the list of obd2 ecu codes...

[MURPHY]

77 is rear o2 sensor.

134? they don't eve have a 134 code lol

[MURPHY]

http://www.ka24development.com/ecu_codes.html
http://www.240sx.org/faq/articles/ecm_codes_doch.htm

i think you're reading codes wrong... its short then fast

sounds like a 77 cause that makes since. then 13 (coolant temp also would make since) and the 3rd code? idk recheck. maybe camshaft position sensor. if you can't figure the coeds out just tell us what kind of symtomps your having besides the obvious CEL.

running rich? if so then 13 makes since

[gotta240]

Hmmm. Why would BOTH my o2 sensors be bad? (or did the reader i rented at autozone tell me the wrong thing?) It told me 3 codes

P0135- 02 sensor heater circuit malf. Bank 1 Sensor 1
(this is the FIRST 02 sensor near the head)

P0125 Closed Loop Fuel Control (insufficiant coolant temp)
(i assumed this was the coolant temp sensor)

I replaced BOTH the coolant temp sensor AND 1st 02 sensor... Do you think it told me the first one by mistake or that they are BOTH bad... If BOTH are bad, what caused that?(stock na ka)

I'll get to the third/last code of P1105 once these two are diagnosed/fixed. Thanks again man.

[MURPHY]

umm. obd2 right? when you replaced the things did you start car back up? did you clear the codes? lol

[gotta240]

lol. Yeah, i THOUGHT i did... Wait... I KNOW i did...

I reset the ecu manually(i usually use the autozone scanner) and got a 55 code. I was like, "WTF, i thought it would clear the codes!!" Then i realized it was a "everything is o.k code"...

I'll reset it AGAIN and see what happens.. keeps suggestions/ideas coming!!!