PDA

View Full Version : "jdm Parts" Help!!!!!


rongfk
12-30-2006, 02:05 PM
:aw: ok, I have a 91 s13 hatch standerd modle. I bought some power folding mirrors, but the wires were cut short on them so they have no plugs, I also have the switch aswell. The problem, my car has manual everything, so how can i wire them up?

nissan90sileighty
12-30-2006, 02:34 PM
i think you can do a direct connection to a 12v source, or u can to to your fuse box, and wire it to a switch(either way ull need a fuse a switch and a 12v power source(not your cigg lighter)... thats juss cheesey

projectRDM
12-30-2006, 03:43 PM
Wrong. The folding mirrors are reverse polarity, you'll need a SPDT switch or a pair of relays to make them fold.

The FSM has all the wiring schematics, you could use a little thought and actually read it for all your questions.

Dutchmalmiss
12-30-2006, 07:56 PM
any write-ups on this install because i too have a set i wanna install on my base model s13. where can i get fsm's anyways?

rongfk
12-30-2006, 10:31 PM
does anyone have any links to get that fsm info for free?

HalveBlue
12-30-2006, 11:28 PM
www.camel-towing.com for FSM.

Good Luck!