My 240's Alignment Specs

[Jesses240]

Ok I just thought I'd post this up for people who are curious of alignment specs.


I like to Road Race and Drift and my setup right now (beside the power levels) is perfect for it.


For Suspension/grip I have KYB AGx's with pro-kits, sparco wheels w/ kuhmo 711's I have the rears set at 6 and the fronts on 1 (one of them is stuck on setting 1 i have to get it warrentied out)

Anyways I work at a general repair independent shop in tualatin, Oregon and we have a laser alignment rack and this is the specs of how I have my car setup. if you need/want alignment and your in the Oregon area we can do it but im not sure if its ok to post the shop info... contact me through pm or e-mail if you do need something done.

All this is in Degrees btw

FRONT Left Right

Caster 6.46 6.96
Camber -1.1 -1.02
Toe .07 .06 (total is .13)

REAR Left Right

Camber -1.6 -1.61
Toe .12 .08 (total is .20)

Thurst angle is .02

Left Right
SAI 13.97 14.13




Here are the specs for a 91 240sx in case you go to a different shop to get your alignment done. It's probably about the same for other years but don't quote me on it
(Remeber all in degrees)
Both Sides
Caster 6 to 7.5
Camber -1.5 to 0
Toe .03 to .09 total .06 to .19


Camber -1.67 to -.67
Toe 0 to .19 total .00 to .38

[Dousan_PG]

ooh alignment thread post cool

s14 250rwhp
front:
caster tad over stock
camber -3
toe 0
rear:
camber -1.5
toe 0

s13 350rwhp
front: camber -2.75
caster: tad over stock
toe: 0

rear: camber -2
toe 0

[Kaotik25]

getting my alignment done soon...thanks for the thread starter

[nrg]

front:
Camber: -2.4
toe: 0
caster: alittle over stock

rear:
Camber: -1.7
toe: 0

[articdragon192]

Recommended by Hiro's for grip
Front:
Camber: -2
Caster: 6.5
Toe: 0

Rear: -1
Toe: sligh toe in (around .6 -.8)

What I'm runing due to no adjustable RUCA

Front:
Camber: -2
Toe: 0
Caster: 6.7

Rear: -2.3
Toe: -1.2