PDA

View Full Version : wheel fitment 16x7

toNE
09-18-2006, 01:17 PM
Would anyone know if rim size 16x7 OFFSET +38mm Front and Back fit flush on a stock S13 HATCH?

Thanks
Yuri
09-18-2006, 03:44 PM
Only if you feel like running a 35mm spacer:
http://i22.photobucket.com/albums/b321/Yurikaze/frontspacer.jpg
Flybert
09-18-2006, 03:56 PM
+0 offset on a stock 240sx looks mexicali. Keep it sunken in a little and it looks tasteful. I'd go with a slightly lower offset but not +0 unless you lowered it and have camber.
Yuri
09-18-2006, 04:05 PM
missed the stock height part.
15-20mm offset on a 7 at stock height looks decent.
SiI40sx
09-18-2006, 05:43 PM
yea i have meshies 16x7 +17 and theyre pretty flush Ill take pics later
toNE
09-19-2006, 10:16 AM
Anyone running 16x7 with similar offset on a lowered car? How sunken in are they?
Cloud9
09-19-2006, 12:43 PM
I have 16x8's with a 10 offset and they fit perfect, they dont stick out at all but very very close, i have coilovers and streched tires (205's). 16x7 with any offset above 5 will be sunken.
drew935
09-20-2006, 04:29 PM
I'm running S14Se 16.6.5 et40 on my S13 with 215/50 16. I have a 20mm Kics spacer all around. Cambered a lil bit. 1.2 on the front and 1.5 (somewhere around there) on the rear. I'm riding on Cusco Zero2s. A pic from the front. As you can see it's just about flush with a 3 finger gap.

http://img.photobucket.com/albums/v317/drew935/th_DVX00010.jpg (http://img.photobucket.com/albums/v317/drew935/DVX00010.jpg)http://img.photobucket.com/albums/v317/drew935/th_DVX00011.jpg (http://img.photobucket.com/albums/v317/drew935/DVX00011.jpg)