KA24DE Water Pump install.

[Ryencool]

So I'm about to replace the water pump after installing a new koyo rad last week (go figure the pump goes out the next week). Is there a write up anywhere for this and if not would one be wanted by anyone? Seems pretty straight forward but if anyone has info I might need to know that will help please let me know. Thanks!

[projectRDM]

1) Remove old pump.
2) Install new pump.
3) Bleed coolant.

If you installed the radiator without issue, you don't need a writeup for the water pump.

[Jung918]

Take off shroud, fan, fan clutch, then the pump.

[sw20>>s14]

just make sure to tension the belt within the proper range...

[kandyflip445]

Or it will go out faster than it should...

[Neejay]

As already stated:
- Drain coolant
- Remove belts (loosen brackets, etc.)
- Remove fan (4 small bolts)
- Remove water pump (few bolts)

It's easy.