PDA

View Full Version : where can i find rubber for the qrt glass?


bo2o
09-13-2006, 12:46 AM
does any one know where can get new rubber for the qrt glass?

its the rubber that goes around the qrt glass. im pulling it off because im painting my car.

koukimonster139
09-13-2006, 06:13 AM
what car?
most quarter glass is encapsulated meaning you have to replace it after removing it. the seal is samiched in between the glass.

fuckin tape that shit off
fine line tape, 3/4" tape

smily_vigor
09-13-2006, 06:28 AM
If it's on the 240sx coupe (180sx) then don't take it off because you have the get the glass with the rubber already on it. If that the model you have I don't even think Nissan seels it without you buying the entire glass with the rubber around it.

gotta240
09-13-2006, 06:50 AM
and it isn't cheap.


If you need an s14 one, i may have one to sell. Pm me if serious.

WilloW
09-13-2006, 07:58 AM
If it's on the 240sx coupe (180sx) then don't take it off because you have the get the glass with the rubber already on it. If that the model you have I don't even think Nissan seels it without you buying the entire glass with the rubber around it.
That shit is like $375.

projectRDM
09-13-2006, 08:01 AM
All OE quarter glass is sealed with the moulding in place, if you remove it you risk damaging both pieces, requiring a new window.

Heat it up a little with a heat gun until it's pliable and then wedge a stiff piece of wire underneath it, that will hold it up off the body and allow the paint to get behind it. If you've already pulled it free, hope the glass came out too, otherwise break out the wallet.

koukimonster139
09-13-2006, 09:19 AM
or use aperature tape, similar to using a piece of stiff wire, but acts as a better wedge

bo2o
09-13-2006, 03:25 PM
thanks guys


cause i was at the shop and my friends hatch is there and they pulled it off?

wonder WHY.

i pulled mine off like 5 inches im prolly going to glue it back on wit a heat gun and window sealant.