PDA

View Full Version : Has anyone used speedbleeder?


NoOneIsPerfect
09-01-2006, 08:31 PM
Just curious if any of you on here has used speedbleeder from www.speedbleeder.com before.

Useful? Junk?

Any comment is appreciated.

LookOut Nick
09-01-2006, 09:18 PM
very useful get it

projectRDM
09-01-2006, 10:23 PM
No, no one in the World has ever tried a product that's been out for six plus years. No one. At all.

slideways2004
09-01-2006, 10:52 PM
No, no one in the World has ever tried a product that's been out for six plus years. No one. At all.

lmao!

it's a good product. get it!

g6civcx
09-02-2006, 06:58 AM
Make sure you don't overtighten. They tend to leak a little bit. Just back off and retighten a little bit. If you try too much it'll snap the bolt.

http://www.speedbleeder.com/install.htm

Jung918
09-02-2006, 08:09 AM
I got it for my clutch slave cylinder and also for my brakes. They make bleeding brakes so much easier. Don't have any complaints.

HalveBlue
09-02-2006, 02:29 PM
I have some on my front brakes and on the clutch cylinder.

The one on the clutch cylinder snapped, although that's probably due to my overtorqueing it.

No complaints otherwise.

wootwoot
09-02-2006, 02:47 PM
No, no one in the World has ever tried a product that's been out for six plus years. No one. At all.


Dick!!.................

brainfood
09-02-2006, 02:47 PM
anyone have the part number for clutch slave and also z32 brakes?

Nuisance Crew
09-02-2006, 02:54 PM
is it the same size for the cluch slave as for the brakes? SB1010? thanks!

OptionZero
09-02-2006, 02:56 PM
aren't all Nissans the same size? not sure if it crosses with Infiniti, my 240sx ones didn't seem to work on my q45 calipers

Jung918
09-02-2006, 10:28 PM
The size for both the 240 and q45 is SB1010. The size for the slave is SB7100S. I got mine from splparts.com

When you tighten them, just make sure they are snug. There is no need to go crazy tightening them.

http://www.speedbleeder.com/automobile_applications.htm#Infiniti

dopeassjackson
09-02-2006, 10:56 PM
you can get a hand operated vac pump from auto zone for like $25 that got a vac bleeder attachment that will work on any car, and van bleeding is better and easier than speed bleeders. i got one and use it on all my brakes/ clutch works great no air in the system at all

misfitsfreak81
09-21-2006, 12:28 PM
speedbleeders are the way to go. no questions asked. you can bleed your brakes and clutch by your self in under 15 mins. they do leak just the smallest amount though sometimes. totally worth it though.

n2motorsports
09-21-2006, 03:32 PM
i've used it before, I swapped back to the oem's. very tiny dribble and I don't think it's a 10mm b/c my cresent wrench kept stripping it with minimal force.

it's just as easy to get a tube and connect it to the bleeder with the other end in some clean brake fluid. I finishing bleeding in less than 10 mins flying solo.

kouki_s14
09-21-2006, 04:27 PM
www.splparts.com

i got it for my slave and brakes, works great

brainfood
09-21-2006, 05:34 PM
Just did my clutch on the new chassis. Had problems in the past with nissan clutches on a fresh system. Completely dry new slave and it took about 2min. Worked great!

S13 Charlie
09-22-2006, 12:45 PM
i've used it before, I swapped back to the oem's. very tiny dribble and I don't think it's a 10mm b/c my cresent wrench kept stripping it with minimal force.

it's just as easy to get a tube and connect it to the bleeder with the other end in some clean brake fluid. I finishing bleeding in less than 10 mins flying solo.

If by Crescent, you mean adjustable wrench, then that's why you're bolt was stripping. Those wrenches are terrible.

But, on topic, I have a speedbleeder on my clutch slave cylinder and it worked great, I bled the clutch myself, without any problems in 5-10 minutes.

Dousan_PG
09-22-2006, 01:56 PM
brainfood
i left the speedbleeder on my slave with the car u got
i totally forgot! now i gotta order another one hahaha
d'oh!

brainfood
09-22-2006, 06:14 PM
brainfood
i left the speedbleeder on my slave with the car u got
i totally forgot! now i gotta order another one hahaha
d'oh!

I ordered a new one and saved your old one. you can get it whenever I still have it.

slideways2004
09-22-2006, 10:53 PM
I ordered a new one and saved your old one. you can get it whenever I still have it.

damn. now that's a real pal.