d4rkpri35t
08-22-2006, 11:05 PM
Looking for transmission out of a 96-98. Also looking for other parts for swap.
Shifter
Release Bearing
Pressure plate
Clutch
Flywheel from a m/t
M/T Mounting plate
Flywheel Bolts (m/t bolts are longer than a/t bolts)
Clutch pedal
Brake pedal (From M/T car)
Clutch master cylinder w/ resevoir
Clutch slave cylinder
Clutch hydraulic lines (Main line, bleeder line, rubber line to slave cylinder)
Drive shaft front & rear section
Adapter bolts & nuts for mounting crossmember to the 5 speed (2)
Reverse light sensor, Neutral position sensor, 5th gear sensor (on side of 5 speed)
Lower shift boot & plate
Upper Shift boot & Finisher plate.
I have around 500-600 bucks to play with. and i live in Texas.. so the closer the better. Thanks
Shifter
Release Bearing
Pressure plate
Clutch
Flywheel from a m/t
M/T Mounting plate
Flywheel Bolts (m/t bolts are longer than a/t bolts)
Clutch pedal
Brake pedal (From M/T car)
Clutch master cylinder w/ resevoir
Clutch slave cylinder
Clutch hydraulic lines (Main line, bleeder line, rubber line to slave cylinder)
Drive shaft front & rear section
Adapter bolts & nuts for mounting crossmember to the 5 speed (2)
Reverse light sensor, Neutral position sensor, 5th gear sensor (on side of 5 speed)
Lower shift boot & plate
Upper Shift boot & Finisher plate.
I have around 500-600 bucks to play with. and i live in Texas.. so the closer the better. Thanks