I need the thinest fan's made for my rb swap.

[95s14]

I need 2 pull type fans. They need to be SUPER small as I have a koyo radiator in right now and there is not much room on the inside :}

Let me know the thinest ones you can find and a link to look at them and a price range for them as well as any local shops in the 626 are that sells them.


Thanks again guys. PM's would be better if you can pm me.

[FRpilot]

i think the flex a lite are the thinnest aftermarket fans available. for push or pull all you have to do is reverse the wiring

[Yellow4g63]

Use the Flexa lite fans and cut into the front support and move the radiator forward. you will have lots of room that way. On the S13 you can do this too but you can only tilt it forward and not move it forward.

[95s14]

whats the thin fan they have that will fit mine? I saw it as a 2 set fan in a enclosed case that was like 2 inches thin. Need more pics of it to make sure it will fit.

[FRpilot]

spoon feeding you again... flex a lite fans

[DrtyRat]

Use the Flexa lite fans and cut into the front support and move the radiator forward. you will have lots of room that way. On the S13 you can do this too but you can only tilt it forward and not move it forward.
+1 on this... my buddy is dropping an rb26 in his s14 and this is what he's doing

[trsilvias13]

just mount the fan infront of the radiator.


FAL is as thin as you can get on the market with good cfm rating

[95s14]

what I was asking is what is the modle number for the fan? they have a ton of different ones on their website.

I just dont know what modle I saw that was the super thin ones.

[sideview_180sx]

check on some nissan related sites, they sell the FAL fan setup already and prolly include part #. search more. sheesh

[Yellow4g63]

Flexa Lite #210 or #220 there 2500cfm and low profile fans.

[s13silady]

95S14 = Steven is that you?

[sliEighty]

just put the fans infront of the rad and push the air instead of pulling it

[LB.Motoring]

^ but you need to make a good shroud, or else its pretty much worthless...

http://www.qualityroadsters.com/images/roadster_fan_shroud.jpg