PDA

View Full Version : Need help with LSD fitament problem *Pix* (s14 1997 chassis)


mmdb
06-04-2006, 12:52 AM
The LSD shown in the picture doesn't fit the bolt pattern of the open diff I have in the car now. The two mounting bolts on the cover of the LSD are too close together to bolt up to my subframe. Is there a way to remedy this? I've been told that this is a Nismo GT Pro LSD with 4.4:1 gear ratio. I've also included pictures of the numbers on the gear. Anyway advice/info is appreciated. Thanks.

http://i7.photobucket.com/albums/y259/mmdb/Misc/IMG_3598.jpg

http://i7.photobucket.com/albums/y259/mmdb/Misc/IMG_3600.jpg

http://i7.photobucket.com/albums/y259/mmdb/Misc/IMG_3604.jpg

slider2828
06-04-2006, 12:58 AM
Can you switch covers from your stock open LSD to this diff? Because I know the pumpkin is possibly different, but the covers might work perfectly. Try it.

mmdb
06-04-2006, 01:21 AM
Yeah i compared the two diffs and the sizes are completely off. On the casing of the picture shown above says it was from an JDM s14 with an sr20de.

slider2828
06-04-2006, 01:40 AM
well then you might wanna swap out the internals and find some info whether if it works in the sr20det diff.... Should have done more research.

RightWheelDrive
06-04-2006, 02:21 AM
FYI...thats a 4.083 gear ratio.

timeless24
06-04-2006, 08:19 AM
I Agree With Silder2828

Dousan_PG
06-05-2006, 01:03 AM
thats no s14 diff
swap the guts


even the guts dont look like r200
i dont know. anyways swap guts to another diff first. see how it is

yes its 4.08 final drive (49 divided by 12= 4.08333333)
is the ring gear held in by 10 bolts?