how to bypass clutch lockout switch

[s13monkey]

i know that it may be in the FAQ but i have no time to go look for it so can some one please help me with this problem i have read the auto to 5 speed swap f.a.q but that really did help me can some on send me pic on how or are the relay is at the box next to my battary. or a link that shows the step by step

[tre]

I belive all you do is ground it out.

Dunno how its set up i never bothered with it

[ledzeppelin240]

Ok fine here is how is should be done:

-You trace the BLK-WHT wire that comes from your Ignition Switch and would have gone to the Inhibitor Switch on your A/T Tranny.
-Cut it at the Inhibitor Switch.
-Your trace the BLK-YEL wire coming off the starter and it goes back to the Inhibitor Switch.
-Cut it at the Inhibitor Switch.
-Now solder and heatshrink the BLK-WHT wire to the BLK-YEL wire.

You no longer have any Inhibitor Switch or Clutch Interlock Switch, its a direct connection between IGN. Switch and Starter Motor.

Here is a wiring diagram.
http://www.imagestation.com/picture/sraid205/pfc9e35cc1bf6623ef0d8b75042613a00/ef3d5e84.jpg