PDA

View Full Version : Dyno w/HKS 264 Step 2 cams

R33GTS-T
02-09-2006, 11:11 AM
I'll post up pics of my dyno chart once i get home from school. In the meantime though, i have an SR20DET redtop with 3" turbo back exhaust, large core FMIC, OEM T25, OEM injectors, OEM MAF, 1.2mm headgasket, Walbro 255 fuel pump, Z32 fuel filter, HKS step 2 cams and adjustable gears, SAFC II, and an AVC-R.

At stock boost (.5bar) w/the AFC tuned the car laid down 209whp and 199wtq on a Dynojet with A/F ratios of mid 11s across the board with a very smooth power curve. I hope to be able to tune the car for high boost in the upcoming week.

During the course of the summer I hope to get some engine management, upgrade the remainder of the fuel system, and upgrade the turbo and manifold all for 350-400whp.

Late,
Daniel
wootwoot
02-09-2006, 11:32 AM
Post the chart! I'm curious to see the curve with the step 2's
Flybert
02-09-2006, 11:36 AM
Did you install them just to see what they do because stock cams work better with t25's than upgraded cams.
R33GTS-T
02-09-2006, 11:45 AM
i get outta class at 4:00.....i'll post up the charts once i get home

no i didn't install the cams. the cams, gears, and head gasket were already installed on the engine in the clip i ordered. i know the cams are a little overkill at the moment, but they'll be just right when i upgrade the last few parts to make more power :rawk: besides, the lopey idle sounds great :cool:
richardxfeng
02-09-2006, 12:32 PM
No valve springs upgrade?
nissantuner22
02-09-2006, 12:47 PM
No valve springs upgrade?

Ditto. Only HKS stage one cams dont require a valve spring upgrade. After that, you run into float. Curious if you just didnt list it, or you dont know if you have them
wootwoot
02-09-2006, 04:07 PM
Did you install them just to see what they do because stock cams work better with t25's than upgraded cams.


Funny you say that... I remember driving an sr20det with upgraded cams (unknown) and a t25 and it was super beneficial to it in everyway possible in the powerband.
R33GTS-T
02-10-2006, 06:35 AM
No valve springs upgrade?
oops, i was thinking it as i was typing up the list of engine mods but ended up not typing it lol. the head does have the upgraded HKS valve springs
Angel
02-10-2006, 07:04 AM
Funny you say that... I remember driving an sr20det with upgraded cams (unknown) and a t25 and it was super beneficial to it in everyway possible in the powerband.


And don't tell it to the fwd guys that have been doing it for years with good results.
wootwoot
02-10-2006, 03:21 PM
POST THE DYNO:axe: :axe: :axe: :axe: :axe:

You could atleast say where peak hp/tq were!!
fliprayzin240sx
02-12-2006, 05:43 AM
I soo need to install my Step 2 272s...Just been lazy and yet to find a shop who would tweak the cam gears. I hate playing with timing...
R33GTS-T
02-12-2006, 03:25 PM
POST THE DYNO:axe: :axe: :axe: :axe: :axe:

You could atleast say where peak hp/tq were!!
i have an iMac and the dyno charts i was sent from the shop won't open :(

they're in *.drf format, and the Winpep7 program (dyno program) isn't available for Mac. anybody have any suggestions as to how I can get these files open so I can convert them into a *.jpg format and post them up???
DJPimpFlex
02-12-2006, 07:19 PM
send them to me and I'll see if I can post them up. [email protected].