17x8,17x9 Impul C1 Dual 4/5 lugs pattern - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

JH · 09-21-2004, 05:26 PM

Selling a set of used Impul C1 wheels. 17x8 in the front +36 offset. 17x9 in the back +38 offset. Dual pattern 4lugs and 5lugs by 114.3. Center caps included. This is the only the second set I have seen in the US, and the only set that I know of that is 17x8 and 17x9. True JDM look. 3-piece wheel design.

Here is what it looks like on an s13:

Front wheels:

Rear wheels:

Close up of the center cap, please don't mind the dirt after the rain:

Dual bolt pattern:

Rear fitment on the car, this is with -2.5 degree of camber:

Front fitment on the car, this is with -1 degree of camber and a 9mm spacer, effectively making this a +27 offset wheels:

There will be no tires with the wheels, since they are worn. Just FYI, the front in the pic is 215/45-17 on the 8 inches wide front wheel, and the rear is 235/45-17 on the 9 inches wide rear wheel.

Wheels have plenty of clearance for large calipers due to the design, will fit any of the big calipers upgrade that you can throw at. As long as the rotor/caliper fits inside 17inch diameter, the caliper offset will never hit the inside face of the wheel. I run Tein coilover, and I like the front to be more flushed for the look, so I chose 9mm spacers to bring the wheel more out. With the OTG (OneTonGarage) spacer on the front wheel, I clear my Tein coilover. I have no idea how well they will clear stock suspension piece or other after market brand, but my setup-as-described clears by quite a bit, just fyi.

Wheels are true and no cracks. Minor scratches on rim edges from street use. The clear coat on wheel is starting to age, so what you see in the pictures that looked like tiny scratches are not on the metal but on the coating itself.
Pictures are current, taken a week ago. That's how the wheels look now. So the wheels look great as is.

Asking for $800 OBO. Shipping will be extra, depending on the method that you wish to ship by. Local pick up welcome, San Francisco Bay area - San Jose.

email at jho@appsig.com

iggy · 09-21-2004, 06:50 PM

wow, those wheels are very different/unique.. good luck with the sale

..

JH · 09-22-2004, 03:43 PM

Guys,

Please reply by going to the email listed in the message: jho@appsig.com

I rarely check PM, or people's PM box is always full, so that just doesn't work. And sending an email through the forum software always ends up in the SPAM folder in my email and gets deleted, so I will never see your email if you send it that way.

...so therefore, PLEASE USE THIS EMAIL -> jho@appsig.com

91rusty240sx · 09-22-2004, 06:37 PM

wow, your car looked like a corvette for a second... interesting wheels. how heavy are they?

**mrmephistopheles** · 09-22-2004, 07:33 PM

Me likey. If I had more money to play with I'd pick them up.

bing · 09-22-2004, 08:06 PM

yeah those are sicko...

i have impuls too, love em... sooo rare

jy116 · 09-22-2004, 08:29 PM

beautiful flushness... AND looks like s13s were made for 17s!

Ritz S14 · 09-22-2004, 08:46 PM

man.. I thought it was an FC till I took a second look.

HyperTek · 09-23-2004, 04:51 PM

hehe they must be easy to clean...

im seriously thinking about it.. its unique.

mbmbmb23 · 09-23-2004, 09:35 PM

Those are super old skool hot. Ive seen em on ebay before. Ive often wondered what they'd look like if you powdercoated the centers and centercaps black.

-m

***ThatGuy*** · 09-23-2004, 10:45 PM

Quote:

Originally Posted by mbmbmb23

Those are super old skool hot. Ive seen em on ebay before. Ive often wondered what they'd look like if you powdercoated the centers and centercaps black.

-m

Like Shiney Steelies?

JH · 09-29-2004, 04:39 PM

I will be going to LA/San Diego area this weekend (10/2 - 10/3). So if you are a socal buyer, I can deliver it to your door. Save your money from shipping. Contact me before Friday, and I will need to see some money. I can't carry them to socal and back to norcal, because I actually need ALL the room in the car to carry stuff back to norcal. So no mind-changing at the last minute.

toledo240 · 09-30-2004, 09:26 AM

nice unique wheels rear needs camber adjustment? front? and what i really want to know is how did you do that to your headlights?

philbro · 09-30-2004, 12:16 PM

interested in a trade for some money and a set of rare volk meshies? let me know.
pbrowne81@hotmail.com

CPARKPowertrix · 10-01-2004, 01:27 AM

Quote:

Originally Posted by JH

I will be going to LA/San Diego area this weekend (10/2 - 10/3). So if you are a socal buyer, I can deliver it to your door. Save your money from shipping. Contact me before Friday, and I will need to see some money. I can't carry them to socal and back to norcal, because I actually need ALL the room in the car to carry stuff back to norcal. So no mind-changing at the last minute.

Hello,

I emailed you at jho@appsig.com. Please bring them with you and we'll meet on Saturday. Feel free to call me to confirm. Thanks.

09-21-2004, 05:26 PM	#1
JH Zilvia Member Join Date: Dec 2002 Location: blah Posts: 153 Trader Rating: (0)	17x8,17x9 Impul C1 Dual 4/5 lugs pattern Selling a set of used Impul C1 wheels. 17x8 in the front +36 offset. 17x9 in the back +38 offset. Dual pattern 4lugs and 5lugs by 114.3. Center caps included. This is the only the second set I have seen in the US, and the only set that I know of that is 17x8 and 17x9. True JDM look. 3-piece wheel design. Here is what it looks like on an s13: Front wheels: Rear wheels: Close up of the center cap, please don't mind the dirt after the rain: Dual bolt pattern: Rear fitment on the car, this is with -2.5 degree of camber: Front fitment on the car, this is with -1 degree of camber and a 9mm spacer, effectively making this a +27 offset wheels: There will be no tires with the wheels, since they are worn. Just FYI, the front in the pic is 215/45-17 on the 8 inches wide front wheel, and the rear is 235/45-17 on the 9 inches wide rear wheel. Wheels have plenty of clearance for large calipers due to the design, will fit any of the big calipers upgrade that you can throw at. As long as the rotor/caliper fits inside 17inch diameter, the caliper offset will never hit the inside face of the wheel. I run Tein coilover, and I like the front to be more flushed for the look, so I chose 9mm spacers to bring the wheel more out. With the OTG (OneTonGarage) spacer on the front wheel, I clear my Tein coilover. I have no idea how well they will clear stock suspension piece or other after market brand, but my setup-as-described clears by quite a bit, just fyi. Wheels are true and no cracks. Minor scratches on rim edges from street use. The clear coat on wheel is starting to age, so what you see in the pictures that looked like tiny scratches are not on the metal but on the coating itself. Pictures are current, taken a week ago. That's how the wheels look now. So the wheels look great as is. Asking for $800 OBO. Shipping will be extra, depending on the method that you wish to ship by. Local pick up welcome, San Francisco Bay area - San Jose. email at jho@appsig.com Last edited by JH; 09-22-2004 at 01:57 AM. Reason: additional info

09-22-2004, 03:43 PM	#3
JH Zilvia Member Join Date: Dec 2002 Location: blah Posts: 153 Trader Rating: (0)	Please reply by EMAIL Guys, Please reply by going to the email listed in the message: jho@appsig.com I rarely check PM, or people's PM box is always full, so that just doesn't work. And sending an email through the forum software always ends up in the SPAM folder in my email and gets deleted, so I will never see your email if you send it that way. ...so therefore, PLEASE USE THIS EMAIL -> jho@appsig.com

09-22-2004, 06:37 PM	#4
91rusty240sx Zilvia Junkie Join Date: Oct 2003 Location: Los Angeles, CA Age: 24 Posts: 433 Trader Rating: (0)	wow, your car looked like a corvette for a second... interesting wheels. how heavy are they? __________________ Tony

09-22-2004, 08:06 PM	#6
bing Post Whore! Join Date: Oct 2001 Location: ontario canada Posts: 2,504 Trader Rating: (11)	yeah those are sicko... i have impuls too, love em... sooo rare __________________ CHEAPEST ANYWHERE::: screamer pipes, sway bar endlinks, turbo elbows, solid bushings and more http://zilvia.net/f/advertiser-speci...hings-etc.html www.bings.ca www.son240sx.org www.torontonissan.ca www.onyxsyndicate.com

09-22-2004, 08:29 PM	#7
jy116 Zilvia Addict Join Date: Aug 2003 Location: Berkeley, CALifornia Posts: 773 Trader Rating: (0)	beautiful flushness... AND looks like s13s were made for 17s! __________________ http://img.photobucket.com/albums/v1...ZilviaSig3.jpg AGX w/ boots $500obo, Momo Start $250

09-21-2004, 06:50 PM	#2
iggy Zilvia Junkie Join Date: Nov 2001 Location: Sac to the Bay Posts: 518 Trader Rating: (0)	wow, those wheels are very different/unique.. good luck with the sale ..

09-22-2004, 07:33 PM	#5
mrmephistopheles No time for the jibba-jabba! Join Date: Mar 2002 Location: BFE Age: 8 Posts: 13,920 Trader Rating: (3) Rides Gallery: mrmephistopheles	Me likey. If I had more money to play with I'd pick them up.

09-22-2004, 08:46 PM	#8
Ritz S14 Post Whore! Join Date: Jul 2004 Location: C A L I F O R N I A Age: 27 Posts: 3,606 Trader Rating: (0)	man.. I thought it was an FC till I took a second look.

09-23-2004, 04:51 PM	#9
HyperTek Post Whore! Join Date: Mar 2003 Location: Cali Posts: 11,045 Trader Rating: (0)	hehe they must be easy to clean... im seriously thinking about it.. its unique. __________________

09-23-2004, 09:35 PM	#10
mbmbmb23 Zilvia Contributor Join Date: Oct 2001 Location: Charlotte, NC. Posts: 1,766 Trader Rating: (0) Rides Gallery: mbmbmb23	Those are super old skool hot. Ive seen em on ebay before. Ive often wondered what they'd look like if you powdercoated the centers and centercaps black. -m __________________ 400x200

09-29-2004, 04:39 PM	#12
JH Zilvia Member Join Date: Dec 2002 Location: blah Posts: 153 Trader Rating: (0)	I will be going to LA/San Diego area this weekend (10/2 - 10/3). So if you are a socal buyer, I can deliver it to your door. Save your money from shipping. Contact me before Friday, and I will need to see some money. I can't carry them to socal and back to norcal, because I actually need ALL the room in the car to carry stuff back to norcal. So no mind-changing at the last minute.

09-30-2004, 09:26 AM	#13
toledo240 Zilvia Member Join Date: Apr 2004 Location: toledo Age: 24 Posts: 279 Trader Rating: (0)	nice unique wheels rear needs camber adjustment? front? and what i really want to know is how did you do that to your headlights?

09-30-2004, 12:16 PM	#14
philbro Leaky Injector Join Date: Dec 2003 Location: nj Posts: 81 Trader Rating: (0)	interested in a trade for some money and a set of rare volk meshies? let me know. pbrowne81@hotmail.com

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/wheels-tires/62921-17x8-17x9-impul-c1-dual-4-5-lugs-pattern.html
Posted By	For	Type	Date	Hits
• View topic - Jetta pics	This thread	Refback	03-27-2009 02:32 PM	1
FS: Impul C1 wheels in 17x8 and 17x9 dual 4/5 lug - UtahNissans.com ::	This thread	Refback	02-17-2009 09:32 PM	2
• View topic - Jetta pics	This thread	Refback	01-24-2009 01:31 PM	7
• View topic - Jetta pics	This thread	Refback	12-14-2008 11:22 AM	1
• View topic - Jetta pics	This thread	Refback	12-12-2008 03:32 AM	1
FS: Impul Silhouette C1 wheels in 17x8 +36 and 17x9 +36 dual lug 4/5x114.3 - FreshAlloy.com Forums	This thread	Refback	09-19-2008 10:52 PM	1
FS: Impul C1 wheels in 17x8 and 17x9 dual 4/5 lug - UtahNissans.com ::	This thread	Refback	09-19-2008 10:08 PM	2