Q45 diff install problem?????? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Rubenonamission · 10-07-2009, 01:11 AM

i just installed a 1994 Q45 diff in my S14 along with the Q45 rear hubs and driver side axle (installed on my passenger side) so far so good until i tried to install the z32 tt driver side axle in my car?? this thing is too long!

It measures about 23 1/4 inches compressed from diff end to the end of splines. i measured the clearance between the end of the diff bolt part, to the end of hubs and it measures only 22 inches.

what axle am i suppose to use if i cant use the z32tt driver side axle?? any suggestions are helpful?

*bardabe* · 10-07-2009, 01:33 AM

i thought you where supposed to use the Passenger side axle.

Rocket45 · 10-07-2009, 01:36 AM

http://forums.freshalloy.com/showthread.php?t=172393

Parts list on there install suggest the driver 300TT shaft and Q45 shaft, BUT, what year or type of diff do the shafts come from specifically?

10-07-2009, 01:11 AM	#1
Rubenonamission Leaky Injector Join Date: Aug 2007 Location: merced Posts: 50 Trader Rating: (0)	Q45 diff install problem?????? i just installed a 1994 Q45 diff in my S14 along with the Q45 rear hubs and driver side axle (installed on my passenger side) so far so good until i tried to install the z32 tt driver side axle in my car?? this thing is too long! It measures about 23 1/4 inches compressed from diff end to the end of splines. i measured the clearance between the end of the diff bolt part, to the end of hubs and it measures only 22 inches. what axle am i suppose to use if i cant use the z32tt driver side axle?? any suggestions are helpful?

10-07-2009, 01:33 AM	#2
bardabe Performance Development Join Date: Aug 2005 Location: SoCali 951 Age: 20 Posts: 3,177 Trader Rating: (1) Rides Gallery: bardabe	i thought you where supposed to use the Passenger side axle. __________________ BARDABE PERFORMANCE DEVELOPMENT Custom Fabrication, Wiring Services, and Parts Development Welded Diferentials, Lifetime Warranty no questions asked Review Thread

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-07-2009, 01:36 AM	#3
Rocket45 Join Date: Jul 2009 Location: The Fort Posts: 11 Trader Rating: (0)	http://forums.freshalloy.com/showthread.php?t=172393 Parts list on there install suggest the driver 300TT shaft and Q45 shaft, BUT, what year or type of diff do the shafts come from specifically?

Sponsored Links