| |
| |||||||
| Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
 |
| | LinkBack | Thread Tools | Display Modes |
09-05-2009, 05:41 PM
| #1 |
| Leaky Injector | Help clutch pedal no pressure. Just recently was driving all the pressure just dissappeared from the clutch pedal and just a little bit left on the bottom of the pedal. Stopped at the gas station master cylinder was empty. So the clutch was almost to the floor but still worked. Next morning checked for the leaks- nowhere, filled up master cylinder tryed bleeding the clutch no result. What do you think? Do I just need a new slave n master |
|  |
| Sponsored Links | |
| | |
|
09-05-2009, 05:43 PM
| #2 |
| Zilvia Addict   Join Date: Jan 2008 Location: Amerika24 alabama: Where if your not first..... your last
Posts: 951
Trader Rating: (10) | Replace slave and master. The clutch slave is bolted to the trans and the clutch master cylinder is on the firewall. Whenever one goes out the other is prob about to go out too so just replace or rebuild both. Good luck
__________________  むねが、だいすきだ |
|
| |
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
| |
Linear Mode
