sr oil pick up/striner question. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

monkeyslide17 · 08-21-2009, 12:57 PM

Ok you guys I have looked through some of these post and things, cant find any thing. So here we go, I'm going to be up grading to a Moroso oil pan, not trying togo the cheap way out, but I all so want to go ahead and do the oil pick/strainer. S14 part number 15050-65F01, Is there a cross over to a usdm? SR20de on this part? Or if u can just point me in the right direction. Thanks you guy.

McCoy · 08-21-2009, 02:24 PM

Several places sell it online. Cheapest place I could find, and where I purchased from, was thenismoshop.com. $19.95 for the S14 oil strainer.

*garagelu* · 08-21-2009, 04:50 PM

ebay sells them too. Make sure you buy the s14 pickup gasket. On s13 pickup, they use a o-ring.

*wangan_cruiser* · 08-22-2009, 05:39 PM

sorry to thread jack but how s13 strainer and s14 strainer be different/>

om3ga · 08-22-2009, 06:59 PM

theres a thread/writeup about putting an S14 oil pickup on an S13 SR20DET, Its got a larger opening and a better way of being supported internally. Ill try to find the write up, And also that gasket replaces the O ring on even the s13 SR its better than the O-ring type stock gasket.

SxMachine · 11-15-2009, 08:15 AM

Heres the writeup on the s14 oil pickup over the s13 pickup.
How To: SR20DET Oil strainer/pickup tube replacement/update.: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub

08-21-2009, 12:57 PM	#1
monkeyslide17 Leaky Injector Join Date: Sep 2006 Location: atlanta Age: 29 Posts: 109 Trader Rating: (0)	sr oil pick up/striner question. Ok you guys I have looked through some of these post and things, cant find any thing. So here we go, I'm going to be up grading to a Moroso oil pan, not trying togo the cheap way out, but I all so want to go ahead and do the oil pick/strainer. S14 part number 15050-65F01, Is there a cross over to a usdm? SR20de on this part? Or if u can just point me in the right direction. Thanks you guy. __________________

11-15-2009, 08:15 AM	#6
SxMachine Leaky Injector Join Date: Sep 2002 Location: Jerzie2Atl, Ga Age: 34 Posts: 136 Trader Rating: (0)	Heres the writeup on the s14 oil pickup over the s13 pickup. How To: SR20DET Oil strainer/pickup tube replacement/update.: 240SX Forum / 180SX Forum / Silvia Forum: Nissan Forums / Infiniti Forums - NICOclub __________________ 1990 Nissan 240sx 1972 Datsun 510 I only use the brakes so i can accelerate all over again. Download:Rb, 1jz, Subaru dyno and illegal jdm/edm street runs. Here: http://www.exvitermini.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

08-21-2009, 02:24 PM	#2
McCoy Zilvia Member Join Date: Jan 2007 Location: WA Age: 33 Posts: 260 Trader Rating: (4)	Several places sell it online. Cheapest place I could find, and where I purchased from, was thenismoshop.com. $19.95 for the S14 oil strainer.

08-21-2009, 04:50 PM	#3
garagelu Premium Member Join Date: Aug 2005 Location: Birmingham, AL Age: 24 Posts: 1,100 Trader Rating: (23)	ebay sells them too. Make sure you buy the s14 pickup gasket. On s13 pickup, they use a o-ring.

08-22-2009, 05:39 PM	#4
wangan_cruiser Premium Member Join Date: Apr 2006 Location: SKYLINE BLVD, BAY AREA, CALIFORNIA Age: 25 Posts: 1,794 Trader Rating: (13)	sorry to thread jack but how s13 strainer and s14 strainer be different/>

08-22-2009, 06:59 PM	#5
om3ga Zilvia Junkie Join Date: Jan 2007 Location: Up and Down! California Posts: 486 Trader Rating: (2)	theres a thread/writeup about putting an S14 oil pickup on an S13 SR20DET, Its got a larger opening and a better way of being supported internally. Ill try to find the write up, And also that gasket replaces the O ring on even the s13 SR its better than the O-ring type stock gasket.

Sponsored Links