Supercharged KA build! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

SleepySR · 08-16-2009, 01:13 PM

Some friends and I have been working on this since fall of 08

M62 (frontier/xterra)
370's
q45 tb
q45 maf
walboro 255
ebay header
3" straight pipe w/aspec blastpipes
no cat
NisTune

Our own designed cnc billet mounting hardware

The red run is @5 psi, the blue is @10psi

juicyjay · 08-16-2009, 01:29 PM

wow please post vids!!!!

Sileighty_85 · 08-16-2009, 01:29 PM

Thats Bad Ass hows the driveability?

SleepySR · 08-16-2009, 01:37 PM

The throttle response is lightning fast , it honestly drives like stock but with a lot more power . 1st,2nd,and half way 3rd thru is useless. I do a lot of drift events and the torque is perfect anywhere in the rev range a blip of the throttle will induce oversteer.

Prok0 · 08-16-2009, 02:19 PM

looks sweet, but i bet gettin to that oil filter is gunna be a pain in the dick now. haha

anyways, cool build.

singlecamslam · 08-16-2009, 02:37 PM

hmm, is this setup smogable?

Shift_Dr1ft · 08-16-2009, 02:57 PM

I second that ^^^^^^ if it is smogable build me a kit and I will buy!!!!

Nikeboy355 · 08-16-2009, 03:34 PM

Great graph and looks like very well done engineering... I'm impressed...

But the 5 psi graph seems a little low on power... I made 157WHP 157WTQ with a stock KA... I'm guessing the cams might be the limiting factor...

Was that KA rebuilt or what was the mileage on it?...

*ManoNegra* · 08-16-2009, 03:39 PM

what blower is that btw? looks pretty sweet

drifter_for_life06 · 08-16-2009, 03:59 PM

thats pretty sick....vids please

*!Zar!* · 08-16-2009, 04:03 PM

Quote:

Originally Posted by singlecamslam

hmm, is this setup smogable?

No it's not carb legal.

No, it's not smoggable any differently than a car with an SR or a turbo ka setup.

blackrms13 · 08-16-2009, 06:16 PM

Quote:

Originally Posted by Nikeboy355

Was that KA rebuilt or what was the mileage on it?...

+1 on that information

SleepySR · 08-16-2009, 08:18 PM

Engine has 190,000 on it , last weekend I started to serious blow by, so a new short block is in order along with a mildly ported head , and degree'd S13 cams.

smogable? I don't know where i live 95 and older is saftey inspection only

SleepySR · 08-16-2009, 08:19 PM

Quote:

Originally Posted by Prok0

looks sweet, but i bet gettin to that oil filter is gunna be a pain in the dick now. haha

anyways, cool build.

I installed a Oil filter relocation kit so no trouble there

SleepySR · 08-16-2009, 08:20 PM

blower is from a frontier/xterra

Mangudai · 08-16-2009, 09:27 PM

I love reading stuff like this. Video please..

*murda-c* · 08-16-2009, 09:30 PM

I want to buy that.

KrazyS13 · 08-16-2009, 09:32 PM

I'd love to see a video as well!

southerncross · 08-16-2009, 09:34 PM

ive been wondering if anyone was going to do that. . . i used to hang out at unstable hybrids back in the day and jason was working on a supercharger off a 3.8L pontiac motor, but i dont think he ever got it running.

awesome idea man, glad somebody tackled it. i'd take that over a turbo any day of the week.

xplicit240 · 08-16-2009, 09:55 PM

are you guys planning to make this? id be pretty interested.

BlueKpS13 · 08-16-2009, 10:17 PM

cost? just wondering, ive gone over it a couple times in my head and i though it would seem expensive but i have never been completely sure

SleepySR · 08-17-2009, 06:15 PM

As far as producing these we"ll see.

At this time we're still in the prototype stage. During this first run of CNC parts were trying to finalize the design as bullet proof as possible while keeping it cost effective . Due to the intricate detail in the CNC file, the cost of the CNC running time can be rather costly. With that being said, were trying to find a more cost competitive shop because CNC time for these parts are costly, because more time in the machine = more money. When, and if, the product is finished we will then determine if it'll be cost effective enough to try producing the parts in limited quantities.

Sorry this is not the answer you probably wanted but if i quoted you a price now I'd be lying to you and myself. Right now there is just too many variables that are unknown and nothing is solid yet . We don't have finalized machining times and material prices based on volume. Pricing TBA when we know all the details. Feel free to check back in 2-3 weeks and hopefully well have more info on the details.

mcdonis · 08-17-2009, 08:55 PM

thats awesome!!!!

*Shadowhunter* · 08-17-2009, 09:02 PM

Awesome, finally something unique.Not bad power made too. We need vids for sure.

*D.Bo* · 08-17-2009, 09:03 PM

wow thats really badass!

SleepySR · 08-17-2009, 10:03 PM

Fresh engine is off at the machine shop in the morning , new coated pistons and bearings , degree'd cams and a mildy ported head are in the works.

I also have a H20/meth injection setup going on along with a high / low boost controller switched inside the car.

should get me close to 300whp!

*murda-c* · 08-17-2009, 10:21 PM

How much would i have to pay for the custom stuff? haha

Devil Man · 08-17-2009, 11:12 PM

wow man looks good.. keep us posted.

pahaf · 08-18-2009, 01:19 AM

wow thats a first time i actually see a supercharged KA24DE

pahaf · 08-18-2009, 01:20 AM

Quote:

Originally Posted by Nikeboy355

Great graph and looks like very well done engineering... I'm impressed...

But the 5 psi graph seems a little low on power... I made 157WHP 157WTQ with a stock KA... I'm guessing the cams might be the limiting factor...

Was that KA rebuilt or what was the mileage on it?...

how did u get those numbers? cause all i see is that stock KA's get something like high 120's and low 130's

08-16-2009, 01:13 PM	#1
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	Supercharged KA build! Some friends and I have been working on this since fall of 08 M62 (frontier/xterra) 370's q45 tb q45 maf walboro 255 ebay header 3" straight pipe w/aspec blastpipes no cat NisTune Our own designed cnc billet mounting hardware The red run is @5 psi, the blue is @10psi __________________

08-16-2009, 01:29 PM	#3
Sileighty_85 Nissanaholic! Join Date: Dec 2006 Location: Wishing Back in Okinawa -_- Posts: 2,324 Trader Rating: (0)	Thats Bad Ass hows the driveability? __________________ 後輪駆動車１番 1991 Built SR GT2871R -363whp 1998 S14 W/RB25- Rebuild in Progress

08-16-2009, 01:37 PM	#4
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	The throttle response is lightning fast , it honestly drives like stock but with a lot more power . 1st,2nd,and half way 3rd thru is useless. I do a lot of drift events and the torque is perfect anywhere in the rev range a blip of the throttle will induce oversteer. __________________

08-16-2009, 02:37 PM	#6
singlecamslam Zilvia FREAK! Join Date: Apr 2008 Location: Norcal Posts: 1,092 Trader Rating: (5)	hmm, is this setup smogable? __________________ WTB s13 side skirts.

08-16-2009, 03:34 PM	#8
Nikeboy355 Zilvia Addict Join Date: Mar 2004 Location: Los Angeles, CA Age: 30 Posts: 663 Trader Rating: (0)	Great graph and looks like very well done engineering... I'm impressed... But the 5 psi graph seems a little low on power... I made 157WHP 157WTQ with a stock KA... I'm guessing the cams might be the limiting factor... Was that KA rebuilt or what was the mileage on it?... __________________ NitinJwasHere.Blogspot.com

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

08-16-2009, 01:29 PM	#2
juicyjay Leaky Injector Join Date: Nov 2005 Location: Flordia Posts: 72 Trader Rating: (0)	wow please post vids!!!!

08-16-2009, 02:19 PM	#5
Prok0 Zilvia Member Join Date: Apr 2003 Location: usa Age: 22 Posts: 215 Trader Rating: (0)	looks sweet, but i bet gettin to that oil filter is gunna be a pain in the dick now. haha anyways, cool build.

08-16-2009, 02:57 PM	#7
Shift_Dr1ft Zilvia Member Join Date: Dec 2007 Location: SoCali Age: 22 Posts: 178 Trader Rating: (5)	I second that ^^^^^^ if it is smogable build me a kit and I will buy!!!!

08-16-2009, 03:39 PM	#9
ManoNegra Premium Member Join Date: Jan 2004 Location: SoCali Posts: 4,712 Trader Rating: (27)	what blower is that btw? looks pretty sweet __________________ S-Chassis/Z32 Rear Upright Spherical Bearing Group Buy

08-16-2009, 03:59 PM	#10
drifter_for_life06 Zilvia Junkie Join Date: Sep 2005 Location: Stewartstown, PA Age: 21 Posts: 450 Trader Rating: (2)	thats pretty sick....vids please __________________ 1992 RPS13 AEM Filter GP Sports EXAS Spec D RS*R Downpipe PILOT F/R Strut Bars Shift_sideways

08-16-2009, 08:18 PM	#13
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	Engine has 190,000 on it , last weekend I started to serious blow by, so a new short block is in order along with a mildly ported head , and degree'd S13 cams. smogable? I don't know where i live 95 and older is saftey inspection only __________________

08-16-2009, 08:20 PM	#15
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	blower is from a frontier/xterra __________________

08-16-2009, 09:27 PM	#16
Mangudai Zilvia Junkie Join Date: Jan 2007 Location: South Posts: 527 Trader Rating: (0)	I love reading stuff like this. Video please.. __________________ Almost there.

08-16-2009, 09:30 PM	#17
murda-c Has a Premium Member. Join Date: Jan 2007 Location: deep inside...MoCo, MD Age: 21 Posts: 2,444 Trader Rating: (0)	I want to buy that. __________________

08-16-2009, 09:32 PM	#18
KrazyS13 Leaky Injector Join Date: Aug 2009 Location: Murfreesboro, Tn Age: 25 Posts: 105 Trader Rating: (4)	I'd love to see a video as well!

08-16-2009, 09:34 PM	#19
southerncross Leaky Injector Join Date: Oct 2008 Location: georgia Age: 27 Posts: 66 Trader Rating: (0)	ive been wondering if anyone was going to do that. . . i used to hang out at unstable hybrids back in the day and jason was working on a supercharger off a 3.8L pontiac motor, but i dont think he ever got it running. awesome idea man, glad somebody tackled it. i'd take that over a turbo any day of the week.

08-16-2009, 09:55 PM	#20
xplicit240 Zilvia Addict Join Date: Oct 2005 Location: Weird NJ! Age: 25 Posts: 710 Trader Rating: (0)	are you guys planning to make this? id be pretty interested. __________________

08-16-2009, 10:17 PM	#21
BlueKpS13 Zilvia Member Join Date: Dec 2007 Location: Wa Age: 19 Posts: 155 Trader Rating: (0)	cost? just wondering, ive gone over it a couple times in my head and i though it would seem expensive but i have never been completely sure

08-17-2009, 06:15 PM	#22
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	As far as producing these we"ll see. At this time we're still in the prototype stage. During this first run of CNC parts were trying to finalize the design as bullet proof as possible while keeping it cost effective . Due to the intricate detail in the CNC file, the cost of the CNC running time can be rather costly. With that being said, were trying to find a more cost competitive shop because CNC time for these parts are costly, because more time in the machine = more money. When, and if, the product is finished we will then determine if it'll be cost effective enough to try producing the parts in limited quantities. Sorry this is not the answer you probably wanted but if i quoted you a price now I'd be lying to you and myself. Right now there is just too many variables that are unknown and nothing is solid yet . We don't have finalized machining times and material prices based on volume. Pricing TBA when we know all the details. Feel free to check back in 2-3 weeks and hopefully well have more info on the details. __________________

08-17-2009, 08:55 PM	#23
mcdonis Join Date: Aug 2008 Location: queens Posts: 7 Trader Rating: (0)	thats awesome!!!! __________________

08-17-2009, 09:02 PM	#24
Shadowhunter Premium Member Join Date: Aug 2008 Location: San Diego,CA Age: 25 Posts: 204 Trader Rating: (0)	Awesome, finally something unique.Not bad power made too. We need vids for sure.

08-17-2009, 09:03 PM	#25
D.Bo Premium Member Join Date: Mar 2007 Location: New Orlenas Age: 21 Posts: 170 Trader Rating: (0)	wow thats really badass!

08-17-2009, 10:03 PM	#26
SleepySR Leaky Injector Join Date: Aug 2003 Location: @ Petty Enterprise Age: 29 Posts: 138 Trader Rating: (0)	Fresh engine is off at the machine shop in the morning , new coated pistons and bearings , degree'd cams and a mildy ported head are in the works. I also have a H20/meth injection setup going on along with a high / low boost controller switched inside the car. should get me close to 300whp! __________________

08-17-2009, 10:21 PM	#27
murda-c Has a Premium Member. Join Date: Jan 2007 Location: deep inside...MoCo, MD Age: 21 Posts: 2,444 Trader Rating: (0)	How much would i have to pay for the custom stuff? haha __________________

08-18-2009, 01:19 AM	#29
pahaf Leaky Injector Join Date: Aug 2009 Location: Sacramento Age: 18 Posts: 53 Trader Rating: (0)	wow thats a first time i actually see a supercharged KA24DE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/tech-talk/273076-supercharged-ka-build.html
Posted By	For	Type	Date	Hits
KCDA-Online • View topic - supercharging a 240... what do you think about my design...	This thread	Refback	09-01-2009 09:29 PM	1
KCDA-Online • View topic - requirements of a d1 drift car...	This thread	Refback	09-01-2009 09:32 AM	14
KCDA-Online • View topic - supercharging a 240... what do you think about my design...	This thread	Refback	08-26-2009 10:26 PM	5
High Compression KA - Page 2 - SDREV - Driving San Diego	This thread	Refback	08-24-2009 10:25 PM	6
KA24E: KA engines - 240SX Forums	This thread	Pingback	08-21-2009 10:56 PM	3
510 Boso Wagon - Supercharged KA24DE - Page 10 - Ratsun Forum	This thread	Refback	08-19-2009 10:12 PM	7