makugx

heya

I bought this with the whole setup.

I need to set it up to 7500 and I wanted to know if anyone has done this before.

following the manual instructions should be alright?
is there any tips or things I should know before playing with it?
cuz i dont want to brake it you know.

http://www.turbo-garage.com.ua/garag...xi/PowerFC.pdf

thank you very much for your help.

fliprayzin240sx

Umm...why would you need it to rev to 7500? Are you setup for it? Last thing you want is have a rocker arm ping off the head...besides, thats the least of what you need to do with a new PFC. GET IT TUNED FIRST!!!




PS: Manual says page 33 for Rev Setting...

__________________

makugx

its tuned by import intelligence.

I need to rev before 8k because I dont want to stress the engine as much.

im setup for 8k, but i wanna give it a brake.
i have all kinds of internal upgrades. except on the bottom.

and nothing is new, its all pretty used...not by me thou.

garagelu

its pretty self explanatory if you just scroll through the menus with the commander.

Just go to the main start menu
go to settings
click over to rev/idle
the rev limit will be the first setting
click the right arrow to go over to the rev limit number
then just click up or down depending on where you want to set it

slider2828

RTFM????

I bet you didn't even search this forum right? As there is a Tips/Tricks guide for the PowerFC.....

Search....

__________________
Turn and Burn!

JVD

WTF.

Have you ever even looked at your commander? If you took like 2 mins to go through the menus you would find it.

PFC is super simple.

makugx

yeah I have, and I know where it is.
I also have the manual.
im just making sure that if i change it
its gonna be alright and theres nothing that im missing out.
its called BEING CAUTIOUS.

cuz i dunno if any of you did something and then someone said...
OMG DID YOU FORGET TO CHECK THE (something something) ..
and you go
WHATS THAT?
and he goes
OMG YOU BROKE IT!
and you go
*shoots self

ok?
smart asses :P

PS: I'm a newbie, respect me! :P

rc1honda

Im pretty sure its already set to 7,500 RPMS. Well mine was even after I initialized it. So my guess is yours is already st there unless the tuner changed it. which i don;t see why 7,500 Rpms is plenty high.

makugx

yeah, you'd think so, but for some reason it goes allllll the way to 8,000rpms.
it makes it sound like its gonna fall appart..so loud and so vibrating.
the power fc shows the knock bar almost 1 cm big. (yes, I know what this means)

anyway, i gotta set it to 7500 because i have a t30 and it only KICKS from 5.500 rpms till 8,000 rpms and since it stresses the engine so much i wanna cut back a lil bit.