Does the DET have a rev limiter/speed governor? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

S14Pilot · 12-21-2001, 03:30 PM

Just for future reference, does anyone know if the SR20DET from the S14 have a speed limiter/governor like the KA?  When I finally find a 240, I'll be doing the swap.  Thanks!

*ca18guy* · 12-21-2001, 03:42 PM

#Moderation Mode

<a href="http://www.zilvia.net/forums/cgi-bin/topic.cgi?forum=2&topic=1263" target="_self">Moved here</a>

kitoro · 12-21-2001, 05:26 PM

i asked the question about the limiter.. no one knows. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>
or no one replied?
lah...

i know it redlines at 7500
as for the limiter.. i really would like to know where that is too! ^.^

tristarx · 12-21-2001, 06:07 PM

The stock ECU has rev and speed limiter.  It's just not that common that most of us experience it.  The stock S13 SR20DET can pull comfortably to 7500rpm no problem, and we didn't find any reason yet to pull beyond that so far...

Tx.

Wayne
<a href="http://www.phase2motortrend.com

" target="_blank">http://www.phase2motortrend.com

</a>

kitoro · 12-21-2001, 11:38 PM

but if a person were to go beyond 7500... and would like to know where the rev limiter is so they don't screw up the engine..... at what rpm would the limiter be?

Non fujiita had an aftermarket (is there an acronym for this word??) tach installed for his motor... and if he uses it like it's supposed to be used, he wouldn't rev it beyond a certain value.. it'd be great to know what the limit is tho. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

tristarx · 12-22-2001, 03:46 AM

The S13 SR20DET redline begins at 7500rpm.  After that is the tach "red zone".  We assume that's when the rev limiter will kick in.  We'll double check with the FSM and advise shortly.

Tx.

Wayne
http://www.phase2motortrend.com

mistert · 12-22-2001, 08:55 AM

#### i see that phase2 is selling those new blitz coilovers from sachs...is blitz not using Rs*R parts any more for suspension components, or are they going to have separate lines of suspension parts?

tristarx · 12-23-2001, 04:40 AM

The Blitz Coil Overs will be completely handle by SACH Racing.  People that knows SACH will know that they involve in Formula 1 races and does not make any suspension components for anybody for street use.  We were surprised to be contacted by Blitz and took a tour of their sample suspension pieces (that's how we got the pictures).

Prices has not yet been determined, but we have been told it's not for the timid for the race version.  The street version will be more economical.

Tx.

dkf200 · 12-23-2001, 02:44 PM

I have a s14 200sx (Aust) - My Rev limiter cuts in at the redline mark not above. This could be just an Australian thing though as we often get detuned engines.

12-21-2001, 06:07 PM	#4
tristarx Leaky Injector Join Date: Nov 2001 Posts: 140 Trader Rating: (0)	The stock ECU has rev and speed limiter.  It's just not that common that most of us experience it.  The stock S13 SR20DET can pull comfortably to 7500rpm no problem, and we didn't find any reason yet to pull beyond that so far... Tx. Wayne <a href="http://www.phase2motortrend.com " target="_blank">http://www.phase2motortrend.com </a> __________________ Wayne[br]http://www.phase2motortrend.com

12-23-2001, 02:44 PM	#9
dkf200 Join Date: Nov 2001 Posts: 1 Trader Rating: (0)	I have a s14 200sx (Aust) - My Rev limiter cuts in at the redline mark not above. This could be just an Australian thing though as we often get detuned engines. __________________ There's no risk involved ...if you're good.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-21-2001, 03:30 PM	#1
S14Pilot Leaky Injector Join Date: Nov 2001 Posts: 122 Trader Rating: (0)	Just for future reference, does anyone know if the SR20DET from the S14 have a speed limiter/governor like the KA?  When I finally find a 240, I'll be doing the swap.  Thanks!

12-21-2001, 03:42 PM	#2
ca18guy Premium Member Join Date: Jul 2001 Location: Clearwater FL Age: 27 Posts: 3,227 Trader Rating: (0) Rides Gallery: ca18guy	#Moderation Mode <a href="http://www.zilvia.net/forums/cgi-bin/topic.cgi?forum=2&topic=1263" target="_self">Moved here</a>

12-21-2001, 05:26 PM	#3
kitoro Zilvia Member Join Date: Jul 2001 Posts: 275 Trader Rating: (0)	i asked the question about the limiter.. no one knows. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'> or no one replied? lah... i know it redlines at 7500 as for the limiter.. i really would like to know where that is too! ^.^

12-21-2001, 11:38 PM	#5
kitoro Zilvia Member Join Date: Jul 2001 Posts: 275 Trader Rating: (0)	but if a person were to go beyond 7500... and would like to know where the rev limiter is so they don't screw up the engine..... at what rpm would the limiter be? Non fujiita had an aftermarket (is there an acronym for this word??) tach installed for his motor... and if he uses it like it's supposed to be used, he wouldn't rev it beyond a certain value.. it'd be great to know what the limit is tho. <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/tounge.gif" border="0" valign="absmiddle" alt=':p'>

12-22-2001, 03:46 AM	#6
tristarx Leaky Injector Join Date: Nov 2001 Posts: 140 Trader Rating: (0)	The S13 SR20DET redline begins at 7500rpm.  After that is the tach "red zone".  We assume that's when the rev limiter will kick in.  We'll double check with the FSM and advise shortly. Tx. Wayne http://www.phase2motortrend.com

12-22-2001, 08:55 AM	#7
mistert Pearl White Mike Join Date: Oct 2001 Location: memphis TN Posts: 894 Trader Rating: (0)	#### i see that phase2 is selling those new blitz coilovers from sachs...is blitz not using Rs*R parts any more for suspension components, or are they going to have separate lines of suspension parts?

12-23-2001, 04:40 AM	#8
tristarx Leaky Injector Join Date: Nov 2001 Posts: 140 Trader Rating: (0)	The Blitz Coil Overs will be completely handle by SACH Racing.  People that knows SACH will know that they involve in Formula 1 races and does not make any suspension components for anybody for street use.  We were surprised to be contacted by Blitz and took a tour of their sample suspension pieces (that's how we got the pictures). Prices has not yet been determined, but we have been told it's not for the timid for the race version.  The street version will be more economical. Tx.

Sponsored Links