Offset 101 For Dummies - Page 4 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*713kouki* · 01-14-2009, 01:18 PM

Quote:

Originally Posted by beeracing s14

if there is someone who still cant understand this simple examples... ill hit him in the head.

i'm sorry i'm still a baby , all i know is that i'm gonna get super advan's 18X9 FRONT 18X10 REAR for my 98 240

if anyone can tell me the exact offsets i need to make them look flush i'll give them a dollar , i have z32 brakes if that matters

*713kouki* · 01-14-2009, 03:33 PM

btw my rears are already rolled , and not looking to get overfenders unless needed . thanks for anyhelp

ryangreg · 02-03-2009, 12:47 AM

+87 ooutback with a -44 up front with some 33mm spacers all around.

handinpants · 02-18-2009, 03:23 AM

I have some 17x9 for the front and some 17x9.5 for the rear, the wheels are +12 offset. I am wondering what size rubber to put on there, it is going on an s13 with coilovers, not lowered too much, and i honestly am not good with avoiding the curbage, so i want to stay away from the stretched look, any suggestions, will there be clearance issues?

*Otto347* · 02-18-2009, 09:55 AM

Quote:

Originally Posted by ryangreg

+87 ooutback with a -44 up front with some 33mm spacers all around.

right-O

*SoSideways* · 02-18-2009, 10:03 AM

Quote:

Originally Posted by handinpants

I have some 17x9 for the front and some 17x9.5 for the rear, the wheels are +12 offset. I am wondering what size rubber to put on there, it is going on an s13 with coilovers, not lowered too much, and i honestly am not good with avoiding the curbage, so i want to stay away from the stretched look, any suggestions, will there be clearance issues?

Until you get into the negative offsets, or single digit offset up front with a 9.5, you're good to go.

Even then, most that you would have to do is either to hammer the fender well, or to pull the front fenders a little bit.

pornosquadz · 07-14-2009, 02:55 AM

just out of couriosity who knows if the nismo lmgt1 make any of there offset zero or negative??? kuz my lmgt1 are 18x9.5 offset +14(all 4 rims). any suggestions on what size tires and brand should i get???

pornosquadz · 07-19-2009, 04:07 PM

^^^^^^^^^^^^^ anyone with the answer and the help????

nissans13 · 10-03-2009, 09:42 PM

So, will a 17x13 -26 front 17x14 -36 rear fix under a s13, with 20mm front and 50mm overfenders?

nathanong87 · 10-04-2009, 08:15 AM

Quote:

Originally Posted by nissans13

So, will a 17x13 -26 front 17x14 -36 rear fix under a s13, with 20mm front and 50mm overfenders?

ur kidding right.....

i bet you most people would have a TOUGH time fitting 17x13-26 in the rear with bulging 50mm overs....

to put it in persective. i run a 17x9.5 +12 in the front of my s14.... a 17x13 -26 will effective stick out 81mm more.... and dont forget that one needs to turn the wheel for steering..... tubbed fenders would be least of your worries.

Quote:

Originally Posted by pornosquadz

just out of couriosity who knows if the nismo lmgt1 make any of there offset zero or negative??? kuz my lmgt1 are 18x9.5 offset +14(all 4 rims). any suggestions on what size tires and brand should i get???

to my knowledge they do not come in negative or zero offsets. 18x9.5 in the rear should be pretty simple to fit in the front and rear. roll your fenders and hammer the high spots of your wells.

nissans13 · 10-04-2009, 09:57 PM

I would like to get a straight answer, not some asshole trying to a bad ass. If you can't answer someone's question with out being a dick. SHUT THE FUCK UP!!!!!!!!

*s13 @ fullboost* · 10-04-2009, 10:06 PM

answer is no ?

ARMORY · 10-14-2009, 07:12 AM

Yo! trying to go 5 lug deep and cheap for my s13 thinking about going with china mustang copy's 17x10 +20 all around anybody know if they will clear the coils in the front???

pretty sure rear should be good just iffy on the front looked through this post found it very helpful just need expert input before i buy

thanks sorry for the newbie questions

*rakooda* · 10-14-2009, 09:30 AM

Quote:

Originally Posted by nissans13

I would like to get a straight answer, not some asshole trying to a bad ass. If you can't answer someone's question with out being a dick. SHUT THE FUCK UP!!!!!!!!

Someone on this forum once said "dont ask a stupid question if you dont want a stupid answer" I'm not saying your question is stupid, but why in the hell do you want to run a 17 x 13 in the front in the first place? Trying to be gangSTAR or what? because performance-wise, that makes absolutely 0 sense. So to you answer your questions.. NO, thats just not smart.

Quote:

Yo! trying to go 5 lug deep and cheap for my s13 thinking about going with china mustang copy's 17x10 +20 all around anybody know if they will clear the coils in the front???

I dont know the 13 chassis all that well at all. I've heard of peoples running 10 wide up front, but I'm not exactly sure what the fine details were, theres a gang of info in the "fitment whore" thread you just gotta find it, lol. or search Zilvia. I would think you can do it, maybe with a minor pull? But like I said, thats a pure assumption hahah.

EndLeSS8 · 10-20-2009, 01:42 AM

Do I need extended wheel studs to run a 3mm spacer for the S14 front? Is it safe to run a 3mm spacer on stock wheel studs?

How long are stock S14 wheel studs anyways? I know Nismo has 50mm and 60mm ones, and Peak Performance is 60mm

need for drift · 10-20-2009, 08:18 AM

Does anyone know if
18x10+30 front and
18x10 +30 rear with a +30 offset will fit s14 chassis
with a stock fenders and with out spacers
thanks

10-04-2009, 10:06 PM	#102
s13 @ fullboost RedLine SlideWays Join Date: Dec 2007 Location: Moorpark/Thousand Oaks, CA Age: 18 Posts: 1,493 Trader Rating: (1)	answer is no ? __________________ Team RedLine SlideWays www.aigraphix.com/wordpress Just another rough day at the office.

10-14-2009, 07:12 AM	#103
ARMORY Leaky Injector Join Date: Nov 2008 Location: (909) Posts: 76 Trader Rating: (0)	Yo! trying to go 5 lug deep and cheap for my s13 thinking about going with china mustang copy's 17x10 +20 all around anybody know if they will clear the coils in the front??? pretty sure rear should be good just iffy on the front looked through this post found it very helpful just need expert input before i buy thanks sorry for the newbie questions __________________

10-20-2009, 01:42 AM	#105
EndLeSS8 Zilvia Junkie Join Date: Nov 2003 Location: Burnaby, Canada Posts: 428 Trader Rating: (3)	Do I need extended wheel studs to run a 3mm spacer for the S14 front? Is it safe to run a 3mm spacer on stock wheel studs? How long are stock S14 wheel studs anyways? I know Nismo has 50mm and 60mm ones, and Peak Performance is 60mm __________________ 268generation.com -United for His Renown-

10-20-2009, 08:18 AM	#106
need for drift Join Date: Aug 2007 Location: riverside Posts: 39 Trader Rating: (0)	question Does anyone know if 18x10+30 front and 18x10 +30 rear with a +30 offset will fit s14 chassis with a stock fenders and with out spacers thanks Last edited by need for drift; 10-20-2009 at 03:01 PM.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-14-2009, 03:33 PM	#92
713kouki Premium Member Join Date: Jul 2008 Location: n.w. houston Age: 20 Posts: 86 Trader Rating: (1)	btw my rears are already rolled , and not looking to get overfenders unless needed . thanks for anyhelp

02-03-2009, 12:47 AM	#93
ryangreg Zilvia Member Join Date: Feb 2006 Location: exeter Posts: 213 Trader Rating: (0)	+87 ooutback with a -44 up front with some 33mm spacers all around.

02-18-2009, 03:23 AM	#94
handinpants BANNED Join Date: Feb 2008 Location: los Angeles Age: 27 Posts: 1,563 Trader Rating: (26) Rides Gallery: handinpants	I have some 17x9 for the front and some 17x9.5 for the rear, the wheels are +12 offset. I am wondering what size rubber to put on there, it is going on an s13 with coilovers, not lowered too much, and i honestly am not good with avoiding the curbage, so i want to stay away from the stretched look, any suggestions, will there be clearance issues?

07-14-2009, 02:55 AM	#97
pornosquadz Join Date: Jul 2009 Location: Stockton Age: 24 Posts: 22 Trader Rating: (0)	just out of couriosity who knows if the nismo lmgt1 make any of there offset zero or negative??? kuz my lmgt1 are 18x9.5 offset +14(all 4 rims). any suggestions on what size tires and brand should i get???

07-19-2009, 04:07 PM	#98
pornosquadz Join Date: Jul 2009 Location: Stockton Age: 24 Posts: 22 Trader Rating: (0)	^^^^^^^^^^^^^ anyone with the answer and the help????

10-03-2009, 09:42 PM	#99
nissans13 Join Date: Dec 2008 Location: ca Age: 27 Posts: 17 Trader Rating: (1)	So, will a 17x13 -26 front 17x14 -36 rear fix under a s13, with 20mm front and 50mm overfenders?

10-04-2009, 09:57 PM	#101
nissans13 Join Date: Dec 2008 Location: ca Age: 27 Posts: 17 Trader Rating: (1)	I would like to get a straight answer, not some asshole trying to a bad ass. If you can't answer someone's question with out being a dick. SHUT THE FUCK UP!!!!!!!!

LinkBacks (?) LinkBack to this Thread: http://zilvia.net/f/tech-talk/166626-offset-101-dummies.html
Posted By	For	Type	Date	Hits
My stupid offsets question... - Northwest Nissans	This thread	Refback	11-18-2009 10:39 PM	7
Drift Spec Camber? - Page 2 - 240sxONE Forums	This thread	Refback	09-02-2009 03:30 PM	13
Mazda Miatas For Sale, Rent Mazda Miata, Miata Cars - Lightningarrester	This thread	Refback	03-09-2009 06:34 AM	1
Mazda Preowned 6 Wagon Seattle, Mazda Pickups, Mazda Protege 2000 Seat Belt Driver Side Front - Nicorgas	This thread	Refback	03-08-2009 10:00 AM	1
1993 Mazda Protege, 1993 Mazda Miata S, 1993 Mazda Protege Performance - Wheelbuildint	This thread	Refback	03-07-2009 03:51 AM	1
ScionLife View topic - FS: 5x100 or 114.3 Enkei Evo5 17x7 +35 SoCal Pickup 450$	This thread	Refback	02-09-2009 02:15 PM	1
I feel like an idiot for asking this. - ImportsNC Online Forums // Your Source for NC Import Scene	This thread	Pingback	12-01-2008 08:13 PM	1
I have a F**kin newb question!!! - 240Atlanta.com	This thread	Refback	10-18-2008 03:26 AM	1