|05-31-2006, 10:19 AM||#1|
another A/C circuit to efan question
Ok, yes it's another "I'm using the AC circuit on an S14 to power my FALs" thread.
But the problem is, I want it to work just like the stock fan but have it power my FALs instead. I have a S15 SR20DET with no AC pump or triple pressure switch installed. I took them off. I used the connector for the stock fan (4 wires) two of which were black which I soldered to the black wire for the fans and the other two power (high and low) wires off the connector I connected to the power line of the fan.
When I crank over the motor, have the AC button pressed and fan switch on the console switched to 1-4, the FALS don't do shit....they should. Is this because I don't have the pump or triple pressure switch hooked up? I don't want to have to put that stuff back in just to get my fans working. Is there a way, if what I said above is stopping it from working, to bypass the triple pressure switch or somehow close the circuit to make the AC button work to turn on my fans...without AC??