JDM S14 front and Rear brake conversion HELP!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

TomeiS14 · 05-21-2006, 02:22 AM

Hey i was wondering what i would need to use the JDM S14 piston fronts and 2 piston brakes on my S14.....Im currently running project mu pads and rotora slotted rotors....will they work with the JDM brakes or will i have to get new rotors and pads for the setup...any input is great Thanks guys!!

Indolent · 05-21-2006, 03:17 AM

if you're using usdm stock s14 rotors/calipers they won't work, i believe the jdm k's 4 piston calipers are for 30mm rotors, pads are different also, you could use z32 rotors/pads for front/rear

TomeiS14 · 05-21-2006, 07:25 AM

they are the same size as Z32 F/R for both pads and rotors??? Would i also need new brake lines and master cylinder??

projectRDM · 05-21-2006, 07:54 AM

No.

JDM S14 = Z32 front, US S14 rear.

Only the fronts are different, and we've covered this for the past 10 years. Nice effort you made to search.

05-21-2006, 02:22 AM	#1
TomeiS14 Leaky Injector Join Date: Sep 2005 Location: San Gabriel, CA Posts: 136 Trader Rating: (0)	JDM S14 front and Rear brake conversion HELP!! Hey i was wondering what i would need to use the JDM S14 piston fronts and 2 piston brakes on my S14.....Im currently running project mu pads and rotora slotted rotors....will they work with the JDM brakes or will i have to get new rotors and pads for the setup...any input is great Thanks guys!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Sponsored Links
Remove these by purchasing a Premium Membership with Zilvia.net!

05-21-2006, 03:17 AM	#2
Indolent Zilvia FREAK! Join Date: Jun 2005 Location: So. Cal, Riverside Area Posts: 1,089 Trader Rating: (1)	if you're using usdm stock s14 rotors/calipers they won't work, i believe the jdm k's 4 piston calipers are for 30mm rotors, pads are different also, you could use z32 rotors/pads for front/rear

05-21-2006, 07:25 AM	#3
TomeiS14 Leaky Injector Join Date: Sep 2005 Location: San Gabriel, CA Posts: 136 Trader Rating: (0)	they are the same size as Z32 F/R for both pads and rotors??? Would i also need new brake lines and master cylinder??

05-21-2006, 07:54 AM	#4
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 35 Posts: 13,036 Trader Rating: (12)	No. JDM S14 = Z32 front, US S14 rear. Only the fronts are different, and we've covered this for the past 10 years. Nice effort you made to search.