NV S14 Sr20det sale/PartOUT - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Halfamazing · 06-14-2015, 04:46 PM

I'm moving on from the SR on to something different. With that said it is time to sell all I have collected. I recently rebuilt my old motor but was getting some piston slap. The cylinder walls are in decent shape but I would bore it .20 over and throw in some 86.5mm pistons since it is on the larger scope of clearance for 86mm stock pistons.

Shipping and PP fees are not included and buyer is responsible to pay.
Please do not low ball me. I'm all for fair offers , but I really do not need to sell any of this. Sales will fund my next swap. With that said, I am not over a barrel so be cool. Also I do work a full time job , so be patient.

SOLD $300 S14 sr20det block : Was hot tanked / decked/ and honed for reuse of stock pistons. Was used for literally 3 miles and removed and torn down. I recommend having it bored .20 over and using 86.5 mm pistons. This is for a bare block with caps and girdle.

SOLD$160 Sr20det crank shaft used in stock rebuild. All journals in excellent condition.

$100 Stock Pistons and rods

$50 S14 sr20det Tomei MLS head gasket. Used 3 miles

$200 S14 sr20det upper and lower intake manifold and TB. Has been polished. in good condition , comes with TPS, and IACV but its the plastic screw type and its stripped.

SOLDS14 sr20det Valve cover

Valve cover $130

*Taking offers: $2500 Built s14 sr20det. I purchased the short block off a member here a while ago. Bought the head off another member.

Weisco pistons 86.5mm 9:1
Manley rods
acl bearings
arp main and Head studs
tomei MLS
Greddy Oil pan

Head ported and Polished
Supertech dual valve springs and retainers

This motor is getting blowby and needs rings. Still runs though.

$325 Sr20det Manley H beam Rods. Brand new only opened box to look at them.

SOLD : S14 sr water neck, catch can and lines, twinscroll turbo setup, down pipe, turbo intake, greddy oil pan x2, splitfire coils, sanded down s14 sr VC, ACT clutch kit, Power FC, Sard injectors, ARP head studs.

I have more stuff , more like odds and ends such as alternator, fan clutch , stuff like that but I'm not really interested in selling until the large items move.

ep3scott · 06-14-2015, 08:44 PM

PM sent

Cheers,
Scott

S14kouki805 · 06-15-2015, 01:14 PM

earmarking this one

Halfamazing · 06-15-2015, 06:50 PM

Let's sell some shit bump

CaTalyst.X · 06-15-2015, 09:39 PM

I will take the head and throttle cable bracket per our PM's

Thanks

Ryan

Po_31 · 06-16-2015, 01:49 AM

275 for the coil packs

Halfamazing · 06-16-2015, 05:53 AM

Quote:

Originally Posted by Po_31

275 for the coil packs

pmed you sir

RalliartRsX · 06-16-2015, 06:31 AM

Yuummmmm Twin Scroll!

Nice setup for a great price!

Halfamazing · 06-16-2015, 09:18 PM

Bump it up

Halfamazing · 06-17-2015, 06:04 PM

S14 sr20det head sold and shipped out. Thanks

Halfamazing · 06-18-2015, 05:48 PM

Power FC and Injectors sold pending payments

Halfamazing · 06-19-2015, 06:46 PM

Let's get some more shit sold !! Prices OBO

Halfamazing · 06-20-2015, 06:40 PM

Bump ! Added more pictures and a few items! Buy stuffs

bigjamaican · 06-20-2015, 10:39 PM

Interested in the valve cover, how much?

Halfamazing · 06-20-2015, 10:52 PM

Quote:

Originally Posted by bigjamaican

Interested in the valve cover, how much?

Pmed you sir

Z32TwinTurbo · 06-20-2015, 11:04 PM

Have the s14 maf??

Halfamazing · 06-20-2015, 11:05 PM

No sorry. I was using map sensor... de jetro

Po_31 · 06-21-2015, 02:35 AM

by any chance would you split the oil catch can and intake with lines

Halfamazing · 06-21-2015, 07:35 AM

Quote:

Originally Posted by Po_31

by any chance would you split the oil catch can and intake with lines

Yes I will part.

Halfamazing · 06-22-2015, 06:29 PM

Some prices adjusted. Don't be afraid to send reasonable offers the worst I can say is no. OBO

SidewayzAsFck · 06-22-2015, 10:54 PM

shoot me price for catch can and lines please! Interested

Po_31 · 06-23-2015, 05:12 AM

Quote:

Originally Posted by Halfamazing

Yes I will part.

how much for

Halfamazing · 06-23-2015, 06:59 AM

Pms replied. My prices adjustments didnt save for some reason.. will fix later.

hobbs · 06-23-2015, 07:00 AM

Have an extra crank pulley in good shape?

Halfamazing · 06-23-2015, 10:14 AM

Quote:

Originally Posted by hobbs

Have an extra crank pulley in good shape?

I do. Its the one pictured on the shortblock.

Halfamazing · 06-23-2015, 05:01 PM

Lowered some prices and listed some things for part out.

Halfamazing · 06-24-2015, 06:09 PM

Upppppppppp

SidewayzAsFck · 06-25-2015, 02:04 AM

Looking for s14 sr waterneck

Kingtal0n · 06-25-2015, 09:35 AM

If you power FC is for 1998 kouki model sr20det I am interested

Halfamazing · 06-25-2015, 09:52 AM

Quote:

Originally Posted by Kingtal0n

If you power FC is for 1998 kouki model sr20det I am interested

Pfc is spoken for as of right now. I am taking payments trying to help a guy out.

06-14-2015, 04:46 PM	#1
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	S14 Sr20det sale/PartOUT I'm moving on from the SR on to something different. With that said it is time to sell all I have collected. I recently rebuilt my old motor but was getting some piston slap. The cylinder walls are in decent shape but I would bore it .20 over and throw in some 86.5mm pistons since it is on the larger scope of clearance for 86mm stock pistons. Shipping and PP fees are not included and buyer is responsible to pay. Please do not low ball me. I'm all for fair offers , but I really do not need to sell any of this. Sales will fund my next swap. With that said, I am not over a barrel so be cool. Also I do work a full time job , so be patient. SOLD $300 S14 sr20det block : Was hot tanked / decked/ and honed for reuse of stock pistons. Was used for literally 3 miles and removed and torn down. I recommend having it bored .20 over and using 86.5 mm pistons. This is for a bare block with caps and girdle. SOLD$160 Sr20det crank shaft used in stock rebuild. All journals in excellent condition. $100 Stock Pistons and rods $50 S14 sr20det Tomei MLS head gasket. Used 3 miles $200 S14 sr20det upper and lower intake manifold and TB. Has been polished. in good condition , comes with TPS, and IACV but its the plastic screw type and its stripped. SOLDS14 sr20det Valve cover Valve cover $130 Taking offers: $2500 Built s14 sr20det. I purchased the short block off a member here a while ago. Bought the head off another member. Weisco pistons 86.5mm 9:1 Manley rods acl bearings arp main and Head studs tomei MLS Greddy Oil pan Head ported and Polished Supertech dual valve springs and retainers This motor is getting blowby and needs rings. Still runs though. $325 Sr20det Manley H beam Rods. Brand new only opened box to look at them. SOLD : S14 sr water neck, catch can and lines, twinscroll turbo setup, down pipe, turbo intake, greddy oil pan x2, splitfire coils, sanded down s14 sr VC, ACT clutch kit, Power FC, Sard injectors, ARP head studs. I have more stuff , more like odds and ends such as alternator, fan clutch , stuff like that but I'm not really interested in selling until the large items move. __________________ Last edited by Halfamazing; 07-30-2015 at 05:54 PM.. Reason: Clean up sold items*

06-15-2015, 06:50 PM	#4
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Let's sell some shit bump __________________

06-16-2015, 09:18 PM	#9
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Bump it up __________________

06-17-2015, 06:04 PM	#10
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	S14 sr20det head sold and shipped out. Thanks __________________

06-18-2015, 05:48 PM	#11
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Power FC and Injectors sold pending payments __________________

06-14-2015, 08:44 PM	#2
ep3scott Leaky Injector Join Date: Jul 2014 Location: North Carolina Age: 34 Posts: 106 Trader Rating: (2) Feedback Score: 2 reviews	PM sent Cheers, Scott

06-15-2015, 01:14 PM	#3
S14kouki805 Zilvia Addict Join Date: Aug 2014 Location: California Age: 42 Posts: 808 Trader Rating: (5) Feedback Score: 5 reviews	earmarking this one

06-15-2015, 09:39 PM	#5
CaTalyst.X Leaky Injector Join Date: Feb 2014 Location: Oregon Age: 36 Posts: 108 Trader Rating: (5) Feedback Score: 5 reviews	I will take the head and throttle cable bracket per our PM's Thanks Ryan

06-16-2015, 01:49 AM	#6
Po_31 Nissanaholic! Join Date: Jan 2011 Location: houston Posts: 2,476 Trader Rating: (28) Feedback Score: 28 reviews	275 for the coil packs

06-16-2015, 06:31 AM	#8
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,791 Trader Rating: (32) Feedback Score: 32 reviews	Yuummmmm Twin Scroll! Nice setup for a great price!

06-19-2015, 06:46 PM	#12
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Let's get some more shit sold !! Prices OBO __________________

06-20-2015, 06:40 PM	#13
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Bump ! Added more pictures and a few items! Buy stuffs __________________

06-20-2015, 10:39 PM	#14
bigjamaican Join Date: Aug 2011 Location: MIRAMAR Age: 49 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	Interested in the valve cover, how much?

06-20-2015, 11:04 PM	#16
Z32TwinTurbo Zilvia Junkie Join Date: Nov 2013 Location: Sacramento, CA Age: 27 Posts: 526 Trader Rating: (0) Feedback Score: 0 reviews	Have the s14 maf??

06-20-2015, 11:05 PM	#17
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	No sorry. I was using map sensor... de jetro __________________

06-21-2015, 02:35 AM	#18
Po_31 Nissanaholic! Join Date: Jan 2011 Location: houston Posts: 2,476 Trader Rating: (28) Feedback Score: 28 reviews	by any chance would you split the oil catch can and intake with lines

06-22-2015, 06:29 PM	#20
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Some prices adjusted. Don't be afraid to send reasonable offers the worst I can say is no. OBO __________________

06-22-2015, 10:54 PM	#21
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 479 Trader Rating: (16) Feedback Score: 16 reviews	shoot me price for catch can and lines please! Interested

06-23-2015, 06:59 AM	#23
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Pms replied. My prices adjustments didnt save for some reason.. will fix later. __________________

06-23-2015, 07:00 AM	#24
hobbs Nissanaholic! Join Date: Aug 2010 Location: Under a rock Posts: 2,264 Trader Rating: (43) Feedback Score: 43 reviews	Have an extra crank pulley in good shape?

06-23-2015, 05:01 PM	#26
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Lowered some prices and listed some things for part out. __________________

06-24-2015, 06:09 PM	#27
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 39 Posts: 124 Trader Rating: (13) Feedback Score: 13 reviews	Upppppppppp __________________

06-25-2015, 02:04 AM	#28
SidewayzAsFck Zilvia Junkie Join Date: May 2012 Location: Jersey Posts: 479 Trader Rating: (16) Feedback Score: 16 reviews	Looking for s14 sr waterneck

06-25-2015, 09:35 AM	#29
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 41 Posts: 4,828 Trader Rating: (17) Feedback Score: 17 reviews	If you power FC is for 1998 kouki model sr20det I am interested