VA Authentic Made in Japan C's Shifter for 5 Speed S13 S14 SR20/KA24/CA18 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Bernie (NoVA) · 04-12-2014, 02:10 PM

I have a used Genuine C's Shifter for S13 and S14 CA18/SR20/KA24/RB20 5 Speed Transmissions - bought in Japan on my most recent trip. Authentic, real deal no BS. These have been long discontinued, as C's is no longer in business. Cheap knock offs break, wear down and rattle because they lack the rubber vibration isolator in the shift lever.

Complete ready to install kit with all needed parts.
Boot is like new, no tears, bushing is in clean shape.
Instruction sheet will be included.

$175 picked up in Alexandria
$185 shipped
PayPal adds 3%

Bernie (NoVA) · 04-26-2014, 01:04 AM

Updated.
Top side.

jr_ss · 04-26-2014, 07:37 AM

For all you S-chassis rookies out there, this is one of the best shifters you can get. Buttery smooth shifts, with no vibration or rattles like the cheap crap on the market now. I had one years ago before I swapped to a Z32 trans.

GLWS Bernie...

Bernie (NoVA) · 05-21-2014, 01:05 PM

Quote:

Originally Posted by jr_ss

GLWS Bernie...

Thanks back to top.

LoSt180 · 05-22-2014, 12:54 PM

NVM. Bump for good seller!

RocketBUNNY · 05-22-2014, 01:27 PM

If buddy doesn't get back to me about the turbo and turbo mani I'm suppose to buy from him tonight I'll probably talk to you tomorrow and snag this up

Bernie (NoVA) · 05-25-2014, 11:33 AM

Quote:

Originally Posted by RocketBUNNY

If buddy doesn't get back to me about the turbo and turbo mani I'm suppose to buy from him tonight I'll probably talk to you tomorrow and snag this up

Sounds good. Let me know.

Bernie (NoVA) · 06-08-2014, 05:50 AM

Quote:

Originally Posted by LoSt180

NVM. Bump for good seller!

Thanks back to top.

mewantkouki · 06-08-2014, 07:12 AM

I've got one too, and I paid more than the OP's price... Bump!

Bernie (NoVA) · 06-26-2014, 11:50 PM

Quote:

Originally Posted by mewantkouki

I've got one too, and I paid more than the OP's price... Bump!

Thanks much appreciated

nextproject · 06-28-2014, 11:05 AM

Any ideas on the knob height as compared to stock? B&M? Ive currently got a B&M and yeah, it rattles at ~4500 rpm, plus ive got a C's on my SW20 and i love it, just concerned that the knob will sit higher as compared to my B&M. have you installed this? can you comment on the shift knob height?

Bernie (NoVA) · 06-28-2014, 11:17 AM

Installed height is the same as stock

Bernie (NoVA) · 07-17-2014, 08:55 PM

Top side for July

Bernie (NoVA) · 08-10-2014, 10:53 PM

Back to the front

Mr.slipngrip · 08-10-2014, 11:14 PM

will this work with a rb25?

bigs · 08-11-2014, 09:18 AM

i'll take it, sent you a pm

Bernie (NoVA) · 08-11-2014, 09:27 AM

Quote:

Originally Posted by Mr.slipngrip

will this work with a rb25?

I know its also listed for RB20 trans, but it can be used in a RB25 with a simple modification.

NismoPlsr · 08-11-2014, 06:15 PM

It will not work with RB25, the bushing is different and so is the spacer.

Mr.slipngrip · 08-11-2014, 08:17 PM

Thanks for the info there Nismo saved me there lol , guess I'll be passing on this one

BoostTaco · 08-12-2014, 04:14 AM

You have a pm.

Bernie (NoVA) · 08-12-2014, 01:15 PM

Quote:

Originally Posted by Mr.slipngrip

Thanks for the info there Nismo saved me there lol , guess I'll be passing on this one

Did a bit more research - its simple to modify for RB25 use, just needs a different shifter bushing and ~1mm trimming on the spacer.

Mr.slipngrip · 08-27-2014, 02:59 PM

sent you a pm.

Mr.slipngrip · 09-06-2014, 05:47 PM

Soo any new on shipping?

04-12-2014, 02:10 PM	#1
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Authentic Made in Japan C's Shifter for 5 Speed S13 S14 SR20/KA24/CA18/RB20 I have a used Genuine C's Shifter for S13 and S14 CA18/SR20/KA24/RB20 5 Speed Transmissions - bought in Japan on my most recent trip. Authentic, real deal no BS. These have been long discontinued, as C's is no longer in business. Cheap knock offs break, wear down and rattle because they lack the rubber vibration isolator in the shift lever. Complete ready to install kit with all needed parts. Boot is like new, no tears, bushing is in clean shape. Instruction sheet will be included. $175 picked up in Alexandria $185 shipped PayPal adds 3% Last edited by Bernie (NoVA); 05-25-2014 at 11:34 AM..

04-26-2014, 07:37 AM	#3
jr_ss Post Whore! Join Date: Dec 2005 Location: Pa Posts: 6,410 Trader Rating: (35) Feedback Score: 35 reviews	For all you S-chassis rookies out there, this is one of the best shifters you can get. Buttery smooth shifts, with no vibration or rattles like the cheap crap on the market now. I had one years ago before I swapped to a Z32 trans. GLWS Bernie... __________________ My SR20VET Does your VTC gear rattle in your S14/15 SR? PM me.

05-22-2014, 12:54 PM	#5
LoSt180 Zilvia FREAK! Join Date: May 2013 Location: MD Posts: 1,049 Trader Rating: (18) Feedback Score: 18 reviews	NVM. Bump for good seller! Last edited by LoSt180; 05-22-2014 at 12:59 PM.. Reason: Didn't realize he has several of these.

08-11-2014, 06:15 PM	#18
NismoPlsr Zilvia Addict Join Date: Apr 2003 Location: CT Age: 40 Posts: 690 Trader Rating: (21) Feedback Score: 21 reviews	It will not work with RB25, the bushing is different and so is the spacer. __________________ S12 \|\| KN13 \|\| S13 \|\| B16

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-26-2014, 01:04 AM	#2
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Updated. Top side.

05-22-2014, 01:27 PM	#6
RocketBUNNY Zilvia Junkie Join Date: Feb 2013 Location: Red Deer, AB Canada Age: 39 Posts: 321 Trader Rating: (11) Feedback Score: 11 reviews	If buddy doesn't get back to me about the turbo and turbo mani I'm suppose to buy from him tonight I'll probably talk to you tomorrow and snag this up

06-08-2014, 07:12 AM	#9
mewantkouki Zilvia FREAK! Join Date: Nov 2007 Location: Orlando, Fl Age: 37 Posts: 1,249 Trader Rating: (36) Feedback Score: 36 reviews	I've got one too, and I paid more than the OP's price... Bump!

06-28-2014, 11:05 AM	#11
nextproject Zilvia Member Join Date: Nov 2011 Location: Chattanooga, TN Age: 42 Posts: 277 Trader Rating: (9) Feedback Score: 9 reviews	Any ideas on the knob height as compared to stock? B&M? Ive currently got a B&M and yeah, it rattles at ~4500 rpm, plus ive got a C's on my SW20 and i love it, just concerned that the knob will sit higher as compared to my B&M. have you installed this? can you comment on the shift knob height?

06-28-2014, 11:17 AM	#12
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Installed height is the same as stock

07-17-2014, 08:55 PM	#13
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Top side for July

08-10-2014, 10:53 PM	#14
Bernie (NoVA) Post Whore! Join Date: Jul 2003 Location: Alexandria VA Posts: 5,979 Trader Rating: (363) Feedback Score: 363 reviews	Back to the front

08-10-2014, 11:14 PM	#15
Mr.slipngrip Zilvia Member Join Date: Jun 2014 Location: Orlando Posts: 200 Trader Rating: (5) Feedback Score: 5 reviews	will this work with a rb25?

08-11-2014, 09:18 AM	#16
bigs Nissanaholic! Join Date: Sep 2007 Location: Atlanta Age: 33 Posts: 1,674 Trader Rating: (6) Feedback Score: 6 reviews	i'll take it, sent you a pm

08-11-2014, 08:17 PM	#19
Mr.slipngrip Zilvia Member Join Date: Jun 2014 Location: Orlando Posts: 200 Trader Rating: (5) Feedback Score: 5 reviews	Thanks for the info there Nismo saved me there lol , guess I'll be passing on this one

08-12-2014, 04:14 AM	#20
BoostTaco Zilvia Member Join Date: Dec 2010 Location: Minnesota Age: 38 Posts: 150 Trader Rating: (15) Feedback Score: 15 reviews	You have a pm.

08-27-2014, 02:59 PM	#22
Mr.slipngrip Zilvia Member Join Date: Jun 2014 Location: Orlando Posts: 200 Trader Rating: (5) Feedback Score: 5 reviews	sent you a pm.

09-06-2014, 05:47 PM	#23
Mr.slipngrip Zilvia Member Join Date: Jun 2014 Location: Orlando Posts: 200 Trader Rating: (5) Feedback Score: 5 reviews	Soo any new on shipping?