|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
05-29-2018, 09:31 PM | #1 |
Join Date: May 2018
Location: hoodbridge
Age: 25
Posts: 1
Trader Rating: (0)
Feedback Score: 0 reviews
|
Ka24de engine to trans bracket not lining up
I'm doing an auto to manual swap on my s13, but one of the engine to trans gussets (the two brackets on either side of the motor that bolt to the transmission) will not line up with the bolt holes in the manual trans adapter plate or the bellhousing.
I've not been able to find any information on this or anyone else thats had a similar problem with the 5 speed swap. Anyone ever had this problem or have any suggestions? |
Sponsored Links |
05-30-2018, 07:59 AM | #3 |
Nissanaholic!
|
IIRC all the bolt holes line up with the engine and transmission, I don't remember any extra brackets on the side of the engine that would bolt to the transmission
|
06-17-2018, 03:55 PM | #7 |
Zilvia Member
|
can confirm, trash it!
I remember putting these back on after my tranny swap, I kept confusing which side went to which, and then getting the orientation wrong.
__________________
5.3 V8 Swap w/ Nitrous |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|