Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 02-19-2017, 04:49 PM   #1
BillyPinto
 
Join Date: Nov 2016
Location: Ct
Posts: 1
Trader Rating: (0)
BillyPinto is an unknown quantity at this point
Feedback Score: 0 reviews
Ka24de timing help!

Need some help here. 91 KA24DE. Starts and runs but idles between 1500-2000 rpm. Fixed all the vacuum leaks I could find, Replaced iacv, secondary air valve, maf, tps, plugs, wires, and the cap and rotor for the distributor. I also pulled off the timing covers, set it to TDC, and reinstalled lower and upper timing chains according to FSM specs. The car will still not properly time. My distributor rotor is pointing to plug #1 at compression TDC and I still can not get it in range of correct factory timing. The only way I can is to either retard or advance it past the point where the distributor can be bolted back into its correct bolt holes. Every time I try to go a tooth back or forward with the distributor, I end up being too far or not far enough again. Any ideas?! Been at this for weeks and can't figure it out.
BillyPinto is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:39 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net