PBM oval exhaust system...

[Jesse SR20]

排気パーツ Exhaust Parts - POWERED BY MAX

Went to the PBM site this morning and saw this beast. It isn't new apparently, but it is now for sale, which is new. Pretty damn cool in my book. Their design and craft work, soup to nuts. I admire that type of originality.

[future]

Thread on this already. There is even a pbm thread

[ghoti]

Originally Posted by future

Thread on this already. There is even a pbm thread

^what he said. Two years ago

They even put sound clips

[Corbic]

For $1,200 you can destroy a lot of boom tubes from scraping.

[Jesse SR20]

Originally Posted by Corbic

For $1,200 you can destroy a lot of boom tubes from scraping.

... buuuut this doesn't scrape. It sits above the frame rails. Hence the oval.

What ever. delete

[Bushido]

that exhaust is cool n shit, but i got a 3in turbo back that is fully above the frame rails made at a local shop for $200

[Corbic]

Originally Posted by Bushido

that exhaust is cool n shit, but i got a 3in turbo back that is fully above the frame rails made at a local shop for $200

Straight pipe?

[ZX88]

This isnt new

[Jesse SR20]

Originally Posted by ZX88

This isnt new

It's on sale now. That is new. My bad for not finding the PBM thread.

[Irresistible]

I'd rather blow up four $300 exhausts than have one $1,200 exhaust.

[Corbic]

Originally Posted by andrewballa

yeah,think so,that exhaust is cool n shit, but i got a 3in turbo back that is fully above the frame rails made at a local shop for $200

Custom turbo down pipe?

[edmorl]

not a fan of the oval tips

[TheRealSy90]

I've got a Moonface downpipe to ISIS 3" straight pipe with 4" tips that is fully above the frame rails. Chopped all the hangers and welded them higher. Way cheaper.

[Corbic]

Originally Posted by TheRealSy90

I've got a Moonface downpipe to ISIS 3" straight pipe with 4" tips that is fully above the frame rails. Chopped all the hangers and welded them higher. Way cheaper.

Moonface DP is fucking expensive. If you already have it, thats one thing, but I guess the PBM Cobra would be another good alternative, it includes the turbo elbow.

[Jesse SR20]

Corbic, I'm starting to think you and I are part of a small minority who actually appreciate what it is that PBM has done.

The majority of the 240 community has more of a "I can buy 50 cans of Spaghetti-O's for the price of 1 nice Italian dinner " attitude.

[Irresistible]

PBM makes awesome stuff. It's just that most 240 owners are broke as hell. I'm totally okay with dropping a bunch of money on COOL parts, but not for just an exhaust. Especially if the exhaust costs more than my car originally was when I got it...

[nighthawk48]

Originally Posted by Jesse SR20

Corbic, I'm starting to think you and I are part of a small minority who actually appreciate what it is that PBM has done.

The majority of the 240 community has more of a "I can buy 50 cans of Spaghetti-O's for the price of 1 nice Italian dinner " attitude.

next thing you know other people are going to start comparing ISIS with PBM

[ghoti]

Originally Posted by Jesse SR20

The majority of the 240 community has more of a "I can buy 50 cans of Spaghetti-O's for the price of 1 nice Italian dinner " attitude.

I have to disagree with you on that quote regarding exhausts.

If anything it's "I'd rather eat for 50 days a home-cooked meal than for 1 day an Italian meal"

IMO its better to get a custom exhaust to your specs and needs rather than a "cookie-cutter" exhaust.

A custom exhaust can be made for much cheaper and work just as good or better for your likings.

Sort of like BRM exhausts back in the day

[Matej]

It seems more of a track car accessory than anything. Who cares.
Italian food is garbage.

[ZenkiKid]

its expensive because the dowel used to oval the pipes is expensive to replace (From what I remember reading.

[Corbic]

Originally Posted by Jesse SR20

Corbic, I'm starting to think you and I are part of a small minority who actually appreciate what it is that PBM has done.

The majority of the 240 community has more of a "I can buy 50 cans of Spaghetti-O's for the price of 1 nice Italian dinner " attitude.

Uh, I think you are miss understanding me. While the $1,200 price is understandable, oval tubing is expensive, and this exhaust had a lot of work... its just not worth it in my book.

$250 - $400 buys you any number of exhaust systems, so if you destroy them scrapping - you'd have to destroy 4-5 of them before you go "fuck, should have bought that PBM setup".

[Corbic]

Originally Posted by ZenkiKid

its expensive because the dowel used to oval the pipes is expensive to replace (From what I remember reading.

Yes sir.

3 Inch Oval Stainless Tubing 40 Inches long - Oval Tubing - Straight Lengths - 3" OVAL TUBING 30VL-40SS - SpinTech Performance Mufflers

$85 for 40-inches

compared to

$32 for 40 inches of round.

3" Round Exhaust Tubing - Round Tubing - Round Tubing Straight Lengths - 30RD-40..3" ROUND TUBING, 40" long - SpinTech Performance Mufflers

Pretty much explains why this is 2-3 times more expensive then a normal boom-tube set up.

[Jesse SR20]

Originally Posted by Corbic

$250 - $400 buys you any number of exhaust systems, so if you destroy them scrapping - you'd have to destroy 4-5 of them before you go "fuck, should have bought that PBM setup".

Using FRSport's website, I added to cart all Megan exhaust parts. Cat-back, test pipe, downpipe, elbow.

Total - $728.80

Megan parts are cheap quality, and fitment is never spot on. Not sure where everyone is getting a ball park of $300-$400 for what this PBM system includes.

I'm not building it up as the end all be all. It's not. But what it is can't be had for $300. Stainless, pro fitment, solid mounted, zero clearance issues. I feel it's a good deal, and you can't argue with someone's feelings.

[Corbic]

Originally Posted by Jesse SR20

Using FRSport's website, I added to cart all Megan exhaust parts. Cat-back, test pipe, downpipe, elbow.

Total - $728.80

Megan parts are cheap quality, and fitment is never spot on. Not sure where everyone is getting a ball park of $300-$400 for what this PBM system includes.

I'm not building it up as the end all be all. It's not. But what it is can't be had for $300. Stainless, pro fitment, solid mounted, zero clearance issues. I feel it's a good deal, and you can't argue with someone's feelings.

*ISIS Straight Dual 3" Tip Exhaust - Nissan 240sx 89-94 - Enjuku Racing Parts, LLC

$250. You can match that up with the $350 PBM Cobra pipe and your at less then half.

As others have mentioned, most shops can make you a setup for a few hundred bucks.

[ksharp]

When they say axle back, does it really mean axle back or catback?

[Corbic]

Originally Posted by ksharp

When they say axle back, does it really mean axle back or catback?

Doesn't really matter - considering you can't easily mate the oval to a standard 3".

[Jesse SR20]

Originally Posted by Corbic

*ISIS Straight Dual 3" Tip Exhaust - Nissan 240sx 89-94 - Enjuku Racing Parts, LLC

$250. You can match that up with the $350 PBM Cobra pipe and your at less then half.

As others have mentioned, most shops can make you a setup for a few hundred bucks.

Don't forget a test pipe - $65. Total - $665

Oval piping has more internal area than 3" round. No gaskets to mess with, no flanges to scrape up and bend. I've been there done that with janky set ups. Prices are always high on new products. Give it a year or 2, I'm tellin' ya.

[Seraphim38]

I wish the moonface downpipe was still available. Would like to run 4" oval piping from the downpipe to the cat, though cat back i already have a custom made stainless mandrel bend system that is awesome.

A full oval system with no mufflers, resonators or cats really limits the applicable market. If they designed one for street use they would sell more units and wouldn't have to charge 1200 for one.

[Irresistible]

Originally Posted by Jesse SR20

Don't forget a test pipe - $65. Total - $665

Oval piping has more internal area than 3" round. No gaskets to mess with, no flanges to scrape up and bend. I've been there done that with janky set ups. Prices are always high on new products. Give it a year or 2, I'm tellin' ya.

My eBay test pipe was $25, stainless, and has been hit by rumble strips and a bunch of other shit, and it's holding up.


But this is just beating a dead horse, let people buy what they want. PBM stuff is usually of pretty good quality, but also costs a pretty penny.

[KendallH]

Am I the only one who thinks this exhaust doesn't really sound good?