|
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
10-07-2013, 01:30 AM | #1 |
S1 RB25det into S14 full swap
Hello fellow Zilvians,
For sale is a complete series 1 rb25det into s14 swap. Included is: Rb25det motor and tranny Mckinney motor mounts and drive shaft Rb25det ECU and full wiring harness (speedo and windshield wipers were kept and work) FMIC and IC piping Turbosmart BOV Cold-air intake Downpipe Clutch Slave A compression test was done and all cylinders were all within a 5psi range. The donor s14 is a garage queen. I took this motor out to strip the car down and build it back up and in the process, found another RB25 with a bunch of bolt ons that I ended up buying. This motor ran fine in my car, the only problem was an occasional hiccup in the acceleration that I've guessed is due to a boost leak. That being said, I did not drive the car much as I have had it off the road since I purchased it two years ago. This sale does not include: Radiator Power steering pump or it's belt Things you will need to make this swap run well: Stock or aftermarket KA radiator with hoses(other rads work as well) Gaskets for the intake manifold and downpipe Several hose clamps & intercooler piping couplers(though all are included, you may want to replace some) If you already had an RB swap in mind and you were going from scratch, this is a great way to get started. This is an especially great platform if you have plans for big power down the road. Almost everything needed to have the engine running well in the bay of a 240 is included. I am not willing to split the parts up yet, however, if I get a reasonable offer on the motor alone, I may consider doing so. Asking $4000, o.b.o., motor located in Windsor, Ontario I may be willing to bring it over the Michigan border to save you the trouble of dealing with US customs. Otherwise, I'm willing to ship it at the buyer's expense. For any questions, please pm, feel free to ask for my number Nick |
|
Sponsored Links |
12-19-2013, 07:05 PM | #9 |
Leaky Injector
Join Date: Mar 2013
Location: Topeka, Kansas
Age: 30
Posts: 124
Trader Rating: (3)
Feedback Score: 3 reviews
|
Will to part with the pipe that goes from outlet of compressor side to the first pipe on the drivers side of the intercooler?
Sent from my SAMSUNG-SGH-I337 using Tapatalk |
Bookmarks |
Tags |
mckinney, rb25, rb25 harness, rb25 s14, s14 |
|
|