NJ Racing Hart C5 3piece 17x8? 17x9.5? 4/5x114.3 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

markhit · 01-29-2018, 05:15 PM

- Brand/Model: Racing Hart C5 3piece
- Bolt Pattern: 4/5x114.3
- Front: 17x8?
- Rear: 17x9.5
- Color Finish: Silver
- Price: $1,000

For sale are my Racing Hart C5 3piece wheels, they are multilug, so 4/5x114.3, they are 17in, I believe the rears are 17x9.5 and the front seems like they’re 17x8, the sizing and offset is unknown lol, I can check when they actually come off the car.

They are in very good condition overall, one of the front lips are bent though, but being it’s 3 piece and the front specs are weak, figure someone would relip them anyway.

The tires are in good condition overall as well.

I can get more pictures of the wheels

Asking $1,000 obo + shipping. Buyer pays shipping
I can shipbu greyhound so it would be a ton cheaper, about $100 on the expensive side. Would have to just pick them up from your closest station.

markhit · 01-31-2018, 09:18 AM

Need gone, someone make an offer!

markhit · 02-01-2018, 02:56 PM

Someone make and offer!

zoo · 02-01-2018, 03:45 PM

On these the lips and barrels are welded together.

markhit · 02-01-2018, 05:56 PM

Quote:

Originally Posted by zoo

On these the lips and barrels are welded together.

Are they really? If I’m gonna be honest I had no clue and this is new to me lol. I was told they were 3 piece. So now they’re a 2 piece

zoo · 02-02-2018, 08:55 AM

Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

markhit · 02-02-2018, 12:37 PM

Quote:

Originally Posted by zoo

Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

That’s pretty lame, feel like it should be a requested thing. Eh it’s whatever though. Thanks for the info!

markhit · 02-05-2018, 06:02 PM

Need gone. Someone offer up!

markhit · 02-07-2018, 08:53 AM

Up. No longer need or want

markhit · 02-09-2018, 05:10 PM

Someone make an offer. Have no need for them!

markhit · 02-12-2018, 05:36 PM

Bump to the top

TheRealSy90 · 02-12-2018, 05:57 PM

WheelFlip and JordanInnovations can make these into true 3-Piece.

markhit · 02-15-2018, 12:10 PM

Quote:

Originally Posted by TheRealSy90

WheelFlip and JordanInnovations can make these into true 3-Piece.

Thanks for the info!

GenkiZenki808 · 02-25-2018, 01:32 AM

I think I have center caps for these laying around somewhere if you’re
Interested in buying them

Delrio916 · 10-19-2018, 04:07 PM

Offsets would help you sell them ! I need to know Offset. I took a picture in selfe mode to find mine....

its right on one of the spokes

01-29-2018, 05:15 PM	#1
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Racing Hart C5 3piece 17x8? 17x9.5? 4/5x114.3 - Brand/Model: Racing Hart C5 3piece - Bolt Pattern: 4/5x114.3 - Front: 17x8? - Rear: 17x9.5 - Color Finish: Silver - Price: $1,000 For sale are my Racing Hart C5 3piece wheels, they are multilug, so 4/5x114.3, they are 17in, I believe the rears are 17x9.5 and the front seems like they’re 17x8, the sizing and offset is unknown lol, I can check when they actually come off the car. They are in very good condition overall, one of the front lips are bent though, but being it’s 3 piece and the front specs are weak, figure someone would relip them anyway. The tires are in good condition overall as well. I can get more pictures of the wheels Asking $1,000 obo + shipping. Buyer pays shipping I can shipbu greyhound so it would be a ton cheaper, about $100 on the expensive side. Would have to just pick them up from your closest station.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2018, 09:18 AM	#2
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Need gone, someone make an offer!

02-01-2018, 02:56 PM	#3
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Someone make and offer!

02-01-2018, 03:45 PM	#4
zoo Zilvia Member Join Date: Oct 2011 Location: Dallas, TX Posts: 167 Trader Rating: (1) Feedback Score: 1 reviews	On these the lips and barrels are welded together.

02-02-2018, 08:55 AM	#6
zoo Zilvia Member Join Date: Oct 2011 Location: Dallas, TX Posts: 167 Trader Rating: (1) Feedback Score: 1 reviews	Yeah. But its a common practice, SSR, Enkei, Stern, Starform, etc all have models that are assembled as 3 piece and then lip/barrel are welded togerther.

02-05-2018, 06:02 PM	#8
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Need gone. Someone offer up!

02-07-2018, 08:53 AM	#9
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Up. No longer need or want

02-09-2018, 05:10 PM	#10
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Someone make an offer. Have no need for them!

02-12-2018, 05:36 PM	#11
markhit Join Date: Oct 2012 Location: new jersey Age: 30 Posts: 28 Trader Rating: (0) Feedback Score: 0 reviews	Bump to the top

02-25-2018, 01:32 AM	#14
GenkiZenki808 Zilvia Junkie Join Date: Jun 2012 Location: Hawaii Posts: 477 Trader Rating: (13) Feedback Score: 13 reviews	I think I have center caps for these laying around somewhere if you’re Interested in buying them

10-19-2018, 04:07 PM	#15
Delrio916 Join Date: Oct 2018 Location: Sacramento Ca Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Offsets would help you sell them ! I need to know Offset. I took a picture in selfe mode to find mine.... its right on one of the spokes