Anyone Running PBM 2016 Model w/ Z32 E-Brake?

[afishysilvia]

Quick question,

I’m installing the new 2016 PBM drop knuckles on my s14 and it has the provisions for the z32 e brake. My question might be simple but want to confirm with someone running it (if any), the location on the mounting for the ebrake shoe assembly (the large bolt that slides through the knuckle) is now on the bottom versus the top. In theory do I swap the right to the left? I’ve looked all over PBM’s site and couldn’t find any detailed steps. I can mount this upside down but it puts the caliper opening on the dustshield facing the rear instead of the front.

Any help would be appreciated.

Thanks

[JrDarknes]

This might help

https://www.instagram.com/p/BQYYWdHjPR6/

If not I would Message them, they usually respond to me fairly quickly.

[afishysilvia]

Originally Posted by JrDarknes

This might help

https://www.instagram.com/p/BQYYWdHjPR6/

If not I would Message them, they usually respond to me fairly quickly.

You sir are awesome, thank you so much. Exactly what I needed, merry Christmas.