OR AEM 30-6050 Box + JZ & SR STUFF - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Options13 · 02-17-2018, 03:45 PM

OS Giken Twin Disk for SR20 (retail $2500)

This was on my SR and i didn't trim my input shaft correctly so it just slipped, so there are hot spots on the clutch.. It may work fine, or it may need a rebuild kit, however i'm only asking $400 shipped for it..

I had these on my 1jz vvti for about 1k miles, i am now converting to e85 so i will need bigger injectors ..

1jz vvti intake manifold with fuel rail, 90mm throttle body, and fittings $350 shipped
1jz vvti stock cams - $300 shipped

Walbro 255 - $40shipped

Authentic Bride Low-max Seats with FIA CERT (2) $600 EACH PICKED UP *looking to sell both at the same time.. weather it's 2 buyers or 1.

SR20 Wiseco pistons -12CC 1.260 X 86.50MM - $300 shipped.
SR20VE Stock Cams - $150 picked up
Fresh SR block re-honed and decked - $400 picked up
Sr20 Crank - $150 picked up
SR20 Head new guides, 3 angle valve job, 0 miles on it - $400 picked up
SR20 VVL Hydrolic Lifters - $150 shipped

collins sr to cd009 transmission kit - $1000 takes everything
comes with CD009, Bell housing Adapter, Shifter, and Transmission Mount

chrislikesthings · 02-18-2018, 07:31 PM

Did you use a jumper harness for the 6050 box? Or have the harness built for it? Whats the least you'll take for the injectors?

B-Rad54 · 02-18-2018, 08:42 PM

Can you send pictures of the clutch?

SilverStiyle · 02-20-2018, 06:52 PM

Is this the car that savage impression is doing the giveaway for?

Options13 · 02-21-2018, 07:37 PM

yup that's the one!

SilverStiyle · 02-21-2018, 07:40 PM

Nice. I bought one of the stickers. Haven’t found a spot for it on my sileighty yet

Psychomoongoose · 02-22-2018, 10:47 PM

Sent PM regarding CD009 stuff

Options13 · 02-25-2018, 05:23 PM

Bummmmmmmmp

Options13 · 04-14-2018, 12:43 PM

bummmpppp still for sale!

240sxrb30 · 04-15-2018, 12:13 PM

Can I get a pic of the ps res pp ready

Options13 · 04-18-2018, 11:16 AM

bump, bump, bump it up

IchiXD · 04-18-2018, 12:02 PM

Interested in the clutch. What did you need to trim your input shaft for?

Options13 · 04-29-2018, 07:47 PM

the stock input shaft is just too long, i shot you a message.

02-17-2018, 03:45 PM	#1
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	AEM 30-6050 Box + JZ & SR STUFF OS Giken Twin Disk for SR20 (retail $2500) This was on my SR and i didn't trim my input shaft correctly so it just slipped, so there are hot spots on the clutch.. It may work fine, or it may need a rebuild kit, however i'm only asking $400 shipped for it.. I had these on my 1jz vvti for about 1k miles, i am now converting to e85 so i will need bigger injectors .. 1jz vvti intake manifold with fuel rail, 90mm throttle body, and fittings $350 shipped 1jz vvti stock cams - $300 shipped Walbro 255 - $40shipped Authentic Bride Low-max Seats with FIA CERT (2) $600 EACH PICKED UP looking to sell both at the same time.. weather it's 2 buyers or 1. SR20 Wiseco pistons -12CC 1.260 X 86.50MM - $300 shipped. SR20VE Stock Cams - $150 picked up Fresh SR block re-honed and decked - $400 picked up Sr20 Crank - $150 picked up SR20 Head new guides, 3 angle valve job, 0 miles on it - $400 picked up SR20 VVL Hydrolic Lifters - $150 shipped collins sr to cd009 transmission kit - $1000 takes everything comes with CD009, Bell housing Adapter, Shifter, and Transmission Mount __________________ Drift team page www.facebook.com/savageimpression Last edited by Options13; 04-18-2018 at 11:16 AM..*

02-20-2018, 06:52 PM	#4
SilverStiyle Join Date: Apr 2016 Location: Virginia Age: 35 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Is this the car that savage impression is doing the giveaway for? __________________ It was rubbish when it was new,it was built by idiots,and it's rubbish now

02-21-2018, 07:37 PM	#5
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	yup that's the one! __________________ Drift team page www.facebook.com/savageimpression

02-21-2018, 07:40 PM	#6
SilverStiyle Join Date: Apr 2016 Location: Virginia Age: 35 Posts: 41 Trader Rating: (0) Feedback Score: 0 reviews	Nice. I bought one of the stickers. Haven’t found a spot for it on my sileighty yet __________________ It was rubbish when it was new,it was built by idiots,and it's rubbish now

02-22-2018, 10:47 PM	#7
Psychomoongoose Zilvia Junkie Join Date: Oct 2009 Location: Santa Rosa, CA Age: 42 Posts: 359 Trader Rating: (5) Rides Gallery: Psychomoongoose Feedback Score: 5 reviews	Sent PM regarding CD009 stuff __________________ As long as you're not a ham-fisted retard there shouldn't be a problem.

02-18-2018, 07:31 PM	#2
chrislikesthings Join Date: Mar 2013 Location: summerville Posts: 47 Trader Rating: (2) Feedback Score: 2 reviews	Did you use a jumper harness for the 6050 box? Or have the harness built for it? Whats the least you'll take for the injectors?

02-18-2018, 08:42 PM	#3
B-Rad54 Join Date: Oct 2015 Location: North TX Posts: 5 Trader Rating: (3) Feedback Score: 3 reviews	Can you send pictures of the clutch?

02-25-2018, 05:23 PM	#8
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	Bummmmmmmmp __________________ Drift team page www.facebook.com/savageimpression

04-14-2018, 12:43 PM	#9
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	bummmpppp still for sale! __________________ Drift team page www.facebook.com/savageimpression

04-15-2018, 12:13 PM	#10
240sxrb30 Leaky Injector Join Date: May 2006 Location: Lenoir NC, Posts: 94 Trader Rating: (1) Feedback Score: 1 reviews	Can I get a pic of the ps res pp ready

04-18-2018, 11:16 AM	#11
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	bump, bump, bump it up __________________ Drift team page www.facebook.com/savageimpression

04-18-2018, 12:02 PM	#12
IchiXD Join Date: Apr 2016 Location: Tennessee Posts: 9 Trader Rating: (1) Feedback Score: 1 reviews	Interested in the clutch. What did you need to trim your input shaft for?

04-29-2018, 07:47 PM	#13
Options13 Nissanaholic! Join Date: May 2007 Location: OR Posts: 1,825 Trader Rating: (43) Feedback Score: 43 reviews	the stock input shaft is just too long, i shot you a message. __________________ Drift team page www.facebook.com/savageimpression