|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Chat General Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
03-13-2017, 06:43 PM | #1 |
Zilvia Junkie
|
Still having fan clutch problems
Car is stock. I have replaced the fan clutch twice. First one was a duralast one and now a new oem one and still having the noise and drag on the engine at speeds under about 50mph which I didn't have with the original one until it went bad. When it did go bad it was loud all the time. Replaced water pump when i replaced the fan clutch the second time. Has anyone gotten bad fan clutches that were new? I know the oem one probably was in the wharehouse in Tennessee for a long time. Wondering if that could affect the silicon? Anyway any ideas?
__________________
z32 front brakes, spl tc rods |
Sponsored Links |
05-26-2017, 07:53 PM | #4 |
Zilvia Junkie
|
Just put another new oem fan clutch in my KA today and its actually worse than the first oem replacement. I hear it slightly all the time even at constant speed. HP is down. Very frustrating. My engine is great with exception of this.
__________________
z32 front brakes, spl tc rods |
05-30-2017, 09:15 PM | #7 |
Zilvia Junkie
|
i don't think they do. He just said that because the fan is supposed to pull more air in at the same revolution so the fan clutch shouldn't have to engage as much supposedly.
__________________
z32 front brakes, spl tc rods |
05-31-2017, 01:41 PM | #9 |
Zilvia Junkie
|
I turned the fan by hand today and it spends between a 1/4 - 1/3 of a turn. Is that normal for a good fan clutch or should it spin more than that?
__________________
z32 front brakes, spl tc rods |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|