IA 18" step lip barrels, 5 inch dish - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

snags · 06-18-2013, 05:48 PM

bought these off a member here but did not end up using them. these are in almost brand new shape and are beautiful. no scratches of any kind.
if you need more pictures or measurements let me know

for 18" wheel
5 inches of dish, 4.5" at the tire bead.
36 bolt holes
these have a rolled lip edge not an "L"

this listing is for the pair only
im looking for SOLD
thanks alot zilvia

[IMG]

[/IMG]

No 240.. No id · 06-18-2013, 10:21 PM

why is it not 40 bolts? i'd be all over them

JetS500 · 06-19-2013, 03:27 AM

Quote:

Originally Posted by No 240.. No id

why is it not 40 bolts? i'd be all over them

agreed. but glws @OP. someone could use these.

snags · 06-19-2013, 12:27 PM

thank you guys for the interest! They are for a work meister. but should work for any 36 bolt 18" with step lip

DeleriousZ · 06-19-2013, 02:35 PM

Are you sure those are 5"? aren't they usually measured from the inside of the lip where the tire bead seats?

snags · 06-19-2013, 03:12 PM

yes they are 5 inch from the tired bead to the outer edge

JetS500 · 06-19-2013, 05:18 PM

Quote:

Originally Posted by DeleriousZ

Are you sure those are 5"? aren't they usually measured from the inside of the lip where the tire bead seats?

If you lookclosely at pic, @OP measured from end to end and it ws roughly 5.25"~ therefore from bead would be 5",. if not, extremely close.

snags · 09-21-2013, 10:17 PM

bump i still have these and i am taking offers! great upgrade for your 18" meisters!!!

Thaiboy · 09-22-2013, 12:09 AM

fuuuuu
Need 40 hole ones. :/

GLWS though.

*dawagarage* · 09-22-2013, 12:40 AM

these are 4.5" lips

choleaoum · 09-22-2013, 04:58 PM

^ they are 5's. look at the tape measure again. he measured from the edge which is ~5.25" almost.

give or take from the inner bead it's very close to 5" as someone here also stated earlier.

*dawagarage* · 09-23-2013, 02:14 AM

Quote:

Originally Posted by choleaoum

^ they are 5's. look at the tape measure again. he measured from the edge which is ~5.25" almost.

give or take from the inner bead it's very close to 5" as someone here also stated earlier.

i did look at the tape measure. the very most outer lip is .5", look at it again. so subtract that .5" from the total.

StrawhatRR · 09-23-2013, 04:14 PM

Going to agree that they are 4.5" lips.
You do not measure the lip edge when calculating width.

snags · 09-26-2013, 10:07 PM

i edited the description a bit. price drop to 375 shipped for minty minty replacement barrels

*dawagarage* · 09-26-2013, 10:40 PM

good deal for sure

snags · 11-03-2013, 11:53 AM

price drop again. i NEED these sold taking reasonable offers

snags · 03-01-2014, 06:34 PM

bump. taking any offer

Vqd240z · 03-01-2014, 08:16 PM

Not familiar with step lips and none step lips. My question is so this will make the rims a 19inch? Can someone explain to me?

bobthebuilder · 03-01-2014, 08:20 PM

No this is an 18" lip that is stepped. 4.5" 36 bolt so this is generally for Japanese wheels.. Namely Work..

Vqd240z · 03-01-2014, 11:51 PM

Ok so I guess they fit my Work VS-SS wheels. Hmmm I would just need rear lips. Anyone know where I could get some 5.5-7 in step lips for my Work wheels. I'm interested in this barrels if I could get other two I'm asking about

slide2unlock · 05-02-2014, 11:19 PM

sell me this i have monies

turbo2nr · 05-03-2014, 08:07 AM

FYI these are perfect to make stepped lip VS-MX 18"

if i still had my vs-mx id be all over these!

slide2unlock · 05-05-2014, 11:20 AM

still hasn't responded :/

chris7ian · 06-11-2014, 12:19 AM

Lips still for sale?

paulseatingabook · 06-12-2014, 12:56 PM

bump for the lols on lip size fights

snags · 01-09-2017, 06:35 PM

bump from the grave.. never ended up selling these.. price has been edited and is firm
(shipping costs me alot, canada)

snags · 03-07-2017, 09:46 PM

bump, looking to get rid of these

snags · 03-24-2017, 10:27 PM

Bump send me offers

snags · 03-25-2017, 06:03 PM

bumpy bumpy

snags · 06-17-2017, 02:58 PM

SOLD thanks zilvia

06-18-2013, 05:48 PM	#1
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	* SOLD* 18" meister barrels, 5 inch dish bought these off a member here but did not end up using them. these are in almost brand new shape and are beautiful. no scratches of any kind. if you need more pictures or measurements let me know for 18" wheel 5 inches of dish, 4.5" at the tire bead. 36 bolt holes these have a rolled lip edge not an "L" this listing is for the pair only im looking for SOLD thanks alot zilvia [IMG][/IMG] Last edited by snags; 07-07-2017 at 10:58 PM..

06-18-2013, 10:21 PM	#2
No 240.. No id Zilvia FREAK! Join Date: Jul 2011 Location: spaceship Posts: 1,340 Trader Rating: (35) Feedback Score: 35 reviews	why is it not 40 bolts? i'd be all over them __________________ You can sleep in your car, but you can't drive your house.

06-19-2013, 02:35 PM	#5
DeleriousZ Zilvia Junkie Join Date: Mar 2009 Location: Kelowna BC Canada Age: 38 Posts: 428 Trader Rating: (3) Feedback Score: 3 reviews	Are you sure those are 5"? aren't they usually measured from the inside of the lip where the tire bead seats? __________________ z31 Lovin' http://imageshack.us/a/img337/2396/lowerit.jpg

09-22-2013, 12:09 AM	#9
Thaiboy Zilvia Member Join Date: Jun 2008 Location: San Diego, California Posts: 247 Trader Rating: (0) Feedback Score: 0 reviews	fuuuuu Need 40 hole ones. :/ GLWS though. __________________

09-22-2013, 12:40 AM	#10
dawagarage Premium Member Join Date: Sep 2006 Location: Bremerton, WA Age: 39 Posts: 2,037 Trader Rating: (23) Feedback Score: 23 reviews	these are 4.5" lips __________________ formerly known as "hotboiblaze" ratsun: dawa (73 datsun 620) clublexus: properD (97 sc300)

06-19-2013, 12:27 PM	#4
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	thank you guys for the interest! They are for a work meister. but should work for any 36 bolt 18" with step lip

06-19-2013, 03:12 PM	#6
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	yes they are 5 inch from the tired bead to the outer edge

09-21-2013, 10:17 PM	#8
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	bump i still have these and i am taking offers! great upgrade for your 18" meisters!!!

09-22-2013, 04:58 PM	#11
choleaoum Zilvia Addict Join Date: Dec 2009 Location: Long Beach, CA Age: 33 Posts: 735 Trader Rating: (7) Feedback Score: 7 reviews	^ they are 5's. look at the tape measure again. he measured from the edge which is ~5.25" almost. give or take from the inner bead it's very close to 5" as someone here also stated earlier.

09-23-2013, 04:14 PM	#13
StrawhatRR Zilvia Junkie Join Date: Jul 2010 Location: South Carolina Posts: 308 Trader Rating: (1) Feedback Score: 1 reviews	Going to agree that they are 4.5" lips. You do not measure the lip edge when calculating width.

09-26-2013, 10:07 PM	#14
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	i edited the description a bit. price drop to 375 shipped for minty minty replacement barrels

09-26-2013, 10:40 PM	#15
dawagarage Premium Member Join Date: Sep 2006 Location: Bremerton, WA Age: 39 Posts: 2,037 Trader Rating: (23) Feedback Score: 23 reviews	good deal for sure __________________ formerly known as "hotboiblaze" ratsun: dawa (73 datsun 620) clublexus: properD (97 sc300)

11-03-2013, 11:53 AM	#16
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	price drop again. i NEED these sold taking reasonable offers

03-01-2014, 06:34 PM	#17
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	bump. taking any offer

03-01-2014, 08:16 PM	#18
Vqd240z Join Date: Jan 2014 Location: Htown Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Not familiar with step lips and none step lips. My question is so this will make the rims a 19inch? Can someone explain to me?

03-01-2014, 08:20 PM	#19
bobthebuilder Zilvia FREAK! Join Date: May 2011 Location: tustin Posts: 1,056 Trader Rating: (3) Feedback Score: 3 reviews	No this is an 18" lip that is stepped. 4.5" 36 bolt so this is generally for Japanese wheels.. Namely Work..

03-01-2014, 11:51 PM	#20
Vqd240z Join Date: Jan 2014 Location: Htown Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	Ok so I guess they fit my Work VS-SS wheels. Hmmm I would just need rear lips. Anyone know where I could get some 5.5-7 in step lips for my Work wheels. I'm interested in this barrels if I could get other two I'm asking about

05-02-2014, 11:19 PM	#21
slide2unlock Leaky Injector Join Date: Sep 2012 Location: orlando Age: 30 Posts: 99 Trader Rating: (-1) Feedback Score: -1 reviews	sell me this i have monies

05-03-2014, 08:07 AM	#22
turbo2nr Post Whore! Join Date: Jan 2005 Location: queens NYC Age: 38 Posts: 2,561 Trader Rating: (8) Feedback Score: 8 reviews	FYI these are perfect to make stepped lip VS-MX 18" if i still had my vs-mx id be all over these! __________________ s14 kouki ka-t

05-05-2014, 11:20 AM	#23
slide2unlock Leaky Injector Join Date: Sep 2012 Location: orlando Age: 30 Posts: 99 Trader Rating: (-1) Feedback Score: -1 reviews	still hasn't responded :/

06-11-2014, 12:19 AM	#24
chris7ian Join Date: Jun 2014 Location: Bay Area, California Posts: 3 Trader Rating: (0) Feedback Score: 0 reviews	Lips still for sale?

06-12-2014, 12:56 PM	#25
paulseatingabook Zilvia Junkie Join Date: Dec 2008 Location: NJ Age: 36 Posts: 353 Trader Rating: (5) Feedback Score: 5 reviews	bump for the lols on lip size fights

01-09-2017, 06:35 PM	#26
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	bump from the grave.. never ended up selling these.. price has been edited and is firm (shipping costs me alot, canada)

03-07-2017, 09:46 PM	#27
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	bump, looking to get rid of these

03-24-2017, 10:27 PM	#28
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	Bump send me offers

03-25-2017, 06:03 PM	#29
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	bumpy bumpy

06-17-2017, 02:58 PM	#30
snags Zilvia Member Join Date: Jan 2012 Location: alberta Age: 30 Posts: 247 Trader Rating: (11) Feedback Score: 11 reviews	SOLD thanks zilvia Last edited by snags; 07-07-2017 at 10:59 PM..