CA 95 kouki drift/track car - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

dirtdiggler666 · 02-17-2009, 07:46 PM

ok i got to get rid of my car moveing and i cant take it with me.first things first just about every part on this car is brand spankin new. before i put all the turbo stuff on the car i did a compression check and it was all good. the only miles the car has really is dyno time so this is not a beat up ka-t its super fresh and ready to go. this is a track car not a street car the car has no wipers,a/c heater door glass carpet ect. on the dyno it made 240 whp and 250 torque and with the car being super light it pulls hard not like a sleepy bolt on sr. i would say if i was to keep it the only thing the car needs is rims and a cage thats it and when i say thats it im funkin not shitting you i will also throw in a helmet and a car cover.and the rims in the pic do not come with the car and no cage.and some of the pics are when i was working on the car so they are missing some things but i will get more pics up soon.

i also have a 97 nissan altima for sale with 250k and runs great and if someone buys the 240 i will sell this super cheap.

$10,000 for the 240
$11,000 for bolth

BODY:
Vented frp kouki hood
Oem kouki head lights
Jdm kouki grill
No name bumper
Version select frp sides and rear
Frp uras jspec.com wing

SUSPENSION:
Stance gr+pro coilovers
Secci tension rods
Sub frame spacers
Nismo power brace
Brand new 26mm z brakes
New front/rear pads and rotters

ENGINE/DRIVE LINE:
Ka24de with 125k
New front/rear main seal
Valve cover gasket
New oil pan gasket
New oem flywheel
New exedy stage1 clutch and pressure plate
Welded diff
Walbro 255 intake fuel pump
aluminum driveshaft

TURBO STUFF
haltech e8 ems,temp/air sensor,trim knob and boost controler
sr t25 turbo with hks wastegate
sr 370cc injectors
xs manifold
xs intercooler
stright pipe exhaust
custom 3'' down pipe
hks bov
ls1 coils
blox vac block
oil filter relocation kit

RIMS:
stock

INTERIOR:
ØBuddy club one piece seats
ØBride lo seat rails
ØSparco steering wheel
ØCrow harness
nrg quick release

dongoesby · 02-18-2009, 01:03 AM

nice kouki!!
free bump for u

what is the size spec for the rims u have in the picture?

dirtdiggler666 · 02-18-2009, 10:49 AM

thanks man

they are work cr kai's 18x9.5 +20 f&r

dirtdiggler666 · 02-19-2009, 09:58 AM

first bummmmmmmmp

dirtdiggler666 · 02-20-2009, 10:22 AM

last bump

02-17-2009, 07:46 PM	#1
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	95 kouki drift/track car ok i got to get rid of my car moveing and i cant take it with me.first things first just about every part on this car is brand spankin new. before i put all the turbo stuff on the car i did a compression check and it was all good. the only miles the car has really is dyno time so this is not a beat up ka-t its super fresh and ready to go. this is a track car not a street car the car has no wipers,a/c heater door glass carpet ect. on the dyno it made 240 whp and 250 torque and with the car being super light it pulls hard not like a sleepy bolt on sr. i would say if i was to keep it the only thing the car needs is rims and a cage thats it and when i say thats it im funkin not shitting you i will also throw in a helmet and a car cover.and the rims in the pic do not come with the car and no cage.and some of the pics are when i was working on the car so they are missing some things but i will get more pics up soon. i also have a 97 nissan altima for sale with 250k and runs great and if someone buys the 240 i will sell this super cheap. $10,000 for the 240 $11,000 for bolth BODY: Vented frp kouki hood Oem kouki head lights Jdm kouki grill No name bumper Version select frp sides and rear Frp uras jspec.com wing SUSPENSION: Stance gr+pro coilovers Secci tension rods Sub frame spacers Nismo power brace Brand new 26mm z brakes New front/rear pads and rotters ENGINE/DRIVE LINE: Ka24de with 125k New front/rear main seal Valve cover gasket New oil pan gasket New oem flywheel New exedy stage1 clutch and pressure plate Welded diff Walbro 255 intake fuel pump aluminum driveshaft TURBO STUFF haltech e8 ems,temp/air sensor,trim knob and boost controler sr t25 turbo with hks wastegate sr 370cc injectors xs manifold xs intercooler stright pipe exhaust custom 3'' down pipe hks bov ls1 coils blox vac block oil filter relocation kit RIMS: stock INTERIOR: ØBuddy club one piece seats ØBride lo seat rails ØSparco steering wheel ØCrow harness nrg quick release __________________

02-18-2009, 10:49 AM	#3
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	thanks man they are work cr kai's 18x9.5 +20 f&r __________________

02-19-2009, 09:58 AM	#4
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	first bummmmmmmmp __________________

02-20-2009, 10:22 AM	#5
dirtdiggler666 Nissanaholic! Join Date: Oct 2006 Location: p-dale Age: 44 Posts: 2,113 Trader Rating: (26) Feedback Score: 26 reviews	last bump __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-18-2009, 01:03 AM	#2
dongoesby Zilvia Addict Join Date: Mar 2007 Location: San Francisco Age: 37 Posts: 756 Trader Rating: (17) Feedback Score: 17 reviews	nice kouki!! free bump for u what is the size spec for the rims u have in the picture?