MT F/S- 1992 Toyota Aristo - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

C*bass · 12-30-2016, 06:32 PM

Want to build another rx7, so this car has to go. Mostly testing the waters for now. Its a January 1992 build year so legal stateside now. It's pretty solid for a 25 year old car, just needs a coat of paint and some repairs to the aero.

Car was tuned/Dynoed this summer. Made 500whp at 1 bar before running out of turbo. Change the turbo, make more power.

HKS 272 cams
K1 Rods
CP Pistons
Titan Timing Belt tensioner
Titan Timing gears
Gates Racing Kevlar Timing belt
Ported Oil Pump
MR-S Shimless Lifter Buckets
Supertech Dual valve springs
Custom Intake Manifold
80mm Throttle Body
AEM 3.5bar Map sensor
Custom Twin Scroll Exhaust manifold
Comp 67mm Turbo
Twin Tial MVS Wastegates
Tial Bov
Sard Fuel Rail
1000cc Injectors
OEM Gaskets
4” front mount
AEM water/meth with custom reservoir
AEM 320lph fuel pump
AP engineering Powerfc and Commander
Aeromotive FPR
Fuel Lab 82802-1 Fuel Filter
-06 Return
-08 Feed
TRUST Oil filter relocation/thermostat
-10 Oil Lines to relocation and oil cooler
Setrab P/S Cooler

R154 swap
JZZ30 Ebrake
OS Giken TS2BD(freshly rebuilt this spring)
OS movement alteration kit
Driftmotion Billet Shift forks
Marlin Crawler Thrust washer
New bearings
New Synchros
One piece driveshaft
Diff/Driveshaft Rubber Isolater delete

LS400 Front brakes with Stoptech Slotted rotors
Wilwood Pedal Box Firewall mounted
New front upper control arms
New lower ball joints
Replaced front tension arm bushings with polyurethane
Rear suspension bushings swapped to polyurethane
PBM Coilovers
Factory Torsen Diff (can include open diff axle stubs if you plan to install aftermarket lsd)
Aluminum diff mounts
Aluminum Subframe mounts
Aluminum motor mounts
Solid Tranny mount
Battery Relocation

AEM UEGO
Defi Racer Oil pressure Gauge
Apexi Water Temp Gauge
Greddy Exhaust Temp Gauge
Greddy Boost Gauge
Sparco Pro2000 Drivers Seat
Recaro Passenger seat

Rays Revolvers 18x9 +24 front 18x10 +24 rear
Dunlop Direzza Z1 Star Specs front and rear

Kazz Sport Aero

What it needs;
Better driveshaft
Body/paint
Bigger Turbo
Needs Stereo

Legal stateside January 2017

Looking to get around $18500usd Delivered within reason (thinking any state west of Texas) if you want to deal with arranging everything yourself then make an offer. Would also be interested in partial trades for clean/titled FC3S rollers, preferably with no sunroof.

Car is located near Calgary, Alberta.

http://imgur.com/a/5IRVw

Hood's popped, more pictures in album.

Sansone · 12-31-2016, 12:15 PM

This thing is super cool, glws

C*bass · 01-13-2017, 09:00 PM

Thanks, your r32 isn't too bad either.

I should also add I have a pile of spare parts to go with it (axles, rack, a/c, coilovers)

Would also consider trades for sv1000, rc51 or maybe a vstrom.

12-30-2016, 06:32 PM	#1
C*bass Join Date: Jun 2008 Location: there Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	F/S- 1992 Toyota Aristo Want to build another rx7, so this car has to go. Mostly testing the waters for now. Its a January 1992 build year so legal stateside now. It's pretty solid for a 25 year old car, just needs a coat of paint and some repairs to the aero. Car was tuned/Dynoed this summer. Made 500whp at 1 bar before running out of turbo. Change the turbo, make more power. HKS 272 cams K1 Rods CP Pistons Titan Timing Belt tensioner Titan Timing gears Gates Racing Kevlar Timing belt Ported Oil Pump MR-S Shimless Lifter Buckets Supertech Dual valve springs Custom Intake Manifold 80mm Throttle Body AEM 3.5bar Map sensor Custom Twin Scroll Exhaust manifold Comp 67mm Turbo Twin Tial MVS Wastegates Tial Bov Sard Fuel Rail 1000cc Injectors OEM Gaskets 4” front mount AEM water/meth with custom reservoir AEM 320lph fuel pump AP engineering Powerfc and Commander Aeromotive FPR Fuel Lab 82802-1 Fuel Filter -06 Return -08 Feed TRUST Oil filter relocation/thermostat -10 Oil Lines to relocation and oil cooler Setrab P/S Cooler R154 swap JZZ30 Ebrake OS Giken TS2BD(freshly rebuilt this spring) OS movement alteration kit Driftmotion Billet Shift forks Marlin Crawler Thrust washer New bearings New Synchros One piece driveshaft Diff/Driveshaft Rubber Isolater delete LS400 Front brakes with Stoptech Slotted rotors Wilwood Pedal Box Firewall mounted New front upper control arms New lower ball joints Replaced front tension arm bushings with polyurethane Rear suspension bushings swapped to polyurethane PBM Coilovers Factory Torsen Diff (can include open diff axle stubs if you plan to install aftermarket lsd) Aluminum diff mounts Aluminum Subframe mounts Aluminum motor mounts Solid Tranny mount Battery Relocation AEM UEGO Defi Racer Oil pressure Gauge Apexi Water Temp Gauge Greddy Exhaust Temp Gauge Greddy Boost Gauge Sparco Pro2000 Drivers Seat Recaro Passenger seat Rays Revolvers 18x9 +24 front 18x10 +24 rear Dunlop Direzza Z1 Star Specs front and rear Kazz Sport Aero What it needs; Better driveshaft Body/paint Bigger Turbo Needs Stereo Legal stateside January 2017 Looking to get around $18500usd Delivered within reason (thinking any state west of Texas) if you want to deal with arranging everything yourself then make an offer. Would also be interested in partial trades for clean/titled FC3S rollers, preferably with no sunroof. Car is located near Calgary, Alberta. http://imgur.com/a/5IRVw Hood's popped, more pictures in album. Last edited by Cbass; 01-13-2017 at 08:56 PM..*

12-31-2016, 12:15 PM	#2
Sansone Leaky Injector Join Date: Aug 2010 Location: Buffalo, NY Age: 35 Posts: 145 Trader Rating: (2) Feedback Score: 2 reviews	This thing is super cool, glws __________________ Life Ruiner

01-13-2017, 09:00 PM	#3
C*bass Join Date: Jun 2008 Location: there Posts: 12 Trader Rating: (0) Feedback Score: 0 reviews	Thanks, your r32 isn't too bad either. I should also add I have a pile of spare parts to go with it (axles, rack, a/c, coilovers) Would also consider trades for sv1000, rc51 or maybe a vstrom.