NY Two s14 complete part outs. Tell me what you need. Will ship all over - Page 5 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

maxgtrblue · 07-22-2018, 07:34 PM

Bump up still have tons of parts plus the new red part out. Let me know what ou need.

Sent from my iPhone using Tapatalk

maxgtrblue · 07-22-2018, 07:35 PM

Quote:

Originally Posted by Kingtal0n

I need some cheap headlights for a retrofit. Broken tabs or something is fine.

Also looking for those inner wheel well covers, the ones that go around the tire in the fender. big plastic things.

I have drivers side broken tabs ? Also do have the fender liners text me 6463727292

Sent from my iPhone using Tapatalk

maxgtrblue · 07-22-2018, 07:36 PM

Quote:

Originally Posted by Spagett

Do you have the rubber intake boot that goes from the stock intake to the throttle body? I need a few other things but if you wanna PM that works, thanks

Yes I have. Text me 6463727292

Sent from my iPhone using Tapatalk

maxgtrblue · 07-22-2018, 07:36 PM

Quote:

Originally Posted by Po_31

Do you have all the plastic tubing for the ac that are under the dash board.

Hey po I think I spoke beforeto you and forgot to respond. I can get you all the tubing now!!! Let me know. Text me 6463727292

Sent from my iPhone using Tapatalk

bavarian666 · 07-23-2018, 07:48 AM

First you sell me bent rear subframe then you tell me you will send me replacement that was in April
Nothing happen since you don’t reply you not answering!!!!
What you gone do !!!!!!!

maxgtrblue · 07-23-2018, 08:51 AM

Quote:

Originally Posted by bavarian666

First you sell me bent rear subframe then you tell me you will send me replacement that was in April
Nothing happen since you don’t reply you not answering!!!!
What you gone do !!!!!!!

I found out that I did not sell you a bent subframe. Your trying to install solid subframe bushings which requires you to be precise when removing the old bushings as well in the reinstall if you don’t line up straight it will never go on. I install energy suspension bushings which are flexible and still have me issues going back on the alignment.

Plus you emailed me months after you got the subframe to say it was bent. Doubtful.

Sent from my iPhone using Tapatalk

white1996zenki · 07-24-2018, 04:16 AM

Do you have the dust shield/ plate that goes in between the engine and transmission. Also the two brackets (gussets) that mounts to the side of the engine and the bellhousing.? These are for s14 5speed

maxgtrblue · 07-26-2018, 05:47 AM

Quote:

Originally Posted by white1996zenki

Do you have the dust shield/ plate that goes in between the engine and transmission. Also the two brackets (gussets) that mounts to the side of the engine and the bellhousing.? These are for s14 5speed

Sold to you

Sent from my iPhone using Tapatalk

Smithwick · 07-27-2018, 11:38 PM

Driver (left) side manual seatbelt buckle?

volgapower · 08-03-2018, 03:55 AM

hi how much for S14 both FLCAs and front knuckles???

maxgtrblue · 08-03-2018, 05:39 AM

Quote:

Originally Posted by volgapower

hi how much for S14 both FLCAs and front knuckles???

Pmd

Sent from my iPhone using Tapatalk

maxgtrblue · 08-09-2018, 03:35 AM

Bump this back up. Still have lots

Sent from my iPhone using Tapatalk

Down2Earth · 08-11-2018, 09:11 AM

OEM front crash bar
driver side kick panel plastic
trunk carpet
P/S rack
shipped to 43612

Pacman · 08-11-2018, 10:20 PM

Willing to tightly package and ship a hood and passenger side front fender that aren't rusty to Ohio? 45415

kerrykerrykerry · 08-13-2018, 03:13 AM

Got a mint condition ac control unit?

maxgtrblue · 08-13-2018, 03:16 AM

Quote:

Originally Posted by kerrykerrykerry

Got a mint condition ac control unit?

Pmd u

Sent from my iPhone using Tapatalk

maxgtrblue · 08-13-2018, 03:16 AM

Quote:

Originally Posted by Pacman

Willing to tightly package and ship a hood and passenger side front fender that aren't rusty to Ohio? 45415

Sorry. Can’t ship those.

Sent from my iPhone using Tapatalk

maxgtrblue · 09-08-2018, 11:17 AM

Saturday bump

Sent from my iPhone using Tapatalk

blindside73 · 09-08-2018, 03:18 PM

Looking for a radiator support.

Sent from my LG-H931 using Tapatalk

maxgtrblue · 09-08-2018, 04:09 PM

Quote:

Originally Posted by blindside73

Looking for a radiator support.

Sent from my LG-H931 using Tapatalk

Just literally sold it last weekend

Sent from my iPhone using Tapatalk

s&tcustoms · 09-10-2018, 07:05 AM

Looking for rear subframe.

smoketherear · 09-11-2018, 12:06 AM

long shot Driver side door if not rusted, and shifter trim if not destroyed

maxgtrblue · 09-11-2018, 07:17 PM

Quote:

Originally Posted by smoketherear

long shot Driver side door if not rusted, and shifter trim if not destroyed

Pmd

Sent from my iPhone using Tapatalk

maxgtrblue · 09-11-2018, 07:18 PM

Quote:

Originally Posted by s&tcustoms

Looking for rear subframe.

Text me I have another one 6463727292

Sent from my iPhone using Tapatalk

Tokyo Hippie · 09-12-2018, 10:27 AM

any luck looking for both front and rear 5 lug bearings

maxgtrblue · 09-12-2018, 02:54 PM

Quote:

Originally Posted by Tokyo Hippie

any luck looking for both front and rear 5 lug bearings

Sorry it was sold

Sent from my iPhone using Tapatalk

nrchia · 09-12-2018, 08:26 PM

Do you have a VLSD compatible driveshaft?

cadenginoplos · 09-12-2018, 09:20 PM

What condition are the front seats in

Sent from my SM-G950U using Tapatalk

maxgtrblue · 09-13-2018, 04:59 AM

Quote:

Originally Posted by nrchia

Do you have a VLSD compatible driveshaft?

No sold

Sent from my iPhone using Tapatalk

maxgtrblue · 09-13-2018, 04:59 AM

Quote:

Originally Posted by cadenginoplos

What condition are the front seats in

Sent from my SM-G950U using Tapatalk

A little moldy

Sent from my iPhone using Tapatalk

07-22-2018, 07:34 PM	#121
maxgtrblue Zilvia Addict Join Date: Mar 2013 Location: NYC Age: 42 Posts: 679 Trader Rating: (44) Feedback Score: 44 reviews	Bump up still have tons of parts plus the new red part out. Let me know what ou need. Sent from my iPhone using Tapatalk __________________ Kouki_sports240

08-09-2018, 03:35 AM	#132
maxgtrblue Zilvia Addict Join Date: Mar 2013 Location: NYC Age: 42 Posts: 679 Trader Rating: (44) Feedback Score: 44 reviews	Bump this back up. Still have lots Sent from my iPhone using Tapatalk __________________ Kouki_sports240

09-08-2018, 11:17 AM	#138
maxgtrblue Zilvia Addict Join Date: Mar 2013 Location: NYC Age: 42 Posts: 679 Trader Rating: (44) Feedback Score: 44 reviews	Saturday bump Sent from my iPhone using Tapatalk __________________ Kouki_sports240

09-12-2018, 10:27 AM	#145
Tokyo Hippie Join Date: Sep 2018 Location: Dallas, TX Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	S14 Part out any luck looking for both front and rear 5 lug bearings

07-23-2018, 07:48 AM	#125
bavarian666 Leaky Injector Join Date: Mar 2011 Location: chicago Posts: 50 Trader Rating: (1) Feedback Score: 1 reviews	First you sell me bent rear subframe then you tell me you will send me replacement that was in April Nothing happen since you don’t reply you not answering!!!! What you gone do !!!!!!!

07-24-2018, 04:16 AM	#127
white1996zenki Leaky Injector Join Date: Aug 2007 Location: nyc Posts: 101 Trader Rating: (2) Feedback Score: 2 reviews	Do you have the dust shield/ plate that goes in between the engine and transmission. Also the two brackets (gussets) that mounts to the side of the engine and the bellhousing.? These are for s14 5speed

07-27-2018, 11:38 PM	#129
Smithwick Leaky Injector Join Date: Dec 2012 Location: Boston Posts: 135 Trader Rating: (5) Feedback Score: 5 reviews	Driver (left) side manual seatbelt buckle?

08-03-2018, 03:55 AM	#130
volgapower Leaky Injector Join Date: Oct 2013 Location: Georgia, Tbilisi Posts: 61 Trader Rating: (0) Feedback Score: 0 reviews	hi how much for S14 both FLCAs and front knuckles???

08-11-2018, 09:11 AM	#133
Down2Earth Leaky Injector Join Date: Jan 2016 Location: Toledo, Ohio Age: 27 Posts: 90 Trader Rating: (3) Feedback Score: 3 reviews	OEM front crash bar driver side kick panel plastic trunk carpet P/S rack shipped to 43612

08-11-2018, 10:20 PM	#134
Pacman Zilvia FREAK! Join Date: Sep 2003 Location: Ohio Age: 36 Posts: 1,149 Trader Rating: (1) Feedback Score: 1 reviews	Willing to tightly package and ship a hood and passenger side front fender that aren't rusty to Ohio? 45415

08-13-2018, 03:13 AM	#135
kerrykerrykerry Leaky Injector Join Date: Jan 2013 Location: raleigh Age: 37 Posts: 142 Trader Rating: (4) Feedback Score: 4 reviews	Got a mint condition ac control unit?

09-08-2018, 03:18 PM	#139
blindside73 Join Date: May 2018 Location: San Diego Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Looking for a radiator support. Sent from my LG-H931 using Tapatalk

09-10-2018, 07:05 AM	#141
s&tcustoms Join Date: Apr 2014 Location: Upstate NY Age: 29 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	Looking for rear subframe.

09-11-2018, 12:06 AM	#142
smoketherear Zilvia Member Join Date: Jun 2012 Location: Queens N.y Age: 32 Posts: 181 Trader Rating: (1) Feedback Score: 1 reviews	long shot Driver side door if not rusted, and shifter trim if not destroyed

09-12-2018, 08:26 PM	#147
nrchia Join Date: Apr 2011 Location: NJ Age: 33 Posts: 24 Trader Rating: (0) Feedback Score: 0 reviews	Do you have a VLSD compatible driveshaft?

09-12-2018, 09:20 PM	#148
cadenginoplos Join Date: May 2018 Location: US Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	What condition are the front seats in Sent from my SM-G950U using Tapatalk