Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat

Chat General Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 07-17-2016, 09:29 AM   #91
Nismoboy1992
Leaky Injector
 
Join Date: Aug 2013
Location: Louisville
Posts: 118
Trader Rating: (3)
Nismoboy1992 is an unknown quantity at this point
Feedback Score: 3 reviews
Hey guys, wondering if you have some insight on this. I am currently doing this 350z trans swap on my ka-t. I literally got everything in and then the starter doesnt fit... I am using the autotech motoring ka to 350z trans adapter plate. The starter hits up against the 350z bellhousing... I took apart a ka starter and used the starter gear as reference and it looked like a whole section of the bellhousing needed to be cut out! idk if the other adapter plates have this problem. The autotech motoring website didn't say anything about it.
Nismoboy1992 is offline   Reply With Quote
Sponsored Links
Old 07-17-2016, 10:26 AM   #92
roninwon
Zilvia Junkie
 
roninwon's Avatar
 
Join Date: Sep 2008
Location: Nampa, ID
Age: 37
Posts: 557
Trader Rating: (7)
roninwon is an unknown quantity at this point
Feedback Score: 7 reviews
Send a message via MSN to roninwon Send a message via Yahoo to roninwon
From what I heard you're suppose to notch the starter with a grinder or dremel
__________________
roninwon is offline   Reply With Quote
Old 07-17-2016, 10:39 AM   #93
Nismoboy1992
Leaky Injector
 
Join Date: Aug 2013
Location: Louisville
Posts: 118
Trader Rating: (3)
Nismoboy1992 is an unknown quantity at this point
Feedback Score: 3 reviews
Quote:
Originally Posted by roninwon View Post
From what I heard you're suppose to notch the starter with a grinder or dremel
Do you know which part of the starter to notch? If I can notch the starter, I'd much much much rather do that. I sure as hell do not want to pull this transmission back out lol.
Nismoboy1992 is offline   Reply With Quote
Old 07-17-2016, 11:19 AM   #94
EDacIouSX
Post Whore!
 
EDacIouSX's Avatar
 
Join Date: Nov 2004
Location: Los Angeles
Age: 38
Posts: 4,564
Trader Rating: (53)
EDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfectionEDacIouSX is close to perfection
Feedback Score: 53 reviews
Send a message via ICQ to EDacIouSX Send a message via AIM to EDacIouSX Send a message via MSN to EDacIouSX Send a message via Yahoo to EDacIouSX
Pretty awesome thread, great amount of information here. Thanks to everyone that contributed!
EDacIouSX is offline   Reply With Quote
Old 07-18-2016, 11:54 AM   #95
S-Verteen
Leaky Injector
 
Join Date: Jun 2013
Location: Quad Cities
Posts: 96
Trader Rating: (0)
S-Verteen is an unknown quantity at this point
Feedback Score: 0 reviews
Nismoboy92 for my kat cd swap with the Collins adapter I've found clearance on the starter itself isn't sufficient. This lead to me opening the housing where the cone hits 3/4 to 1".
S-Verteen is offline   Reply With Quote
Old 07-18-2016, 12:40 PM   #96
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Quote:
Originally Posted by Joobie View Post
I'm personally using a CD001 transmission out of a v35 Skyline that has been upgraded with the CD009 synchros and throwout fork/pivot. Managed to get it cheap because of the number written on the side. The donor car had 60,000kms (40,000miles) when it was written off, and the internals look brand new (I was informed that the gearbox was rebuilt with the update kit not long before the car was crashed).

You cannot install a CD009 synchro set into a non CD009 transmission. It does not fit. I don't know what this "update kit" is that you're talking about but that trans was most likely rebuilt with the regular synchro set it came with. I asked the owner at Extreme Auto Concepts in Phoenix about this and they specialize in 350z's, he said he tried it before and the parts just won't work.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 07-21-2016, 10:07 AM   #97
roninwon
Zilvia Junkie
 
roninwon's Avatar
 
Join Date: Sep 2008
Location: Nampa, ID
Age: 37
Posts: 557
Trader Rating: (7)
roninwon is an unknown quantity at this point
Feedback Score: 7 reviews
Send a message via MSN to roninwon Send a message via Yahoo to roninwon
Alright guys. Talked to Jason over at cbfperformance today and there is still 44 rear mount shifters available for $185. Let's help out a small business and buy quality American parts!
Currently on sale for a group buy at $185
http://www.cbfperformance.net/store#...egory=19722030
__________________
roninwon is offline   Reply With Quote
Old 07-21-2016, 10:11 AM   #98
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
So anybody have a working speedo yet with the cd009 swap? I'm debating over which route to take on this.


I should be able to run a front abs knuckle sensor to get a speed signal from it.


Also LOJ offers a speed sensor kit that goes on the front yoke of the driveshaft, however at $300 it's a bit pricey.


This brings the question, better to pull speed from the rear/driven wheels or from the front wheels?
In the grand scheme it's best to have BOTH so that you can take advantage of traction control if your ecu supports it...


I'm leaning towards the driven wheels since that's how a regular s13 speed signal is pulled... But that's the most expensive route too.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 07-21-2016, 10:17 AM   #99
brndck
Premium Member
 
brndck's Avatar
 
Join Date: Jun 2003
Location: torrance, ca
Age: 42
Posts: 12,684
Trader Rating: (130)
brndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfectionbrndck is close to perfection
Feedback Score: 130 reviews
Send a message via AIM to brndck
/\/\/\/\ I plan on using this, but I have a stack cluster, may or may not work with oem
http://www.autometer.com/gps-ground-...se-output.html
__________________

http://outslidersandsmokeproduce.blogspot.com/
Quote:
Originally Posted by Mannykiller View Post
it'll fit JANK.. and no one likes Jank except Broke ass zilvians.
brndck is offline   Reply With Quote
Old 07-21-2016, 10:43 AM   #100
Nissansota240
Zilvia FREAK!
 
Nissansota240's Avatar
 
Join Date: Mar 2011
Location: Land of Purple Rain
Posts: 1,255
Trader Rating: (21)
Nissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really nice
Feedback Score: 21 reviews
I'm attempting to use what I posted in the last page, hopefully wiring it up this weekend. Otherwise if I don't have time, at some point after SSC I'll get it figured out.
__________________
DLG - DIRTYLOVE
Nissansota240 is offline   Reply With Quote
Old 07-21-2016, 02:16 PM   #101
Joobie610
Leaky Injector
 
Joobie610's Avatar
 
Join Date: Apr 2015
Location: Qld, Australia
Posts: 82
Trader Rating: (0)
Joobie610 is making a name for him/her selfJoobie610 is making a name for him/her self
Feedback Score: 0 reviews
Quote:
Originally Posted by TheRealSy90 View Post
You cannot install a CD009 synchro set into a non CD009 transmission. It does not fit. I don't know what this "update kit" is that you're talking about but that trans was most likely rebuilt with the regular synchro set it came with. I asked the owner at Extreme Auto Concepts in Phoenix about this and they specialize in 350z's, he said he tried it before and the parts just won't work.
Like I said, I was informed that it was rebuilt this way, i didn't do the work or have it done. I would imagine that was the explanation given to the previous owner by whoever rebuilt it.

If someone else has tried it and it doesn't work, educated guess would be the cd001 rebuild kit has revised parts that mimic the Cd009 kit, strengthening it to withstand the same/similar punishment.

Sent from my E6653 using Tapatalk
__________________
Joobie610 is offline   Reply With Quote
Old 07-21-2016, 04:24 PM   #102
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Haha anyways good luck with that 001.


Looking forward to seeing who gets their speedo's working.


Supposedly the AEM Infinity ecu might be able to convert a speed signal thus eliminating the need for the Dakotah converter, but I haven't figured this out yet for sure as I'm waiting for mine to come in.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 07-22-2016, 05:41 AM   #103
SidewayzAsFck
Zilvia Junkie
 
Join Date: May 2012
Location: Jersey
Posts: 479
Trader Rating: (16)
SidewayzAsFck can only hope to improve
Feedback Score: 16 reviews
So I am picking up a cd009 this week for my sr20det build. After doing some looking around I am between the CBF performance shifter bracket and the gktech unit + trans mount. Anyone able to give some feed back on the two units (from personal use)? I just want I make sure that both units actually place the shifter in the correct location for a s14 chassis as stated by the manifacturers. I also have the autotech adaptor plate and a s13 sr20det
SidewayzAsFck is offline   Reply With Quote
Old 07-22-2016, 08:16 AM   #104
roninwon
Zilvia Junkie
 
roninwon's Avatar
 
Join Date: Sep 2008
Location: Nampa, ID
Age: 37
Posts: 557
Trader Rating: (7)
roninwon is an unknown quantity at this point
Feedback Score: 7 reviews
Send a message via MSN to roninwon Send a message via Yahoo to roninwon
Quote:
Originally Posted by SidewayzAsFck View Post
So I am picking up a cd009 this week for my sr20det build. After doing some looking around I am between the CBF performance shifter bracket and the gktech unit + trans mount. Anyone able to give some feed back on the two units (from personal use)? I just want I make sure that both units actually place the shifter in the correct location for a s14 chassis as stated by the manifacturers. I also have the autotech adaptor plate and a s13 sr20det
Several people have bought cbfperformance rear mount shifter and it fits perfectly in s chassis. The gktech one was built specifically for s chassis. I'm going with CBF cause it looks beefy compared to the gk one.

I also have the xcessive trans mount and i am very happy with the quality
__________________
roninwon is offline   Reply With Quote
Old 07-22-2016, 08:37 AM   #105
Kylepaschke
Leaky Injector
 
Join Date: Oct 2006
Location: Minnesota
Posts: 149
Trader Rating: (13)
Kylepaschke is an unknown quantity at this point
Feedback Score: 13 reviews
I am using the CBF shifter and it works out really well. Its also 100% made in America so I personally value that. I also have had a great experience dealing with Jason, the owner of CBF; throughout the entire process
Kylepaschke is offline   Reply With Quote
Old 07-22-2016, 09:57 AM   #106
Yellow4g63
Zilvia FREAK!
 
Join Date: Jan 2003
Location: Socal
Posts: 1,454
Trader Rating: (5)
Yellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of lightYellow4g63 is a glorious beacon of light
Feedback Score: 5 reviews
Send a message via AIM to Yellow4g63
I got the gtech unit. It's at the post office tho need to go fetch it soon.
__________________

95 240sx RB20 415whp
91 Nx2000 VVL yo
Yellow4g63 is offline   Reply With Quote
Old 08-01-2016, 10:40 AM   #107
Nissansota240
Zilvia FREAK!
 
Nissansota240's Avatar
 
Join Date: Mar 2011
Location: Land of Purple Rain
Posts: 1,255
Trader Rating: (21)
Nissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really nice
Feedback Score: 21 reviews
Quote:
Originally Posted by TheRealSy90 View Post
Haha anyways good luck with that 001.


Looking forward to seeing who gets their speedo's working.


Supposedly the AEM Infinity ecu might be able to convert a speed signal thus eliminating the need for the Dakotah converter, but I haven't figured this out yet for sure as I'm waiting for mine to come in.
Got a perfectly working speedo, will do a lil write up later this week .

Sent from my SCH-I545 using Tapatalk
__________________
DLG - DIRTYLOVE
Nissansota240 is offline   Reply With Quote
Old 08-01-2016, 11:22 AM   #108
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Got the Gktech shifter myself. Really cool piece.


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-01-2016, 12:01 PM   #109
EnvisionMore
Leaky Injector
 
Join Date: Apr 2015
Location: San Antonio, TX
Posts: 61
Trader Rating: (0)
EnvisionMore is an unknown quantity at this point
Feedback Score: 0 reviews
Any more info on shifter relocation kits using a 2J/1J engine? Not many people out there running the setup
EnvisionMore is offline   Reply With Quote
Old 08-01-2016, 12:06 PM   #110
RickS14
Zilvia Member
 
RickS14's Avatar
 
Join Date: Oct 2012
Location: CLEVELAND
Posts: 218
Trader Rating: (2)
RickS14 is an unknown quantity at this point
Feedback Score: 2 reviews
The everything cd009 swap thread.

It's gonna be off. But I think it if you cut the shifter and bend it forward you could get it in stock location under the boot trim and centered. Check out the 2jz swap thread someone has posted pics already. As fas as the gktech one goes.


Sent from my iPhone using Tapatalk
RickS14 is offline   Reply With Quote
Old 08-01-2016, 12:08 PM   #111
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
The everything cd009 swap thread.

CBF has shifters that work for 1j/2j Cd setups that are further forward than the Sr/Cd shifter.


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-01-2016, 12:09 PM   #112
Freddy
Zilvia Junkie
 
Freddy's Avatar
 
Join Date: Oct 2008
Location: Ottawa, Canada
Age: 34
Posts: 568
Trader Rating: (2)
Freddy is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by EnvisionMore View Post
Any more info on shifter relocation kits using a 2J/1J engine? Not many people out there running the setup
Check out Serial Nine pretty sure they once


How much do CD009 got for states side?
Freddy is offline   Reply With Quote
Old 08-01-2016, 01:41 PM   #113
Nissansota240
Zilvia FREAK!
 
Nissansota240's Avatar
 
Join Date: Mar 2011
Location: Land of Purple Rain
Posts: 1,255
Trader Rating: (21)
Nissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really niceNissansota240 is just really nice
Feedback Score: 21 reviews




Sent from my SCH-I545 using Tapatalk
__________________
DLG - DIRTYLOVE
Nissansota240 is offline   Reply With Quote
Old 08-01-2016, 01:57 PM   #114
RickS14
Zilvia Member
 
RickS14's Avatar
 
Join Date: Oct 2012
Location: CLEVELAND
Posts: 218
Trader Rating: (2)
RickS14 is an unknown quantity at this point
Feedback Score: 2 reviews
The everything cd009 swap thread.

$450.00 for the shifter they offer.



Sent from my iPhone using Tapatalk
RickS14 is offline   Reply With Quote
Old 08-01-2016, 02:00 PM   #115
RickS14
Zilvia Member
 
RickS14's Avatar
 
Join Date: Oct 2012
Location: CLEVELAND
Posts: 218
Trader Rating: (2)
RickS14 is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by Nissansota240 View Post




Sent from my SCH-I545 using Tapatalk


Wonder if you can just modify and cut the shifter to make it sit forward.


Sent from my iPhone using Tapatalk
RickS14 is offline   Reply With Quote
Old 08-01-2016, 02:28 PM   #116
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Better off with the CBF shifter for a Jz setup they have two different ones that are both further forward than the Gktech.


Sent from my iPhone using Tapatalk
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-01-2016, 03:03 PM   #117
RickS14
Zilvia Member
 
RickS14's Avatar
 
Join Date: Oct 2012
Location: CLEVELAND
Posts: 218
Trader Rating: (2)
RickS14 is an unknown quantity at this point
Feedback Score: 2 reviews
I would like the input on the cbf.wonder how the throws feel also from left to right. Seems like gktech took a while to release what they offer because they did a fair amount of real world use. Plus the unit looks pretty solid.cbf doesn't seem to have any lower support like serial nine and gktech shifters do. I'm a doing a 2j s14. I'm really thinking about keeping my gktech and just modify the shifter.


Sent from my iPhone using Tapatalk
RickS14 is offline   Reply With Quote
Old 08-01-2016, 03:26 PM   #118
Mister.E
Post Whore!
 
Mister.E's Avatar
 
Join Date: Oct 2007
Location: Las Vegas
Age: 39
Posts: 4,590
Trader Rating: (53)
Mister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond reputeMister.E has a reputation beyond repute
Feedback Score: 53 reviews
Serial N9ne has the most versatile shifter option out there. Multiple configurations in one unit.
__________________
https://instagram.com/e_lemonation/: @e_lemonation
Mister.E is offline   Reply With Quote
Old 08-01-2016, 04:42 PM   #119
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Yeah the Serial 9 shifter reminds me a lot of the K-Tuned D series shifter I had on my old ef civic. Adjustable in many positions. Was a rad piece.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-01-2016, 05:29 PM   #120
MattTenFour
 
Join Date: Jan 2016
Location: Holly Springs, NC
Age: 38
Posts: 17
Trader Rating: (1)
MattTenFour is an unknown quantity at this point
Feedback Score: 1 reviews
I bolted my Collins adapter to the SR this weekend and I'm a little confused about something. Collins instructions say to grind down the starter to allow clearance for the transmission housing. I've seen pictures of other people's swaps and I'm familiar with what is required. I was able to bolt my starter up without any modifications and it appears that it will work just fine. I shared some pictures with a buddy that has an older Collins adapter and its clear that the new plate is designed differently. Has anyone else used one of the recently released Collins SR to CD009 adapters that can confirm if that is correct? Collins wont reply to my emails or texts.
MattTenFour is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:35 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net