Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Chat > Builds (and builds only)

Builds (and builds only) Got a build thread? It goes here, build threads anywhere else on the forum will be locked and never moved.


Reply
 
Thread Tools Display Modes
Old 04-06-2013, 11:26 AM   #1
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
A Poor Man's Dream S13 (VQ, big angle, etc)

So I have a very long build thread in the premium section and on a few other sites that includes all my car history and whatnot, but I figured I'd keep it short and sweet in this section of Zilvia and just show you what I'm working on now.

I purchased this car a couple years ago with the intention of saving it from a lifetime of hackdom at the hands of the "car guys" up here in Michigan. Also, a rust free shell is very hard to come by, and this was one of the cleanest (underneath) I'd seen. So I bought this for $700.







I cannot tell you how botched the R33 conversion was, or how much of the wiring had been hacked up, etc, etc, etc. The more I got into this thing the more I realized it was going to need a total restoration.

So I started pulling it all apart. I'll save you from having to look at all the pictures of the deconstruction process and get straight to the good stuff.

I started working at a shop called Strictly Import Motorsports, where they convinced me that this car needed a RWD 4G63 swap. The plan was to stick a stock block DSM engine in with a twin-scoll HX35 setup and call it a day. Let's just say things got a little off track.







And I ended up with a forged 2.3liter stroker that I still needed a LOT of money to get in the car and running the way I wanted it.

So unfortunately, I have abandoned that route.

In comes this:



And this:



So I finally got the thing torn down and was ready to start the build up. So another shopping spree was in order:





Powdercoated:













And I bought a set of old Kei-office coils to get started on.

Extended my LCA's 25mm (need to redo).



So then I did this:







Scuffed the entire interior and painted it with white epoxy (messy stuff).



So here's how it sits right now.





A lot more to come, very soon.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Sponsored Links
Old 04-15-2013, 12:39 PM   #2
Tank_4g63
 
Join Date: Mar 2013
Location: Huntsville AL
Age: 36
Posts: 45
Trader Rating: (0)
Tank_4g63 is an unknown quantity at this point
Feedback Score: 0 reviews
Too bad you didn't stick with the 4g route. I know of SIM, good guys. I have bought many a part from them for the Talon.

I'd like to eventually have a 4g63 powered 240 myself.
__________________
1992 Talon TSi - DD/Weekend Drag car
1993 240sx - Jackstand Balla
Tank_4g63 is offline   Reply With Quote
Old 04-15-2013, 02:06 PM   #3
gbaby2089
Zilvia Addict
 
gbaby2089's Avatar
 
Join Date: Oct 2010
Location: WI
Posts: 833
Trader Rating: (0)
gbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfection
Feedback Score: 0 reviews
A bajillion dollars on drivetrain stuff and you bought XXR's and old ass Kei Office coils?

Yo sig and yo purchases don't line up y0
gbaby2089 is offline   Reply With Quote
Old 04-15-2013, 02:31 PM   #4
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by gbaby2089 View Post
A bajillion dollars on drivetrain stuff and you bought XXR's and old ass Kei Office coils?

Yo sig and yo purchases don't line up y0
Haha a man's gotta eat. XXR's aren't knock offs, and the Kei-offices are stand in's until I can buy some FEAL's.
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-15-2013, 02:37 PM   #5
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
My buddy does powdercoating, so we threw a coat over the matte black, we'll see if it sticks long term...





__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-15-2013, 02:48 PM   #6
gbaby2089
Zilvia Addict
 
gbaby2089's Avatar
 
Join Date: Oct 2010
Location: WI
Posts: 833
Trader Rating: (0)
gbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfectiongbaby2089 is close to perfection
Feedback Score: 0 reviews
Quote:
Originally Posted by PoorMans180SX View Post
Haha a man's gotta eat. XXR's aren't knock offs, and the Kei-offices are stand in's until I can buy some FEAL's.
Those are replica Weds TC105N.

Back to your thread.
gbaby2089 is offline   Reply With Quote
Old 04-15-2013, 03:06 PM   #7
gretz
Leaky Injector
 
gretz's Avatar
 
Join Date: Apr 2008
Location: Alberta
Age: 38
Posts: 148
Trader Rating: (1)
gretz is a jewel in the roughgretz is a jewel in the roughgretz is a jewel in the roughgretz is a jewel in the roughgretz is a jewel in the roughgretz is a jewel in the roughgretz is a jewel in the rough
Feedback Score: 1 reviews
Quote:
Originally Posted by gbaby2089 View Post
Those are replica Weds TC105N.

Back to your thread.
A 10 spoke vs. a split 5? If you say so lol...

Awesome build, was looking forward to your compound 4g63
gretz is offline   Reply With Quote
Old 04-15-2013, 03:09 PM   #8
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
I'm sorry, but it's a pretty horrible replica if it is, nothing like Rota's direct copies.



__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-15-2013, 03:19 PM   #9
240boi115
Zilvia FREAK!
 
240boi115's Avatar
 
Join Date: Sep 2012
Location: Torrance
Age: 31
Posts: 1,497
Trader Rating: (6)
240boi115 is an unknown quantity at this point
Feedback Score: 6 reviews
that front end threw me off so bad i thought you were working on an s14... i had to scroll back up to the top to look again and see it was a hatch... lmao seems to be going well slowly but surely... my hatch is just sitting in my driveway till i get more moola
-__-
240boi115 is offline   Reply With Quote
Old 04-15-2013, 03:25 PM   #10
Big Zee
Zilvia Addict
 
Big Zee's Avatar
 
Join Date: Oct 2005
Location: BC
Age: 39
Posts: 860
Trader Rating: (10)
Big Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choicesBig Zee has made poor choices
Feedback Score: 10 reviews
Send a message via MSN to Big Zee
who cares if hes using XXR's. he had a insane TT set on a 4G63 that most all of Zilvia wouldn't have even tried.

Poormans180SX, please continue on with your thread, I'm loving what youve done so far and would really like to see how it progresses to the finished product.
__________________
Two-Tone owner#011509-Lightly Modded
Big Zee is offline   Reply With Quote
Old 04-15-2013, 03:50 PM   #11
conrad_s13.5
Zilvia FREAK!
 
conrad_s13.5's Avatar
 
Join Date: Jan 2009
Location: STL
Age: 36
Posts: 1,533
Trader Rating: (6)
conrad_s13.5 is making a name for him/her selfconrad_s13.5 is making a name for him/her self
Feedback Score: 6 reviews
watchin dis mang
__________________
cONtRol FReAkS
conrad_s13.5 is offline   Reply With Quote
Old 04-15-2013, 10:49 PM   #12
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by 240boi115 View Post
that front end threw me off so bad i thought you were working on an s14... i had to scroll back up to the top to look again and see it was a hatch... lmao seems to be going well slowly but surely... my hatch is just sitting in my driveway till i get more moola
-__-
Haha yeah it was pretty horrible.

Quote:
Originally Posted by Big Zee View Post
who cares if hes using XXR's. he had a insane TT set on a 4G63 that most all of Zilvia wouldn't have even tried.

Poormans180SX, please continue on with your thread, I'm loving what youve done so far and would really like to see how it progresses to the finished product.
Thanks for the kind words man!

Quote:
Originally Posted by conrad_s13.5 View Post
watchin dis mang
Cool thanks!

Quote:
Originally Posted by Tank_4g63 View Post
Too bad you didn't stick with the 4g route. I know of SIM, good guys. I have bought many a part from them for the Talon.

I'd like to eventually have a 4g63 powered 240 myself.
Yeah man, I'd still like to do it for kicks and gigs someday.

Today I cleaned up the VQ:



Made Swiss cheese out of these cheapo mounts I got second hand:





Installed an old ForcedFab steering column bushing I've had since like 2007, and Joe powdercoated my intake manifold, so we installed it.



__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-15-2013, 10:51 PM   #13
godrifttoday
Post Whore!
 
godrifttoday's Avatar
 
Join Date: Jan 2004
Location: los angeles
Age: 40
Posts: 3,120
Trader Rating: (82)
godrifttoday is an unknown quantity at this point
Feedback Score: 82 reviews
im going to have to send u a bolt kit!
__________________
NEED Bolt kits for your car?
http://i48.tinypic.com/6gx5e0.jpg
godrifttoday is offline   Reply With Quote
Old 04-15-2013, 10:54 PM   #14
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by godrifttoday View Post
im going to have to send u a bolt kit!
I'm down for that!
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-15-2013, 10:57 PM   #15
240boi115
Zilvia FREAK!
 
240boi115's Avatar
 
Join Date: Sep 2012
Location: Torrance
Age: 31
Posts: 1,497
Trader Rating: (6)
240boi115 is an unknown quantity at this point
Feedback Score: 6 reviews
maaan cant wait to see the vq sitting in the bay.. whoooo!!!
240boi115 is offline   Reply With Quote
Old 04-15-2013, 11:55 PM   #16
StryfeS13
It's Always Broken.
 
StryfeS13's Avatar
 
Join Date: Feb 2010
Location: Fresno, CA
Posts: 1,363
Trader Rating: (14)
StryfeS13 is an unknown quantity at this point
Feedback Score: 14 reviews
Sweet thread man. Would have been super interesting and sick with that 4G63 but I'm equally excited for the VQ. Nice!
__________________
Quote:
Originally Posted by KoukiMonsta
once its done you can drive it off a fucking cliff for making such a fucking stupid thread.
Gotta love Zilvia.
StryfeS13 is offline   Reply With Quote
Old 04-18-2013, 10:32 AM   #17
05subysti
Zilvia Addict
 
Join Date: Jul 2012
Location: TX
Posts: 601
Trader Rating: (3)
05subysti is an unknown quantity at this point
Feedback Score: 3 reviews
dammnn you shouldve stuck with the 4g63 tt! it wouldve been awesome. VQ is cool tho.
05subysti is offline   Reply With Quote
Old 04-18-2013, 05:36 PM   #18
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by 240boi115 View Post
maaan cant wait to see the vq sitting in the bay.. whoooo!!!
Thanks man, me too!

Quote:
Originally Posted by StryfeS13 View Post
Sweet thread man. Would have been super interesting and sick with that 4G63 but I'm equally excited for the VQ. Nice!
Quote:
Originally Posted by 05subysti View Post
dammnn you shouldve stuck with the 4g63 tt! it wouldve been awesome. VQ is cool tho.
Yeah, I was really excited for the compound setup, but with the way I like to do things, it was just wayyyy too expensive to complete. I'd still like to do it someday, we shall see.

Put some of my under dash and whatnot back in today. Gutted the AC box so I can still have a blower. Just waiting on some flywheel and bellhousing bolts to come in and I can the VQ in the bay!



__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-21-2013, 06:19 AM   #19
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Got this Grade 10.9 bellhousing/starter bolt kit from Godrifttoday. So nice to have new hardware to work with, and everything was perfect length!



Bolted it up and slid it in and out a few times, only to find I needed to take the exhaust manifold off haha. So we wrapped it around the intake and finally got it in!





__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-21-2013, 07:09 AM   #20
pigeon
Leaky Injector
 
Join Date: Oct 2008
Location: Northern VA
Age: 35
Posts: 84
Trader Rating: (9)
pigeon is an unknown quantity at this point
Feedback Score: 9 reviews
What are you planning for your steering/knuckles/roll center correction? Sweet build, needs some long tubes and straight pipes on that VQ. Only way to go
pigeon is offline   Reply With Quote
Old 04-21-2013, 07:38 AM   #21
LMFC
Leaky Injector
 
LMFC's Avatar
 
Join Date: Nov 2012
Location: Michigan
Age: 34
Posts: 139
Trader Rating: (1)
LMFC is an unknown quantity at this point
Feedback Score: 1 reviews
Cody Reeser had mentioned your car to me a few times. Keep up the progress!
LMFC is offline   Reply With Quote
Old 04-21-2013, 04:02 PM   #22
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by pigeon View Post
What are you planning for your steering/knuckles/roll center correction? Sweet build, needs some long tubes and straight pipes on that VQ. Only way to go
Yes, I will probably make a set of longtubes at some point

I'll be ordering this within the next few weeks:



Quote:
Originally Posted by LMFC View Post
Cody Reeser had mentioned your car to me a few times. Keep up the progress!
Right on man, are you Levi with the red S14? If so your KA is still going strong in my old coupe!
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-21-2013, 05:19 PM   #23
future
Post Whore!
 
future's Avatar
 
Join Date: Dec 2010
Location: SoCal 909
Age: 31
Posts: 4,743
Trader Rating: (42)
future is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to allfuture is a name known to all
Feedback Score: 42 reviews
Why did you ditch the old plans? That set up looked insane!
__________________
Quote:
Originally Posted by tacobellman_2007 View Post
No because I don't want to do another 5 lug conversion.
future is offline   Reply With Quote
Old 04-21-2013, 05:29 PM   #24
LMFC
Leaky Injector
 
LMFC's Avatar
 
Join Date: Nov 2012
Location: Michigan
Age: 34
Posts: 139
Trader Rating: (1)
LMFC is an unknown quantity at this point
Feedback Score: 1 reviews
Quote:
Originally Posted by PoorMans180SX View Post
Right on man, are you Levi with the red S14? If so your KA is still going strong in my old coupe!
Yep, that's me. Good to hear, my swap is nearing completion ready to drive this beast.
LMFC is offline   Reply With Quote
Old 04-21-2013, 05:41 PM   #25
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by future View Post
Why did you ditch the old plans? That set up looked insane!
Haha it was going to be insane! But I still needed wastegates, a bov, intercooler, piping, couplers, injectors, engine management, etc, etc. it just was too expensive and I need to get on track and actually drive. I've always believed in suspension before power anyway
__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-21-2013, 09:15 PM   #26
godrifttoday
Post Whore!
 
godrifttoday's Avatar
 
Join Date: Jan 2004
Location: los angeles
Age: 40
Posts: 3,120
Trader Rating: (82)
godrifttoday is an unknown quantity at this point
Feedback Score: 82 reviews
I'm glad the bolts fit !
__________________
NEED Bolt kits for your car?
http://i48.tinypic.com/6gx5e0.jpg
godrifttoday is offline   Reply With Quote
Old 04-22-2013, 08:09 PM   #27
PoorMans180SX
Zilvia.net Advertiser
 
PoorMans180SX's Avatar
 
Join Date: Nov 2005
Location: Michigan
Age: 36
Posts: 5,573
Trader Rating: (16)
PoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfectionPoorMans180SX is close to perfection
Feedback Score: 16 reviews
Send a message via AIM to PoorMans180SX
Quote:
Originally Posted by godrifttoday View Post
I'm glad the bolts fit !
Same here!

I put my cheapo intake on today, along with my exhaust manifolds. Also installed my 350Z throttle pedal and got my clutch pedal in the mail, but forgot to take pictures of those...

__________________
Build: http://zilvia.net/f/showthread.php?t=643065

Friends don't let friends buy knock-offs.
PoorMans180SX is offline   Reply With Quote
Old 04-23-2013, 10:49 PM   #28
Sansone
Leaky Injector
 
Join Date: Aug 2010
Location: Buffalo, NY
Age: 35
Posts: 145
Trader Rating: (2)
Sansone is an unknown quantity at this point
Feedback Score: 2 reviews
Looking good! That 4g63 setup looked wild! That would have been interesting to see. Makes me miss my Evo lol.
__________________

Life Ruiner
Sansone is offline   Reply With Quote
Old 04-24-2013, 10:56 AM   #29
bc.
Zilvia Addict
 
bc.'s Avatar
 
Join Date: Aug 2010
Location: St. Louis
Posts: 868
Trader Rating: (0)
bc. is an unknown quantity at this point
Feedback Score: 0 reviews
This looks good, real good.
__________________
* S14SR22 * 9.0 c/r * GT3071R *
bc. is offline   Reply With Quote
Old 04-26-2013, 04:23 PM   #30
Motary
Zilvia Junkie
 
Motary's Avatar
 
Join Date: Nov 2007
Location: Estonia
Age: 35
Posts: 450
Trader Rating: (2)
Motary is making a name for him/her selfMotary is making a name for him/her self
Feedback Score: 2 reviews
Send a message via MSN to Motary
Nice to see your build finally here! What made you decide on the TDP kit instead i.e Wisefab or Driftworks? Is it the adjustability?
Motary is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:33 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net