Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 02-11-2017, 10:18 PM   #1
apex128
Leaky Injector
 
Join Date: Jul 2016
Location: Chicago suburbs
Posts: 78
Trader Rating: (0)
apex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enough
Feedback Score: 0 reviews
s14 Crank Angle Sensor Confusion

Hello everyone,

I have an s13 transmission on my s14. There is no place for me to put a crank position sensor on the bellhousing. I know that this sensor is not needed for engine operation and am trying to get rid of the trouble code. How do I bypass the sensor? Can I use a resistor? Also, I deleted my egr and want to get rid of that code too. Can I use a resistor for that?

Thanks,
Evan
apex128 is offline   Reply With Quote
Sponsored Links
Old 02-16-2017, 09:05 AM   #2
apex128
Leaky Injector
 
Join Date: Jul 2016
Location: Chicago suburbs
Posts: 78
Trader Rating: (0)
apex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enough
Feedback Score: 0 reviews
Bump. I need help on this guys.
apex128 is offline   Reply With Quote
Old 02-16-2017, 09:52 AM   #3
s13silvia123
Post Whore!
 
s13silvia123's Avatar
 
Join Date: May 2006
Location: where waldo is
Age: 36
Posts: 3,005
Trader Rating: (11)
s13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfections13silvia123 is close to perfection
Feedback Score: 11 reviews
Measure, drill and tap hole to make it work on the bell housing. but that's me and i would of done it when i have the tranny out.
__________________
18g and 20g turbo users click on me
http://zilvia.net/f/tech-talk/261219-18g-20g-turbo-users.html

s13silvia123 is offline   Reply With Quote
Old 02-16-2017, 12:07 PM   #4
apex128
Leaky Injector
 
Join Date: Jul 2016
Location: Chicago suburbs
Posts: 78
Trader Rating: (0)
apex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enough
Feedback Score: 0 reviews
I would have done it when the tranny was out too. The issue is that I bought the car swapped. I just want to make sure there is no other way before I go about pulling the motor out / dropping the transmission. Do you know if the signal from the sensor is constant or does it vary with rpm? Also do you think that this code would fail emissions?
apex128 is offline   Reply With Quote
Old 05-07-2017, 06:56 PM   #5
apex128
Leaky Injector
 
Join Date: Jul 2016
Location: Chicago suburbs
Posts: 78
Trader Rating: (0)
apex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enoughapex128 will become famous soon enough
Feedback Score: 0 reviews
Bump. What ohm resistor could i use to bypass this thing?
apex128 is offline   Reply With Quote
Old 05-08-2017, 12:36 AM   #6
Agamemnon
Premium Member
 
Agamemnon's Avatar
 
Join Date: Sep 2003
Location: Edmonds, WA
Age: 34
Posts: 2,259
Trader Rating: (18)
Agamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfectionAgamemnon is close to perfection
Feedback Score: 18 reviews
Quote:
Originally Posted by apex128 View Post
Bump. What ohm resistor could i use to bypass this thing?
You don't. Pull the trans out and follow this guide and do it right.
http://forums.nicoclub.com/s13-ka24d...p-t384931.html
Agamemnon is offline   Reply With Quote
Reply

Bookmarks

Tags
cel, crank position sensor, ecu, egr, trouble code


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:16 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
vB.Sponsors
Copyright © 1998 - 2015, Zilvia.net™