Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 09-05-2013, 12:48 PM   #1
CharCharXD
Zilvia Junkie
 
CharCharXD's Avatar
 
Join Date: Apr 2012
Location: Death Valley
Posts: 384
Trader Rating: (5)
CharCharXD is an unknown quantity at this point
Feedback Score: 5 reviews
RB Rb25det to s14 M63 plug wiring help!

Everyones saying this wiring is cake no no no I understand that the KA engine harness has a f3 plug which is the same as the rb25det m63 plug but with different pin locations. Ive been referring to the diagrams in Sileighty_85's "Project RB (How To)" thread. Pictures are kind of blurry and I can only use some information on those diagrams because of this.

I found another guide that shows how to wire the rb25det M63 to the 200sx s14 f4 plug (sr20det). This guide is found here. I also found a guide that helps you figure out how to refer to the sr20det f4 plug to find to orientation on the Ka f3 plug. ---> Here

So what I have in front of me is an rb25det series 1 harness and a 97 ka24de harness. Both guides say to cut off the ka/sr f3 plug. But this guide says towards the end that all you have to do is repin the M63 plug. So does that mean I dont use the Ka f3 plug or?? Which plug do I use? The Ka f3 or the rb m63? I know that I have to take some pins from the ecu and put them into the f3 plug. I cant find any clear resolution pinouts for the rb25det m63 plug.

I'm kind of lost right now guys! All these wires are overwhelming me. Maybe I'm over thinking it but I just need some help. Please! Thanks guys. lol
CharCharXD is offline   Reply With Quote
Sponsored Links
Old 09-05-2013, 07:51 PM   #2
CharCharXD
Zilvia Junkie
 
CharCharXD's Avatar
 
Join Date: Apr 2012
Location: Death Valley
Posts: 384
Trader Rating: (5)
CharCharXD is an unknown quantity at this point
Feedback Score: 5 reviews
Someone please help!
CharCharXD is offline   Reply With Quote
Old 09-05-2013, 08:19 PM   #3
BoredEE
Leaky Injector
 
Join Date: Aug 2009
Location: Chicago, IL
Posts: 146
Trader Rating: (0)
BoredEE is an unknown quantity at this point
Feedback Score: 0 reviews
https://home.comcast.net/~tekk2/RB25...S14wiring.xlsx

Let me know if you can't open an xlsx

I put this together when I went through my harness

This doesn't spell it out exactly, but you should be able to figure it out.

If the M63 plug is physically the same as the F3 I would just repin it if possible.
If there isn't a need to cut up a good harness then dont.
BoredEE is offline   Reply With Quote
Old 09-06-2013, 11:40 AM   #4
CharCharXD
Zilvia Junkie
 
CharCharXD's Avatar
 
Join Date: Apr 2012
Location: Death Valley
Posts: 384
Trader Rating: (5)
CharCharXD is an unknown quantity at this point
Feedback Score: 5 reviews
Quote:
Originally Posted by BoredEE View Post
https://home.comcast.net/~tekk2/RB25...S14wiring.xlsx

Let me know if you can't open an xlsx

I put this together when I went through my harness

This doesn't spell it out exactly, but you should be able to figure it out.

If the M63 plug is physically the same as the F3 I would just repin it if possible.
If there isn't a need to cut up a good harness then dont.
Okay so if I were to use this guide. What I have have to do is cut the f3 plug off of the Ka harness then solder the wires shown in red and purple in the guide to the wires of the ecu? Or do I pull the pin out of the ecu and put it into the f3 plug? What do I do with the remaining wires that were cut on the f3 plug shown in grey?
CharCharXD is offline   Reply With Quote
Old 09-06-2013, 02:11 PM   #5
EnemyS15
Nissanaholic!
 
Join Date: Jul 2006
Location: Tampa, Florida
Posts: 1,677
Trader Rating: (14)
EnemyS15 is an unknown quantity at this point
Feedback Score: 14 reviews
Don't cut anything, just repin.
__________________
Check out my build thread! http://zilvia.net/f/builds-builds-on...rhd-build.html
EnemyS15 is offline   Reply With Quote
Reply

Bookmarks

Tags
m63, rb25det, wiring


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 05:54 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net