|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars |
|
Thread Tools | Display Modes |
06-08-2017, 08:22 PM | #1 |
Zilvia Junkie
|
Shifter snap ring question (SR trans)
So with the engine/trans I recieved, the shifter came without the shift knob and it had the rest of everything. It came with a snap ring that goes in the groove when the shifter is in place. I'm not sure if the ring that came with it is original or not but when I put it in the groove I can do it by hand without compressing the ring and it fits in the grove then after moving the shifter a little bit it comes out of place. Does anyone know a part number or can i get another one of these snap rings at any parts store? it seems smaller than it should be the way it comes out of place.
|
Sponsored Links |
06-08-2017, 08:39 PM | #2 |
There are 2 different snap rings needed. Sounds like you need the one that holds the shifter cup in place, which is the first part number below.
RING-SNAP CONTROL LEVER - 32204-V5004 RING SNAP - 32204-V5003 |
|
06-09-2017, 01:05 AM | #3 |
Zilvia Junkie
|
i see that makes sense then, i had a feeling something was either missing or this was the wrong size. You wouldn't happen to have pics of how it all goes in place do you?
|
06-09-2017, 06:33 PM | #5 |
Zilvia Junkie
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|