Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 04-17-2018, 05:05 PM   #3811
battery1882
Zilvia Addict
 
battery1882's Avatar
 
Join Date: Jan 2005
Location: Fullerton, CA
Age: 42
Posts: 700
Trader Rating: (13)
battery1882 will become famous soon enoughbattery1882 will become famous soon enoughbattery1882 will become famous soon enoughbattery1882 will become famous soon enough
Feedback Score: 13 reviews
Quote:
Originally Posted by slider2828 View Post
No that hole is way too big.... It should be closer to a pin hole size unless you have a fitting on the block that restricts oil.
Agreed, make sure the bottom male end (mounted to turbo) has pin sized hole.

GT2871r .86
1000cc ID
S3 cam
BC springs
forged internal 8.5:1 compression
stock exh manifold with internal gate
freddy manifold
aeromotive 340 pump
350hp dynapack (unmodified dynapack)
330hp with hood closed w/heatsoak
tuned on CA 91 oct by Koji @ Autotalent
__________________
instagram : battery1882
www.sterculture.com
battery1882 is offline   Reply With Quote
Sponsored Links
Old 04-17-2018, 06:37 PM   #3812
Driftaholic84
Leaky Injector
 
Join Date: Feb 2018
Location: Dirty south
Posts: 124
Trader Rating: (4)
Driftaholic84 is an unknown quantity at this point
Feedback Score: 4 reviews
The block end, has the oem banjo fitting on it.
Where do I get said restrictor?
Driftaholic84 is offline   Reply With Quote
Old 04-17-2018, 09:37 PM   #3813
e30gangsta
Zilvia Addict
 
Join Date: Oct 2013
Location: Denver Colorado
Age: 38
Posts: 610
Trader Rating: (4)
e30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to all
Feedback Score: 4 reviews
So the consensus for a solid reliable det head setup seems to be.

B15 Roller Rocker Lifters
dual rocker arm guide conversion
jwt cams and springs

Correct?

Will this setup allow you to spin to 9k rpm safely?

Anything else we should add or modify while in there?
e30gangsta is offline   Reply With Quote
Old 04-17-2018, 10:42 PM   #3814
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
Quote:
Originally Posted by Driftaholic84 View Post
The block end, has the oem banjo fitting on it.
Where do I get said restrictor?
You can get any where... ATP Turbo, FRSport, Enjuku.. just remember its the smaller diameter restrictor, not the big one you have....
__________________
Turn and Burn!
slider2828 is offline   Reply With Quote
Old 04-18-2018, 03:40 AM   #3815
derass
Zilvia FREAK!
 
Join Date: Jun 2010
Location: Toronto, ON
Age: 36
Posts: 1,182
Trader Rating: (0)
derass is making a name for him/her selfderass is making a name for him/her self
Feedback Score: 0 reviews
Quote:
Originally Posted by slider2828 View Post
just remember its the smaller diameter restrictor, not the big one you have....
~0.030" for ball bearing turbos
derass is offline   Reply With Quote
Old 04-18-2018, 07:01 PM   #3816
Driftaholic84
Leaky Injector
 
Join Date: Feb 2018
Location: Dirty south
Posts: 124
Trader Rating: (4)
Driftaholic84 is an unknown quantity at this point
Feedback Score: 4 reviews
Ordered one from enjuku today for like $14.. thanks everyone.
Driftaholic84 is offline   Reply With Quote
Old 09-17-2018, 08:45 AM   #3817
Bleakley
Zilvia Addict
 
Join Date: Apr 2011
Location: Near Pittsburgh, PA
Posts: 637
Trader Rating: (1)
Bleakley is an unknown quantity at this point
Feedback Score: 1 reviews
Not an SR, but curious what some of your guys' input would be...
KA24DE-T, 360-375hp (preferably whp) with the supporting mods. Note on cams --> Only will play around with mixing / matching stock cams.
GT2871R/GTX2867R? Or GTX2871R?
Or GTX2971R (84 trim) due to being 2.4L?

If GT2871 or GTX2867 I'd have to run boost ~21.5+.
If GTXxx71R I'd only have to run boost ~18psi.
Bleakley is offline   Reply With Quote
Old 11-26-2018, 11:40 AM   #3818
JacksonBrown
Zilvia Member
 
JacksonBrown's Avatar
 
Join Date: Aug 2007
Location: recliner of rage
Posts: 226
Trader Rating: (0)
JacksonBrown is an unknown quantity at this point
Feedback Score: 0 reviews
GT2871R .64 AR
S14 SR
Pro EFI 48
Stock head
Stock block
Stock exhaust manifold
Sard 550cc Injectors
Sard Fuel Pressure Regulator
Nissan OEM N15 Pulsar 70mm throttle body
Tomei throttle body adaptor
Stock intake manifold - port matched to 70mm throttle body
FMIC
3" exhaust from turbo back
91 octane pump gas

17.8 psi boost

318.81 whp / 281.17 ft/tq

Tuned by Justin @ Black Market Racing, Phoenix Arizona
Attached Images
File Type: jpg S14 Dyno.jpg (103.9 KB, 27 views)
JacksonBrown is offline   Reply With Quote
Old 01-04-2019, 10:18 PM   #3819
DoingOK
 
Join Date: Apr 2017
Location: Hampton Roads
Posts: 31
Trader Rating: (0)
DoingOK is an unknown quantity at this point
Feedback Score: 0 reviews
I bought an SR20DET motor for my son to build for Christmas. He currently has a 1991 180SX which has a stock SR20DET redtop in it which will be replaced with this "built" spare. We are reviewing turbo upgrades to go along with his build and happened upon this thread. So far, we've had the block pressure checked, bored (86.5mm) and decked 10 thousandths. I already purchased BC 264 cams, BC springs, titanium retainers, SuperTech inconel oversized valves with all new guides and seals, BC forged rods with JE forged pistons, King bearings and a new HKS tubular exhaust manifold. Right now we are going to use the stock intake manifold with a Radium fuel rail, 750cc DeatschWerks injectors and an Aeromotive FPR. The head is going in to get cleaned up and a port/polish/valve job will be accomplished. He's looking for 350-400whp to be used for some road course racing @ VIR. He's been eyeing the GTX 2867 Gen2 series. With the current parts list he has, would the 2871R be a better choice for his desired output?
Attached Images
File Type: jpg IMG_6131.JPG (494.1 KB, 28 views)
DoingOK is offline   Reply With Quote
Old 01-05-2019, 08:13 AM   #3820
e30gangsta
Zilvia Addict
 
Join Date: Oct 2013
Location: Denver Colorado
Age: 38
Posts: 610
Trader Rating: (4)
e30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to all
Feedback Score: 4 reviews
Quote:
Originally Posted by DoingOK View Post
I bought an SR20DET motor for my son to build for Christmas. He currently has a 1991 180SX which has a stock SR20DET redtop in it which will be replaced with this "built" spare. We are reviewing turbo upgrades to go along with his build and happened upon this thread. So far, we've had the block pressure checked, bored (86.5mm) and decked 10 thousandths. I already purchased BC 264 cams, BC springs, titanium retainers, SuperTech inconel oversized valves with all new guides and seals, BC forged rods with JE forged pistons, King bearings and a new HKS tubular exhaust manifold. Right now we are going to use the stock intake manifold with a Radium fuel rail, 750cc DeatschWerks injectors and an Aeromotive FPR. The head is going in to get cleaned up and a port/polish/valve job will be accomplished. He's looking for 350-400whp to be used for some road course racing @ VIR. He's been eyeing the GTX 2867 Gen2 series. With the current parts list he has, would the 2871R be a better choice for his desired output?
If you have the money to spend on a gtx2867 gen 2, might as well buy their new g550. The 2871r is old tech. The new one has insane amounts of response and great power. Also ditch those bc 264's and run some jwts4hl's.
e30gangsta is offline   Reply With Quote
Old 01-05-2019, 09:09 AM   #3821
DoingOK
 
Join Date: Apr 2017
Location: Hampton Roads
Posts: 31
Trader Rating: (0)
DoingOK is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by e30gangsta View Post
If you have the money to spend on a gtx2867 gen 2, might as well buy their new g550. The 2871r is old tech. The new one has insane amounts of response and great power. Also ditch those bc 264's and run some jwts4hl's.
Thanks for that info....I'll check it out. I didn't realize people are not fond of the BC cams.
DoingOK is offline   Reply With Quote
Old 01-05-2019, 04:34 PM   #3822
e30gangsta
Zilvia Addict
 
Join Date: Oct 2013
Location: Denver Colorado
Age: 38
Posts: 610
Trader Rating: (4)
e30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to alle30gangsta is a name known to all
Feedback Score: 4 reviews
Quote:
Originally Posted by DoingOK View Post
Thanks for that info....I'll check it out. I didn't realize people are not fond of the BC cams.
Ehhh they're not horrible. But jwt s3, s4, or s4hl is the much better choice.
e30gangsta is offline   Reply With Quote
Old 01-06-2019, 11:43 AM   #3823
JL240
Leaky Injector
 
JL240's Avatar
 
Join Date: Jan 2011
Location: EDM canada
Posts: 124
Trader Rating: (2)
JL240 is an unknown quantity at this point
Feedback Score: 2 reviews
https://c1.staticflickr.com/5/4847/3...78bc57_o_d.png

Dyno tuned 2 days ago 391hp 436tq. Stock bottom end

Sr20det black top, gt2871r .86, hks bottom mount mani, nismo740 inj, Jim wold s4 cams, and water meth kit

These torque #s don’t seam right to me wouldnt mind someone’s opinion on why the two # is so high
JL240 is offline   Reply With Quote
Old 01-07-2019, 01:43 PM   #3824
fatduece
Zilvia Addict
 
Join Date: Apr 2011
Location: hoonigay
Posts: 673
Trader Rating: (0)
fatduece is an unknown quantity at this point
Feedback Score: 0 reviews
Lol you got those feel good numbers bruh!
fatduece is offline   Reply With Quote
Old 01-07-2019, 02:16 PM   #3825
ultimateirving
Zilvia FREAK!
 
ultimateirving's Avatar
 
Join Date: Nov 2010
Location: arizona
Age: 36
Posts: 1,521
Trader Rating: (1)
ultimateirving is an unknown quantity at this point
Feedback Score: 1 reviews
All that should be more than enough to support your power goals and then some. The 2871r is tried and true for this power range, but is at about its limit.




Quote:
Originally Posted by DoingOK View Post
I bought an SR20DET motor for my son to build for Christmas. He currently has a 1991 180SX which has a stock SR20DET redtop in it which will be replaced with this "built" spare. We are reviewing turbo upgrades to go along with his build and happened upon this thread. So far, we've had the block pressure checked, bored (86.5mm) and decked 10 thousandths. I already purchased BC 264 cams, BC springs, titanium retainers, SuperTech inconel oversized valves with all new guides and seals, BC forged rods with JE forged pistons, King bearings and a new HKS tubular exhaust manifold. Right now we are going to use the stock intake manifold with a Radium fuel rail, 750cc DeatschWerks injectors and an Aeromotive FPR. The head is going in to get cleaned up and a port/polish/valve job will be accomplished. He's looking for 350-400whp to be used for some road course racing @ VIR. He's been eyeing the GTX 2867 Gen2 series. With the current parts list he has, would the 2871R be a better choice for his desired output?
__________________
Z32 with lq4 swap
Desert Street Scene || Dssevents.com
ultimateirving is offline   Reply With Quote
Old 01-07-2019, 06:04 PM   #3826
derass
Zilvia FREAK!
 
Join Date: Jun 2010
Location: Toronto, ON
Age: 36
Posts: 1,182
Trader Rating: (0)
derass is making a name for him/her selfderass is making a name for him/her self
Feedback Score: 0 reviews
Quote:
Originally Posted by JL240 View Post
https://c1.staticflickr.com/5/4847/3...78bc57_o_d.png

Dyno tuned 2 days ago 391hp 436tq. Stock bottom end

Sr20det black top, gt2871r .86, hks bottom mount mani, nismo740 inj, Jim wold s4 cams, and water meth kit

These torque #s don’t seam right to me wouldnt mind someone’s opinion on why the two # is so high
That thing is spooling nicely. I assume that's around 20 psi. So full boost at 4300 RPM is really good, especially since it's a 0.86.
derass is offline   Reply With Quote
Old 01-07-2019, 07:51 PM   #3827
JL240
Leaky Injector
 
JL240's Avatar
 
Join Date: Jan 2011
Location: EDM canada
Posts: 124
Trader Rating: (2)
JL240 is an unknown quantity at this point
Feedback Score: 2 reviews
Yes you are correct great combo .86 with the s4
JL240 is offline   Reply With Quote
Old 01-14-2019, 01:14 AM   #3828
SidewaySSS
 
Join Date: Jan 2019
Location: South Africa
Posts: 28
Trader Rating: (0)
SidewaySSS is an unknown quantity at this point
Feedback Score: 0 reviews
Used a 2871 with Jun 256/10,5 cams on an otherwise stock motor, very impressive in a 800kg car.
No Dyno graphs but made 215kw atw at 15psi, messed around with higher boost & e85 with some good results but this is a daily driver & needed to have it super reliable.
I craved a little more power but wanted to stay at 15psi max so I opted for a GTX2976r, as I had no interest in going high on the boost, I ordered it with a 0.63 housing & T04B comp housing, capped it off with a SS bottom mount equil length manifold.
The results were more than exceptable 15psi by 4100rpm, 243kw @ 7100rpm.
I am thinking of maybe doing a cam change to the s4 perhaps or Tomei Pro 260/12 Hyd.
SidewaySSS is offline   Reply With Quote
Old 05-10-2020, 12:41 PM   #3829
blksylv
Nissanaholic!
 
blksylv's Avatar
 
Join Date: Nov 2007
Location: bumfuck VA
Posts: 1,823
Trader Rating: (33)
blksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymoreblksylv is not welcome here anymore
Feedback Score: 33 reviews
Swapped out the stock exhaust manifold for a jazz manifold and picked up 30hp with the retune.

https://youtu.be/6QdBJtoyxYo



__________________
Quote:
Originally Posted by ixfxi View Post
there is nothing wrong with enjoying the build. however, we sometimes have to remind ourselves that the build is only one part of the puzzle, and that ultimately - enjoying and driving the car is the number one priority.
blksylv is offline   Reply With Quote
Old 08-11-2020, 12:21 PM   #3830
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Has anybody actually installed the AGP 2871r turbine housing that has the Tial MVs external wastegate flange? I have a manifold that I don't really want to modify with a gate. Would love to run the external gate off the turbine housing.

I'm skeptical that it actually clears the strut tower and brake components on LHD? If anyone has photos of the AGP external gate turbine housing installed i'd love to see it.

I picked up a 2871r, first time owning one. Has an HKS actuator already. I'm tempted to try porting the internal gate, but I know nothing will work as good as external.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 08-19-2020, 09:16 PM   #3831
5t341tH
Post Whore!
 
5t341tH's Avatar
 
Join Date: Jun 2006
Location: socal (Huntington Beach)
Age: 35
Posts: 2,787
Trader Rating: (14)
5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute5t341tH has a reputation beyond repute
Feedback Score: 14 reviews
Send a message via AIM to 5t341tH
Like this?
__________________

lexus baby
5t341tH is offline   Reply With Quote
Old 10-04-2020, 09:47 AM   #3832
coupesallday!
Post Whore!
 
coupesallday!'s Avatar
 
Join Date: Sep 2011
Location: 661,Lancaster,CA
Posts: 3,234
Trader Rating: (18)
coupesallday! is a jewel in the roughcoupesallday! is a jewel in the roughcoupesallday! is a jewel in the roughcoupesallday! is a jewel in the roughcoupesallday! is a jewel in the roughcoupesallday! is a jewel in the roughcoupesallday! is a jewel in the rough
Feedback Score: 18 reviews
Send a message via MSN to coupesallday!


Sorry for the big photo but s14 Sr20det
86.25 wiseco pistons 9:1 compression
Eagle rods
Acl race bearings
750cc injectors
Gt2871r .64 ar
Tomei expreme manifold
3 inch full exhaust
Mac boost controller


Made 290hp and 257 tq at 14 psi
__________________
Quote:
Originally Posted by Matej View Post
Throw some glitter flake and crazy glue in there.

Last edited by coupesallday!; 10-25-2020 at 11:52 AM..
coupesallday! is offline   Reply With Quote
Old 10-04-2020, 03:38 PM   #3833
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
Quote:
Originally Posted by 5t341tH View Post
Like this? [IMG][/IMG]
Yes exactly what I said.
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 03-26-2021, 02:38 PM   #3834
spools420a
Zilvia Junkie
 
spools420a's Avatar
 
Join Date: Dec 2009
Location: phoenix az
Age: 42
Posts: 460
Trader Rating: (1)
spools420a is a well-known jackass
Feedback Score: 1 reviews
Hey what size oil restrictor do we run with a redtop sr and 2871r journal bearing 2871r ( NON ball bearing)?

I have a rev9 2871r and the specs are

Compressor Wheel Diameter: 71mm / 52mm Trim

Turbine Wheel Diameter: 53.85mm / 76mm Trim

Exhaust Trim: .64 AR

Cooling Type: Oil and Water Cooled
spools420a is offline   Reply With Quote
Old 03-26-2021, 09:22 PM   #3835
lok
Zilvia Addict
 
lok's Avatar
 
Join Date: Jul 2003
Location: Oklahoma
Posts: 815
Trader Rating: (10)
lok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond reputelok has a reputation beyond repute
Feedback Score: 10 reviews
Quote:
Originally Posted by spools420a View Post
Hey what size oil restrictor do we run with a redtop sr and 2871r journal bearing 2871r ( NON ball bearing)?

I have a rev9 2871r and the specs are

Compressor Wheel Diameter: 71mm / 52mm Trim

Turbine Wheel Diameter: 53.85mm / 76mm Trim

Exhaust Trim: .64 AR

Cooling Type: Oil and Water Cooled
lok is offline   Reply With Quote
Old 05-04-2021, 02:24 PM   #3836
spools420a
Zilvia Junkie
 
spools420a's Avatar
 
Join Date: Dec 2009
Location: phoenix az
Age: 42
Posts: 460
Trader Rating: (1)
spools420a is a well-known jackass
Feedback Score: 1 reviews
Hey all what psi would be recommended to make 300whp with this common setup of

redtop sr20
2871r - 64
z32 maf
550cc inj
freddy fmic
enthalpy ecu
91 oct and base timing program
basic bolt ons like
megan 3 inch test pipe
megan turbo elbow
mbc
though oem exhaust piping and muffler test pipe back.
spools420a is offline   Reply With Quote
Old 05-04-2021, 02:27 PM   #3837
spools420a
Zilvia Junkie
 
spools420a's Avatar
 
Join Date: Dec 2009
Location: phoenix az
Age: 42
Posts: 460
Trader Rating: (1)
spools420a is a well-known jackass
Feedback Score: 1 reviews
Quote:
Originally Posted by lok View Post
Thanks!mines a little larger at 1.8mm but should be good.
spools420a is offline   Reply With Quote
Old 05-04-2021, 04:50 PM   #3838
slider2828
Post Whore!
 
slider2828's Avatar
 
Join Date: Oct 2004
Location: San Francisco, CA
Posts: 5,992
Trader Rating: (13)
slider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfectionslider2828 is close to perfection
Feedback Score: 13 reviews
You guys still runing BOVs on this? Everyone says they are useless.... what you guys think?
__________________
Turn and Burn!
slider2828 is offline   Reply With Quote
Old 05-10-2021, 10:12 AM   #3839
TheRealSy90
Post Whore!
 
TheRealSy90's Avatar
 
Join Date: Mar 2009
Location: Maricopa, AZ
Age: 33
Posts: 7,721
Trader Rating: (10)
TheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant futureTheRealSy90 has a brilliant future
Feedback Score: 10 reviews
I assume if i'm using the oem s15 bb restricted banjo bolt in the oil feed line to the block, then I shouldn't use the restrictor fitting on the turbo end?
__________________
Quote:
Originally Posted by crimsonrockett View Post
Such a good signature.
TheRealSy90 is offline   Reply With Quote
Old 05-19-2021, 11:43 AM   #3840
jr_ss
Post Whore!
 
Join Date: Dec 2005
Location: Pa
Posts: 6,410
Trader Rating: (35)
jr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond reputejr_ss has a reputation beyond repute
Feedback Score: 35 reviews
Send a message via AIM to jr_ss
Quote:
Originally Posted by TheRealSy90 View Post
I assume if i'm using the oem s15 bb restricted banjo bolt in the oil feed line to the block, then I shouldn't use the restrictor fitting on the turbo end?
Correct. One or the other, not both.
__________________
*My SR20VET* Does your VTC gear rattle in your S14/15 SR? PM me.
jr_ss is online now   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:23 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net