UT Classic 3 piece KINESIS K18 18x8 et32 on all four - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DRiFTiNGHETTOKiD · 07-12-2012, 11:58 AM

I have a set of anodized grayish/bronze colored Kinesis K18 wheels. They're very lite weight(approximately 18Lbs) 3 piece modular wheels. Two of the The wheels are in good shape, but has lite curbings, and little nicks on them. The first two are good/excellent once polished up. The other two also have curbings, and pothole bends on the lips. The last two wheels will/should be replaced or repaired. But I ran them in the rears, and hold air no wobbling. The rear barrels seems to be round, and true(except for wheel #2 has a slight pot hole flatspot). The wheels does not come with center caps. I measured the overall width to be 8 5/8". The rear barrels measures roughly 6.5", and lips are about 1.5".

All four wheels have been balanced with tires with no issues. All four wheels have oxidations, and brake dusts, and lite pitting(on backside). But overall in good shape for custom rebuild projects. It seems the wheels have never been split.

If your looking for show quality Kinesis wheels, then this FS thread is not for you, and go buy brand new. BUT if your looking for custom/classic/high dollar wheels for cheap/low price and getting bigger lips, then this is it. The original owner of the car I purchased said they were Kinesis wheels, but the wheels does not have any markings stating Kinesis wheels. By googling Kinesis K18, visually it identified that the wheels are Kinesis made. The offsets are not marked on the wheels. I took overall width of 8 5/8 and 6" backspacing into an offset calculator, and It came out to be et32.

I've recently seen online. The same wheels, and looks like same conditions are going for $1500/asking.

I will ship/insure at buyers expenses. Paypal is also accepted.
please feel free to txt or call me between 7am-8pm at 801-879-035zero. I can send additional pictures.

DRiFTiNGHETTOKiD · 07-12-2012, 02:26 PM

For some reason I can't post pictures because I maxed out my picture posting?

DRiFTiNGHETTOKiD · 07-13-2012, 04:00 PM

Email me, pm me, txt me, call me for more pictures n questions...

joshuaput · 07-13-2012, 04:12 PM

have these been welded? whats the skinny on them? dont look like 3 piece.

DRiFTiNGHETTOKiD · 07-15-2012, 11:22 AM

Yes these are actual 3 piece modular wheels. They have not been welded around the seems nor on the barrels. They, I believe have the original silicone around the seems. Ill add a picture of the wheel test fitted on my Turbo NSX. Call or txt me for more detailed pictures.

DRiFTiNGHETTOKiD · 08-24-2012, 11:32 AM

NEW LOWER PRICE $1000 SHIPPED TO LOWER 48.
Nothing lower, if I don't sell it then ill just rebuild them. They're sold as is with no warranty implied or refund. Please ask all info and pictures.
thanks

DRiFTiNGHETTOKiD · 09-15-2012, 06:14 PM

Last bump before i take it off to refinish them...

sokodu · 09-16-2012, 12:01 AM

Just an FYI. Since you bought the car with these wheels I am assuming you don't know too much about Kinesis Wheels but what you have at K10's not K18's. Just letting you know so you don't mislead a potential buyer.

DRiFTiNGHETTOKiD · 09-16-2012, 07:44 AM

Your absolutely right.. thanks for the info on the wheels.

07-12-2012, 11:58 AM	#1
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	Classic 3 piece KINESIS K18 18x8 et32 on all four. $1000 shipped I have a set of anodized grayish/bronze colored Kinesis K18 wheels. They're very lite weight(approximately 18Lbs) 3 piece modular wheels. Two of the The wheels are in good shape, but has lite curbings, and little nicks on them. The first two are good/excellent once polished up. The other two also have curbings, and pothole bends on the lips. The last two wheels will/should be replaced or repaired. But I ran them in the rears, and hold air no wobbling. The rear barrels seems to be round, and true(except for wheel #2 has a slight pot hole flatspot). The wheels does not come with center caps. I measured the overall width to be 8 5/8". The rear barrels measures roughly 6.5", and lips are about 1.5". All four wheels have been balanced with tires with no issues. All four wheels have oxidations, and brake dusts, and lite pitting(on backside). But overall in good shape for custom rebuild projects. It seems the wheels have never been split. If your looking for show quality Kinesis wheels, then this FS thread is not for you, and go buy brand new. BUT if your looking for custom/classic/high dollar wheels for cheap/low price and getting bigger lips, then this is it. The original owner of the car I purchased said they were Kinesis wheels, but the wheels does not have any markings stating Kinesis wheels. By googling Kinesis K18, visually it identified that the wheels are Kinesis made. The offsets are not marked on the wheels. I took overall width of 8 5/8 and 6" backspacing into an offset calculator, and It came out to be et32. I've recently seen online. The same wheels, and looks like same conditions are going for $1500/asking. I will ship/insure at buyers expenses. Paypal is also accepted. please feel free to txt or call me between 7am-8pm at 801-879-035zero. I can send additional pictures. __________________ "Convertible drop fill, '92 and the top peel back" Last edited by DRiFTiNGHETTOKiD; 10-13-2012 at 02:46 PM.. Reason: New pricing...

07-13-2012, 04:00 PM	#3
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	Email me, pm me, txt me, call me for more pictures n questions... __________________ "Convertible drop fill, '92 and the top peel back"

07-13-2012, 04:12 PM	#4
joshuaput Leaky Injector Join Date: Sep 2006 Location: U-tah? Age: 41 Posts: 94 Trader Rating: (1) Feedback Score: 1 reviews	have these been welded? whats the skinny on them? dont look like 3 piece. __________________

08-24-2012, 11:32 AM	#6
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	New lower price $1000 shipped to lower 48. NEW LOWER PRICE $1000 SHIPPED TO LOWER 48. Nothing lower, if I don't sell it then ill just rebuild them. They're sold as is with no warranty implied or refund. Please ask all info and pictures. thanks __________________ "Convertible drop fill, '92 and the top peel back"

09-15-2012, 06:14 PM	#7
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	last bump before i take it off. Last bump before i take it off to refinish them... __________________ "Convertible drop fill, '92 and the top peel back"

07-12-2012, 02:26 PM	#2
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	For some reason I can't post pictures because I maxed out my picture posting? __________________ "Convertible drop fill, '92 and the top peel back"

09-16-2012, 12:01 AM	#8
sokodu Zilvia Addict Join Date: Apr 2007 Location: Bay Area, CA. Posts: 749 Trader Rating: (20) Feedback Score: 20 reviews	Just an FYI. Since you bought the car with these wheels I am assuming you don't know too much about Kinesis Wheels but what you have at K10's not K18's. Just letting you know so you don't mislead a potential buyer.

09-16-2012, 07:44 AM	#9
DRiFTiNGHETTOKiD Zilvia Member Join Date: Jan 2010 Location: KGBLOCK, UT Posts: 154 Trader Rating: (11) Feedback Score: 11 reviews	Your absolutely right.. thanks for the info on the wheels. __________________ "Convertible drop fill, '92 and the top peel back"