Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 10-29-2013, 06:24 PM   #1
Greybush
Leaky Injector
 
Join Date: Oct 2013
Location: Twin cities, MN
Posts: 58
Trader Rating: (1)
Greybush is an unknown quantity at this point
Feedback Score: 1 reviews
Ka24de stuck in limp mode help please

So I have a 93 coupe. The previous owner rebuilt the ka24de and deleted egr. I got it and had it running fine for a while, went to get in it next day started up and idled at around 2000 but went down slighty after warmup. Took it for a drive and won't go past 2000rpm. Pulled codes and saw it said maf was bad. Which didn't make sense since worked the day before. So I replaced fuel pump, and maf. Still doing it. Checked my fuel filter and it's fine. Checked for vacuum leaks and there are none. Also when driving car if you take it out of gear after it bogs it just dies. What else could it be?
Greybush is offline   Reply With Quote
Sponsored Links
Old 10-30-2013, 03:57 AM   #2
goldens14
Leaky Injector
 
goldens14's Avatar
 
Join Date: Feb 2013
Location: San Diego
Posts: 112
Trader Rating: (0)
goldens14 is an unknown quantity at this point
Feedback Score: 0 reviews
i'm having the same issue with my car, hope someone helps us out bro
goldens14 is offline   Reply With Quote
Old 10-30-2013, 08:51 AM   #3
UnknownGuy
Zilvia Member
 
UnknownGuy's Avatar
 
Join Date: Jun 2006
Location: Long Beach, CA
Posts: 206
Trader Rating: (12)
UnknownGuy is an unknown quantity at this point
Feedback Score: 12 reviews
Sounds like a issue ussually associated with a vaccume leak, but if you have already found that there wasnt one then check your MAf. Try unplugging the Maf and starting the car. If it has a hard time ideling your Maf is probably still ok. If it isnt and the car seems to run the same way, then you know that it probably isnt from your Maf and the problem is elsewhere. Hope this helps good luck.
UnknownGuy is offline   Reply With Quote
Old 01-21-2014, 02:55 AM   #4
goldens14
Leaky Injector
 
goldens14's Avatar
 
Join Date: Feb 2013
Location: San Diego
Posts: 112
Trader Rating: (0)
goldens14 is an unknown quantity at this point
Feedback Score: 0 reviews
Check wires coming off the maf sensor,?


Sent from my iPhone using Tapatalk
goldens14 is offline   Reply With Quote
Old 01-21-2014, 03:01 AM   #5
goldens14
Leaky Injector
 
goldens14's Avatar
 
Join Date: Feb 2013
Location: San Diego
Posts: 112
Trader Rating: (0)
goldens14 is an unknown quantity at this point
Feedback Score: 0 reviews
I had the same issue a month ago, changed a few sensors and same issue, followed my wire that hooks up to my maf and it was broken


Sent from my iPhone using Tapatalk
goldens14 is offline   Reply With Quote
Old 01-21-2014, 11:35 AM   #6
sleepyS14se
Zilvia Addict
 
sleepyS14se's Avatar
 
Join Date: Jul 2013
Location: Georgia
Age: 34
Posts: 880
Trader Rating: (3)
sleepyS14se is an unknown quantity at this point
Feedback Score: 3 reviews
bad MAF


replace it and get back with us.

(as the above post states, check for an open or shorted wire(s) going to the MAF before replacing.
__________________
95 S14 se RB25DET 348whp
sleepyS14se is offline   Reply With Quote
Reply

Bookmarks

Tags
bogging, die, fuel, ka24de, maf


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:35 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
vB.Sponsors
Copyright ? 1998 - 2022, Zilvia.net