1995 240sx Gas Gauge Not Working - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Creolex · 02-06-2018, 01:07 PM

Fuel pump fuse kept blowing so I changed the fuel pump. The fuse issue is resolved but now the gas gauge is not working. NOTE: Before changing the fuel pump I noticed that it was not attached to the bracket. I attached the new pump to the bracket. It was working fine before I changed out the pumps which makes me believe that it may not be a bad sending unit and perhaps something that I did or did not do. Please advise.

Gearhead9992 · 02-11-2018, 05:48 AM

When you pulled out the bracket for the pump did you pull everything else out

oLemurs · 02-12-2018, 01:57 PM

Quote:

Originally Posted by Creolex

Fuel pump fuse kept blowing so I changed the fuel pump. The fuse issue is resolved but now the gas gauge is not working. NOTE: Before changing the fuel pump I noticed that it was not attached to the bracket. I attached the new pump to the bracket. It was working fine before I changed out the pumps which makes me believe that it may not be a bad sending unit and perhaps something that I did or did not do. Please advise.

see if your floater detatched, if not move the rod around and see if it moves on the cluster

Gearhead9992 · 02-12-2018, 02:04 PM

S14s don't have rods they have a big tube that sits on a bracket in the tank you will have to pull everything out and split the tube and check maybe clean the contacts

02-06-2018, 01:07 PM	#1
Creolex Join Date: Feb 2018 Location: USA Posts: 2 Trader Rating: (0) Feedback Score: 0 reviews	1995 240sx Gas Gauge Not Working Fuel pump fuse kept blowing so I changed the fuel pump. The fuse issue is resolved but now the gas gauge is not working. NOTE: Before changing the fuel pump I noticed that it was not attached to the bracket. I attached the new pump to the bracket. It was working fine before I changed out the pumps which makes me believe that it may not be a bad sending unit and perhaps something that I did or did not do. Please advise.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-11-2018, 05:48 AM	#2
Gearhead9992 Leaky Injector Join Date: Aug 2017 Location: Northeast Ga Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	When you pulled out the bracket for the pump did you pull everything else out

02-12-2018, 02:04 PM	#4
Gearhead9992 Leaky Injector Join Date: Aug 2017 Location: Northeast Ga Posts: 112 Trader Rating: (0) Feedback Score: 0 reviews	S14s don't have rods they have a big tube that sits on a bracket in the tank you will have to pull everything out and split the tube and check maybe clean the contacts